* [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment
@ 2014-01-16 21:57 Otavio Salvador
2014-01-16 21:57 ` [U-Boot] [PATCH 01/11] cgtqmx6eval: Set default environment to use zImage Otavio Salvador
` (12 more replies)
0 siblings, 13 replies; 21+ messages in thread
From: Otavio Salvador @ 2014-01-16 21:57 UTC (permalink / raw
To: u-boot
Hello,
This patchset does as stated in the subject. It has been build tested
as can be seen below:
Configuring for vf610twr - Board: vf610twr, Options: IMX_CONFIG=board/freescale/vf610twr/imximage.cfg
text data bss dec hex filename
203367 8666 212712 424745 67b29 ./u-boot
Configuring for udoo_quad - Board: udoo, Options: IMX_CONFIG=board/udoo/udoo.cfg,MX6Q,DDR_MB=1024
text data bss dec hex filename
217468 7882 218844 444194 6c722 ./u-boot
Configuring for mx6slevk - Board: mx6slevk, Options: IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL
text data bss dec hex filename
198964 7702 218568 425234 67d12 ./u-boot
Configuring for mx6qsabresd - Board: mx6sabresd, Options: IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q
text data bss dec hex filename
252239 58938 219028 530205 8171d ./u-boot
Configuring for mx6qsabreauto - Board: mx6qsabreauto, Options: IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q
text data bss dec hex filename
261433 9510 297784 568727 8ad97 ./u-boot
Configuring for mx6qarm2 - Board: mx6qarm2, Options: IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg
text data bss dec hex filename
192000 7414 218552 417966 660ae ./u-boot
Configuring for mx53loco - Board: mx53loco, Options: IMX_CONFIG=board/freescale/mx53loco/imximage.cfg
text data bss dec hex filename
281391 19282 307156 607829 94655 ./u-boot
Configuring for mx51evk - Board: mx51evk, Options: IMX_CONFIG=board/freescale/mx51evk/imximage.cfg
text data bss dec hex filename
268149 19126 301104 588379 8fa5b ./u-boot
Configuring for mx28evk - Board: mx28evk, Options: ENV_IS_IN_MMC
text data bss dec hex filename
431361 33206 326384 790951 c11a7 ./u-boot
6315 760 0 7075 1ba3 ./spl/u-boot-spl
Configuring for mx23evk board...
text data bss dec hex filename
209197 18636 304284 532117 81e95 ./u-boot
6307 164 0 6471 1947 ./spl/u-boot-spl
Configuring for hummingboard_solo - Board: hummingboard, Options: IMX_CONFIG=board/solidrun/hummingboard/solo.cfg,MX6S,DDR_MB=512
text data bss dec hex filename
209614 7878 236376 453868 6ecec ./u-boot
Configuring for cgtqmx6qeval - Board: cgtqmx6eval, Options: IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q
text data bss dec hex filename
186342 7506 218632 412480 64b40 ./u-boot
--------------------- SUMMARY ----------------------------
Boards compiled: 12
----------------------------------------------------------
Regards,
Otavio Salvador (11):
cgtqmx6eval: Set default environment to use zImage
hummingboard: Set default environment to use zImage
mx23evk: Set default environment to use zImage
mx28evk: Set default environment to use zImage
mx51evk: Set default environment to use zImage
mx53loco: Set default environment to use zImage
mx6qarm2: Set default environment to use zImage
mx6sabre_common: Set default environment to use zImage
mx6slevk: Set default environment to use zImage
udoo: Set default environment to use zImage
vf610twr: Set default environment to use zImage
include/configs/cgtqmx6eval.h | 14 +++++++-------
include/configs/hummingboard.h | 20 ++++++++++----------
include/configs/mx23evk.h | 12 ++++++------
include/configs/mx28evk.h | 26 +++++++++++++-------------
include/configs/mx51evk.h | 20 ++++++++++----------
include/configs/mx53loco.h | 20 ++++++++++----------
include/configs/mx6qarm2.h | 10 +++++-----
include/configs/mx6sabre_common.h | 20 ++++++++++----------
include/configs/mx6slevk.h | 20 ++++++++++----------
include/configs/udoo.h | 20 ++++++++++----------
include/configs/vf610twr.h | 20 ++++++++++----------
11 files changed, 101 insertions(+), 101 deletions(-)
--
1.8.5.2
^ permalink raw reply [flat|nested] 21+ messages in thread
* [U-Boot] [PATCH 01/11] cgtqmx6eval: Set default environment to use zImage
2014-01-16 21:57 [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment Otavio Salvador
@ 2014-01-16 21:57 ` Otavio Salvador
2014-01-16 21:57 ` [U-Boot] [PATCH 02/11] hummingboard: " Otavio Salvador
` (11 subsequent siblings)
12 siblings, 0 replies; 21+ messages in thread
From: Otavio Salvador @ 2014-01-16 21:57 UTC (permalink / raw
To: u-boot
Change the default environment to use zImage instead of uImage, this
requires changes to the default environment to load a file named
zImage instead of uImage, and to use the 'bootz' command instead of
'bootm' when booting the kernel.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
include/configs/cgtqmx6eval.h | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h
index 29a023c..b189bf1 100644
--- a/include/configs/cgtqmx6eval.h
+++ b/include/configs/cgtqmx6eval.h
@@ -75,7 +75,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
- "uimage=uImage\0" \
+ "image=zImage\0" \
"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
"boot_dir=/boot\0" \
"console=ttymxc1\0" \
@@ -92,24 +92,24 @@
"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
- "loaduimage=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
- "${boot_dir}/${uimage}\0" \
+ "loadimage=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
+ "${boot_dir}/${image}\0" \
"loadfdt=ext2load mmc ${mmcdev}:${mmcpart} ${fdt_addr} " \
"${boot_dir}/${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
- "bootm; " \
+ "bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
- "bootm; " \
+ "bootz; " \
"fi;\0"
#define CONFIG_BOOTCOMMAND \
@@ -118,7 +118,7 @@
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
- "if run loaduimage; then " \
+ "if run loadimage; then " \
"run mmcboot; " \
"else "\
"echo ERR: Fail to boot from mmc; " \
--
1.8.5.2
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [U-Boot] [PATCH 02/11] hummingboard: Set default environment to use zImage
2014-01-16 21:57 [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment Otavio Salvador
2014-01-16 21:57 ` [U-Boot] [PATCH 01/11] cgtqmx6eval: Set default environment to use zImage Otavio Salvador
@ 2014-01-16 21:57 ` Otavio Salvador
2014-01-16 21:57 ` [U-Boot] [PATCH 03/11] mx23evk: " Otavio Salvador
` (10 subsequent siblings)
12 siblings, 0 replies; 21+ messages in thread
From: Otavio Salvador @ 2014-01-16 21:57 UTC (permalink / raw
To: u-boot
Change the default environment to use zImage instead of uImage, this
requires changes to the default environment to load a file named
zImage instead of uImage, and to use the 'bootz' command instead of
'bootm' when booting the kernel.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
include/configs/hummingboard.h | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/include/configs/hummingboard.h b/include/configs/hummingboard.h
index 4055af5..ac65620 100644
--- a/include/configs/hummingboard.h
+++ b/include/configs/hummingboard.h
@@ -92,7 +92,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
- "uimage=uImage\0" \
+ "image=zImage\0" \
"console=ttymxc0\0" \
"splashpos=m,m\0" \
"fdt_high=0xffffffff\0" \
@@ -124,22 +124,22 @@
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
- "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
- "bootm; " \
+ "bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
- "bootm; " \
+ "bootz; " \
"fi;\0" \
"netargs=setenv bootargs console=${console},${baudrate} " \
"root=/dev/nfs " \
@@ -151,19 +151,19 @@
"else " \
"setenv get_cmd tftp; " \
"fi; " \
- "${get_cmd} ${uimage}; " \
+ "${get_cmd} ${image}; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
- "bootm; " \
+ "bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
- "bootm; " \
+ "bootz; " \
"fi;\0"
#define CONFIG_BOOTCOMMAND \
@@ -171,7 +171,7 @@
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
- "if run loaduimage; then " \
+ "if run loadimage; then " \
"run mmcboot; " \
"else run netboot; " \
"fi; " \
--
1.8.5.2
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [U-Boot] [PATCH 03/11] mx23evk: Set default environment to use zImage
2014-01-16 21:57 [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment Otavio Salvador
2014-01-16 21:57 ` [U-Boot] [PATCH 01/11] cgtqmx6eval: Set default environment to use zImage Otavio Salvador
2014-01-16 21:57 ` [U-Boot] [PATCH 02/11] hummingboard: " Otavio Salvador
@ 2014-01-16 21:57 ` Otavio Salvador
2014-01-16 21:57 ` [U-Boot] [PATCH 04/11] mx28evk: " Otavio Salvador
` (9 subsequent siblings)
12 siblings, 0 replies; 21+ messages in thread
From: Otavio Salvador @ 2014-01-16 21:57 UTC (permalink / raw
To: u-boot
Change the default environment to use zImage instead of uImage, this
requires changes to the default environment to load a file named
zImage instead of uImage, and to use the 'bootz' command instead of
'bootm' when booting the kernel.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
include/configs/mx23evk.h | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/include/configs/mx23evk.h b/include/configs/mx23evk.h
index 1b40a36..b496892 100644
--- a/include/configs/mx23evk.h
+++ b/include/configs/mx23evk.h
@@ -84,7 +84,7 @@
"fi ; " \
"fi\0" \
"script=boot.scr\0" \
- "uimage=uImage\0" \
+ "image=zImage\0" \
"console=ttyAMA0\0" \
"fdt_file=imx23-evk.dtb\0" \
"fdt_addr=0x41000000\0" \
@@ -98,22 +98,22 @@
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
- "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
- "bootm; " \
+ "bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
- "bootm; " \
+ "bootz; " \
"fi;\0"
#define CONFIG_BOOTCOMMAND \
@@ -121,7 +121,7 @@
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
- "if run loaduimage; then " \
+ "if run loadimage; then " \
"run mmcboot; " \
"else " \
"echo ERR: Fail to boot from MMC; " \
--
1.8.5.2
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [U-Boot] [PATCH 04/11] mx28evk: Set default environment to use zImage
2014-01-16 21:57 [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment Otavio Salvador
` (2 preceding siblings ...)
2014-01-16 21:57 ` [U-Boot] [PATCH 03/11] mx23evk: " Otavio Salvador
@ 2014-01-16 21:57 ` Otavio Salvador
2014-01-16 21:58 ` [U-Boot] [PATCH 05/11] mx51evk: " Otavio Salvador
` (8 subsequent siblings)
12 siblings, 0 replies; 21+ messages in thread
From: Otavio Salvador @ 2014-01-16 21:57 UTC (permalink / raw
To: u-boot
Change the default environment to use zImage instead of uImage, this
requires changes to the default environment to load a file named
zImage instead of uImage, and to use the 'bootz' command instead of
'bootm' when booting the kernel.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
include/configs/mx28evk.h | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index 4fd67eb..9b9124a 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -198,7 +198,7 @@
"else " \
"setenv get_cmd tftp; " \
"fi; " \
- "${get_cmd} ${uimage}; " \
+ "${get_cmd} ${image}; " \
"nand write ${loadaddr} kernel ${filesize}\0" \
"update_nand_fdt=" /* Update fdt */ \
"mtdparts default; " \
@@ -230,10 +230,10 @@
"nand read ${loadaddr} kernel 0x00400000; " \
"if test ${boot_fdt} = yes; then " \
"nand read ${fdt_addr} fdt 0x00080000; " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = no; then " \
- "bootm; " \
+ "bootz; " \
"else " \
"echo \"ERROR: Set boot_fdt to yes or no.\"; " \
"fi; " \
@@ -248,7 +248,7 @@
"fi ; " \
"fi\0" \
"script=boot.scr\0" \
- "uimage=uImage\0" \
+ "image=zImage\0" \
"console_fsl=ttyAM0\0" \
"console_mainline=ttyAMA0\0" \
"fdt_file=imx28-evk.dtb\0" \
@@ -264,22 +264,22 @@
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
- "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
- "bootm; " \
+ "bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
- "bootm; " \
+ "bootz; " \
"fi;\0" \
"netargs=setenv bootargs console=${console_mainline},${baudrate} " \
"root=/dev/nfs " \
@@ -291,19 +291,19 @@
"else " \
"setenv get_cmd tftp; " \
"fi; " \
- "${get_cmd} ${uimage}; " \
+ "${get_cmd} ${image}; " \
"if test ${boot_fdt} = yes; then " \
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
- "bootm; " \
+ "bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi;" \
"fi; " \
"else " \
- "bootm; " \
+ "bootz; " \
"fi;\0"
#define CONFIG_BOOTCOMMAND \
@@ -311,7 +311,7 @@
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
- "if run loaduimage; then " \
+ "if run loadimage; then " \
"run mmcboot; " \
"else run netboot; " \
"fi; " \
--
1.8.5.2
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [U-Boot] [PATCH 05/11] mx51evk: Set default environment to use zImage
2014-01-16 21:57 [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment Otavio Salvador
` (3 preceding siblings ...)
2014-01-16 21:57 ` [U-Boot] [PATCH 04/11] mx28evk: " Otavio Salvador
@ 2014-01-16 21:58 ` Otavio Salvador
2014-01-16 21:58 ` [U-Boot] [PATCH 06/11] mx53loco: " Otavio Salvador
` (7 subsequent siblings)
12 siblings, 0 replies; 21+ messages in thread
From: Otavio Salvador @ 2014-01-16 21:58 UTC (permalink / raw
To: u-boot
Change the default environment to use zImage instead of uImage, this
requires changes to the default environment to load a file named
zImage instead of uImage, and to use the 'bootz' command instead of
'bootm' when booting the kernel.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
include/configs/mx51evk.h | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 1cff171..b389475 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -143,7 +143,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
- "uimage=uImage\0" \
+ "image=zImage\0" \
"fdt_file=imx51-babbage.dtb\0" \
"fdt_addr=0x91000000\0" \
"boot_fdt=try\0" \
@@ -157,22 +157,22 @@
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
- "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
- "bootm; " \
+ "bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
- "bootm; " \
+ "bootz; " \
"fi;\0" \
"netargs=setenv bootargs console=ttymxc0,${baudrate} " \
"root=/dev/nfs " \
@@ -184,20 +184,20 @@
"else " \
"setenv get_cmd tftp; " \
"fi; " \
- "${get_cmd} ${uimage}; " \
+ "${get_cmd} ${image}; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
- "bootm; " \
+ "bootz; " \
"else " \
"echo ERROR: Cannot load the DT; " \
"exit; " \
"fi; " \
"fi; " \
"else " \
- "bootm; " \
+ "bootz; " \
"fi;\0"
#define CONFIG_BOOTCOMMAND \
@@ -205,7 +205,7 @@
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
- "if run loaduimage; then " \
+ "if run loadimage; then " \
"run mmcboot; " \
"else run netboot; " \
"fi; " \
--
1.8.5.2
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [U-Boot] [PATCH 06/11] mx53loco: Set default environment to use zImage
2014-01-16 21:57 [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment Otavio Salvador
` (4 preceding siblings ...)
2014-01-16 21:58 ` [U-Boot] [PATCH 05/11] mx51evk: " Otavio Salvador
@ 2014-01-16 21:58 ` Otavio Salvador
2014-01-16 21:58 ` [U-Boot] [PATCH 07/11] mx6qarm2: " Otavio Salvador
` (6 subsequent siblings)
12 siblings, 0 replies; 21+ messages in thread
From: Otavio Salvador @ 2014-01-16 21:58 UTC (permalink / raw
To: u-boot
Change the default environment to use zImage instead of uImage, this
requires changes to the default environment to load a file named
zImage instead of uImage, and to use the 'bootz' command instead of
'bootm' when booting the kernel.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
include/configs/mx53loco.h | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index ae43ea3..77f8567 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -103,7 +103,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
- "uimage=uImage\0" \
+ "image=zImage\0" \
"fdt_file=imx53-qsb.dtb\0" \
"fdt_addr=0x71000000\0" \
"boot_fdt=try\0" \
@@ -116,22 +116,22 @@
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
- "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
- "bootm; " \
+ "bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
- "bootm; " \
+ "bootz; " \
"fi;\0" \
"netargs=setenv bootargs console=ttymxc0,${baudrate} " \
"root=/dev/nfs " \
@@ -143,20 +143,20 @@
"else " \
"setenv get_cmd tftp; " \
"fi; " \
- "${get_cmd} ${uimage}; " \
+ "${get_cmd} ${image}; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
- "bootm; " \
+ "bootz; " \
"else " \
"echo ERROR: Cannot load the DT; " \
"exit; " \
"fi; " \
"fi; " \
"else " \
- "bootm; " \
+ "bootz; " \
"fi;\0"
#define CONFIG_BOOTCOMMAND \
@@ -164,7 +164,7 @@
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
- "if run loaduimage; then " \
+ "if run loadimage; then " \
"run mmcboot; " \
"else run netboot; " \
"fi; " \
--
1.8.5.2
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [U-Boot] [PATCH 07/11] mx6qarm2: Set default environment to use zImage
2014-01-16 21:57 [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment Otavio Salvador
` (5 preceding siblings ...)
2014-01-16 21:58 ` [U-Boot] [PATCH 06/11] mx53loco: " Otavio Salvador
@ 2014-01-16 21:58 ` Otavio Salvador
2014-01-16 21:58 ` [U-Boot] [PATCH 08/11] mx6sabre_common: " Otavio Salvador
` (5 subsequent siblings)
12 siblings, 0 replies; 21+ messages in thread
From: Otavio Salvador @ 2014-01-16 21:58 UTC (permalink / raw
To: u-boot
Change the default environment to use zImage instead of uImage, this
requires changes to the default environment to load a file named
zImage instead of uImage, and to use the 'bootz' command instead of
'bootm' when booting the kernel.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
include/configs/mx6qarm2.h | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
index f0a82d1..fd651cf 100644
--- a/include/configs/mx6qarm2.h
+++ b/include/configs/mx6qarm2.h
@@ -72,7 +72,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
- "uimage=uImage\0" \
+ "image=zImage\0" \
"console=ttymxc3\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
@@ -85,16 +85,16 @@
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
- "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
- "bootm\0" \
+ "bootz\0" \
"netargs=setenv bootargs console=${console},${baudrate} " \
"root=/dev/nfs " \
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
"netboot=echo Booting from net ...; " \
"run netargs; " \
- "dhcp ${uimage}; bootm\0" \
+ "dhcp ${image}; bootz\0" \
#define CONFIG_BOOTCOMMAND \
"mmc dev ${mmcdev};" \
@@ -102,7 +102,7 @@
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
- "if run loaduimage; then " \
+ "if run loadimage; then " \
"run mmcboot; " \
"else run netboot; " \
"fi; " \
--
1.8.5.2
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [U-Boot] [PATCH 08/11] mx6sabre_common: Set default environment to use zImage
2014-01-16 21:57 [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment Otavio Salvador
` (6 preceding siblings ...)
2014-01-16 21:58 ` [U-Boot] [PATCH 07/11] mx6qarm2: " Otavio Salvador
@ 2014-01-16 21:58 ` Otavio Salvador
2014-01-16 21:58 ` [U-Boot] [PATCH 09/11] mx6slevk: " Otavio Salvador
` (4 subsequent siblings)
12 siblings, 0 replies; 21+ messages in thread
From: Otavio Salvador @ 2014-01-16 21:58 UTC (permalink / raw
To: u-boot
Change the default environment to use zImage instead of uImage, this
requires changes to the default environment to load a file named
zImage instead of uImage, and to use the 'bootz' command instead of
'bootm' when booting the kernel.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
include/configs/mx6sabre_common.h | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index 5ee7fa5..4efcebf 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -119,7 +119,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
- "uimage=uImage\0" \
+ "image=zImage\0" \
"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
"fdt_addr=0x18000000\0" \
"boot_fdt=try\0" \
@@ -150,22 +150,22 @@
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
- "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
- "bootm; " \
+ "bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
- "bootm; " \
+ "bootz; " \
"fi;\0" \
"netargs=setenv bootargs console=${console},${baudrate} " \
"root=/dev/nfs " \
@@ -177,19 +177,19 @@
"else " \
"setenv get_cmd tftp; " \
"fi; " \
- "${get_cmd} ${uimage}; " \
+ "${get_cmd} ${image}; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
- "bootm; " \
+ "bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
- "bootm; " \
+ "bootz; " \
"fi;\0"
#define CONFIG_BOOTCOMMAND \
@@ -198,7 +198,7 @@
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
- "if run loaduimage; then " \
+ "if run loadimage; then " \
"run mmcboot; " \
"else run netboot; " \
"fi; " \
--
1.8.5.2
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [U-Boot] [PATCH 09/11] mx6slevk: Set default environment to use zImage
2014-01-16 21:57 [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment Otavio Salvador
` (7 preceding siblings ...)
2014-01-16 21:58 ` [U-Boot] [PATCH 08/11] mx6sabre_common: " Otavio Salvador
@ 2014-01-16 21:58 ` Otavio Salvador
2014-01-16 21:58 ` [U-Boot] [PATCH 10/11] udoo: " Otavio Salvador
` (3 subsequent siblings)
12 siblings, 0 replies; 21+ messages in thread
From: Otavio Salvador @ 2014-01-16 21:58 UTC (permalink / raw
To: u-boot
Change the default environment to use zImage instead of uImage, this
requires changes to the default environment to load a file named
zImage instead of uImage, and to use the 'bootz' command instead of
'bootm' when booting the kernel.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
include/configs/mx6slevk.h | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index b29f78c..5d88dc4 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -76,7 +76,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
- "uimage=uImage\0" \
+ "image=zImage\0" \
"console=ttymxc0\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
@@ -93,22 +93,22 @@
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
- "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
- "bootm; " \
+ "bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
- "bootm; " \
+ "bootz; " \
"fi;\0" \
"netargs=setenv bootargs console=${console},${baudrate} " \
"root=/dev/nfs " \
@@ -120,19 +120,19 @@
"else " \
"setenv get_cmd tftp; " \
"fi; " \
- "${get_cmd} ${uimage}; " \
+ "${get_cmd} ${image}; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
- "bootm; " \
+ "bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
- "bootm; " \
+ "bootz; " \
"fi;\0"
#define CONFIG_BOOTCOMMAND \
@@ -141,7 +141,7 @@
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
- "if run loaduimage; then " \
+ "if run loadimage; then " \
"run mmcboot; " \
"else run netboot; " \
"fi; " \
--
1.8.5.2
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [U-Boot] [PATCH 10/11] udoo: Set default environment to use zImage
2014-01-16 21:57 [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment Otavio Salvador
` (8 preceding siblings ...)
2014-01-16 21:58 ` [U-Boot] [PATCH 09/11] mx6slevk: " Otavio Salvador
@ 2014-01-16 21:58 ` Otavio Salvador
2014-01-16 21:58 ` [U-Boot] [PATCH 11/11] vf610twr: " Otavio Salvador
` (2 subsequent siblings)
12 siblings, 0 replies; 21+ messages in thread
From: Otavio Salvador @ 2014-01-16 21:58 UTC (permalink / raw
To: u-boot
Change the default environment to use zImage instead of uImage, this
requires changes to the default environment to load a file named
zImage instead of uImage, and to use the 'bootz' command instead of
'bootm' when booting the kernel.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
include/configs/udoo.h | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/include/configs/udoo.h b/include/configs/udoo.h
index 614e1fe..7f09489 100644
--- a/include/configs/udoo.h
+++ b/include/configs/udoo.h
@@ -100,7 +100,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
- "uimage=uImage\0" \
+ "image=zImage\0" \
"console=ttymxc1\0" \
"splashpos=m,m\0" \
"fdt_high=0xffffffff\0" \
@@ -132,22 +132,22 @@
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
- "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
- "bootm; " \
+ "bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
- "bootm; " \
+ "bootz; " \
"fi;\0" \
"netargs=setenv bootargs console=${console},${baudrate} " \
"root=/dev/nfs " \
@@ -159,19 +159,19 @@
"else " \
"setenv get_cmd tftp; " \
"fi; " \
- "${get_cmd} ${uimage}; " \
+ "${get_cmd} ${image}; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
- "bootm; " \
+ "bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
- "bootm; " \
+ "bootz; " \
"fi;\0"
#define CONFIG_BOOTCOMMAND \
@@ -179,7 +179,7 @@
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
- "if run loaduimage; then " \
+ "if run loadimage; then " \
"run mmcboot; " \
"else run netboot; " \
"fi; " \
--
1.8.5.2
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [U-Boot] [PATCH 11/11] vf610twr: Set default environment to use zImage
2014-01-16 21:57 [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment Otavio Salvador
` (9 preceding siblings ...)
2014-01-16 21:58 ` [U-Boot] [PATCH 10/11] udoo: " Otavio Salvador
@ 2014-01-16 21:58 ` Otavio Salvador
2014-01-16 22:14 ` [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment Wolfgang Denk
2014-02-11 10:06 ` Stefano Babic
12 siblings, 0 replies; 21+ messages in thread
From: Otavio Salvador @ 2014-01-16 21:58 UTC (permalink / raw
To: u-boot
Change the default environment to use zImage instead of uImage, this
requires changes to the default environment to load a file named
zImage instead of uImage, and to use the 'bootz' command instead of
'bootm' when booting the kernel.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
include/configs/vf610twr.h | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index 8d0a00d..500fd2f 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -81,7 +81,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
- "uimage=uImage\0" \
+ "image=zImage\0" \
"console=ttyLP1\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
@@ -112,22 +112,22 @@
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
- "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
- "bootm; " \
+ "bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
- "bootm; " \
+ "bootz; " \
"fi;\0" \
"netargs=setenv bootargs console=${console},${baudrate} " \
"root=/dev/nfs " \
@@ -139,19 +139,19 @@
"else " \
"setenv get_cmd tftp; " \
"fi; " \
- "${get_cmd} ${uimage}; " \
+ "${get_cmd} ${image}; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
- "bootm; " \
+ "bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
- "bootm; " \
+ "bootz; " \
"fi;\0"
#define CONFIG_BOOTCOMMAND \
@@ -159,7 +159,7 @@
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
- "if run loaduimage; then " \
+ "if run loadimage; then " \
"run mmcboot; " \
"else run netboot; " \
"fi; " \
--
1.8.5.2
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment
2014-01-16 21:57 [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment Otavio Salvador
` (10 preceding siblings ...)
2014-01-16 21:58 ` [U-Boot] [PATCH 11/11] vf610twr: " Otavio Salvador
@ 2014-01-16 22:14 ` Wolfgang Denk
2014-01-17 12:56 ` Marek Vasut
2014-02-11 13:15 ` Marek Vasut
2014-02-11 10:06 ` Stefano Babic
12 siblings, 2 replies; 21+ messages in thread
From: Wolfgang Denk @ 2014-01-16 22:14 UTC (permalink / raw
To: u-boot
Dear Otavio Salvador,
In message <1389909486-12880-1-git-send-email-otavio@ossystems.com.br> you wrote:
>
>
> This patchset does as stated in the subject. It has been build tested
> as can be seen below:
What is the motivation for this change? Using zImage is - from the
technical point of view - the poorest of the available choices. If
you are not happy with using uImages, then why do you not move forward
and use FIT images?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
First, we must do our own personal work, then we tend the necessary
work of our family, then our community, then the world. - Lao-tzu
^ permalink raw reply [flat|nested] 21+ messages in thread
* [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment
2014-01-16 22:14 ` [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment Wolfgang Denk
@ 2014-01-17 12:56 ` Marek Vasut
2014-02-11 13:15 ` Marek Vasut
1 sibling, 0 replies; 21+ messages in thread
From: Marek Vasut @ 2014-01-17 12:56 UTC (permalink / raw
To: u-boot
On Thursday, January 16, 2014 at 11:14:44 PM, Wolfgang Denk wrote:
> Dear Otavio Salvador,
>
> In message <1389909486-12880-1-git-send-email-otavio@ossystems.com.br> you
wrote:
> > This patchset does as stated in the subject. It has been build tested
>
> > as can be seen below:
> What is the motivation for this change? Using zImage is - from the
> technical point of view - the poorest of the available choices. If
> you are not happy with using uImages, then why do you not move forward
> and use FIT images?
I am with you here. zImage is not a good format, since it's inflexible and not
protected by anything (no checksum etc) at all. For deployment, it's even more
poor choice.
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 21+ messages in thread
* [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment
2014-01-16 21:57 [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment Otavio Salvador
` (11 preceding siblings ...)
2014-01-16 22:14 ` [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment Wolfgang Denk
@ 2014-02-11 10:06 ` Stefano Babic
12 siblings, 0 replies; 21+ messages in thread
From: Stefano Babic @ 2014-02-11 10:06 UTC (permalink / raw
To: u-boot
Hi Otavio,
On 16/01/2014 22:57, Otavio Salvador wrote:
> Hello,
>
> This patchset does as stated in the subject. It has been build tested
> as can be seen below:
>
> Configuring for vf610twr - Board: vf610twr, Options: IMX_CONFIG=board/freescale/vf610twr/imximage.cfg
> text data bss dec hex filename
> 203367 8666 212712 424745 67b29 ./u-boot
> Configuring for udoo_quad - Board: udoo, Options: IMX_CONFIG=board/udoo/udoo.cfg,MX6Q,DDR_MB=1024
> text data bss dec hex filename
> 217468 7882 218844 444194 6c722 ./u-boot
> Configuring for mx6slevk - Board: mx6slevk, Options: IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL
> text data bss dec hex filename
> 198964 7702 218568 425234 67d12 ./u-boot
> Configuring for mx6qsabresd - Board: mx6sabresd, Options: IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q
> text data bss dec hex filename
> 252239 58938 219028 530205 8171d ./u-boot
> Configuring for mx6qsabreauto - Board: mx6qsabreauto, Options: IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q
> text data bss dec hex filename
> 261433 9510 297784 568727 8ad97 ./u-boot
> Configuring for mx6qarm2 - Board: mx6qarm2, Options: IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg
> text data bss dec hex filename
> 192000 7414 218552 417966 660ae ./u-boot
> Configuring for mx53loco - Board: mx53loco, Options: IMX_CONFIG=board/freescale/mx53loco/imximage.cfg
> text data bss dec hex filename
> 281391 19282 307156 607829 94655 ./u-boot
> Configuring for mx51evk - Board: mx51evk, Options: IMX_CONFIG=board/freescale/mx51evk/imximage.cfg
> text data bss dec hex filename
> 268149 19126 301104 588379 8fa5b ./u-boot
> Configuring for mx28evk - Board: mx28evk, Options: ENV_IS_IN_MMC
> text data bss dec hex filename
> 431361 33206 326384 790951 c11a7 ./u-boot
> 6315 760 0 7075 1ba3 ./spl/u-boot-spl
> Configuring for mx23evk board...
> text data bss dec hex filename
> 209197 18636 304284 532117 81e95 ./u-boot
> 6307 164 0 6471 1947 ./spl/u-boot-spl
> Configuring for hummingboard_solo - Board: hummingboard, Options: IMX_CONFIG=board/solidrun/hummingboard/solo.cfg,MX6S,DDR_MB=512
> text data bss dec hex filename
> 209614 7878 236376 453868 6ecec ./u-boot
> Configuring for cgtqmx6qeval - Board: cgtqmx6eval, Options: IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q
> text data bss dec hex filename
> 186342 7506 218632 412480 64b40 ./u-boot
>
> --------------------- SUMMARY ----------------------------
> Boards compiled: 12
> ----------------------------------------------------------
>
> Regards,
>
>
Whole patchset applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 21+ messages in thread
* [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment
2014-01-16 22:14 ` [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment Wolfgang Denk
2014-01-17 12:56 ` Marek Vasut
@ 2014-02-11 13:15 ` Marek Vasut
2014-02-11 14:16 ` Stefano Babic
1 sibling, 1 reply; 21+ messages in thread
From: Marek Vasut @ 2014-02-11 13:15 UTC (permalink / raw
To: u-boot
On Thursday, January 16, 2014 at 11:14:44 PM, Wolfgang Denk wrote:
> Dear Otavio Salvador,
>
> In message <1389909486-12880-1-git-send-email-otavio@ossystems.com.br> you
wrote:
> > This patchset does as stated in the subject. It has been build tested
>
> > as can be seen below:
> What is the motivation for this change? Using zImage is - from the
> technical point of view - the poorest of the available choices. If
> you are not happy with using uImages, then why do you not move forward
> and use FIT images?
I see the patchset was applied, but this question was not answered.
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 21+ messages in thread
* [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment
2014-02-11 13:15 ` Marek Vasut
@ 2014-02-11 14:16 ` Stefano Babic
2014-02-12 7:49 ` Marek Vasut
0 siblings, 1 reply; 21+ messages in thread
From: Stefano Babic @ 2014-02-11 14:16 UTC (permalink / raw
To: u-boot
Hi Marek,
On 11/02/2014 14:15, Marek Vasut wrote:
> On Thursday, January 16, 2014 at 11:14:44 PM, Wolfgang Denk wrote:
>> Dear Otavio Salvador,
>>
>> In message <1389909486-12880-1-git-send-email-otavio@ossystems.com.br> you
> wrote:
>>> This patchset does as stated in the subject. It has been build tested
>>
>>> as can be seen below:
>> What is the motivation for this change? Using zImage is - from the
>> technical point of view - the poorest of the available choices. If
>> you are not happy with using uImages, then why do you not move forward
>> and use FIT images?
>
> I see the patchset was applied, but this question was not answered.
I have not seen the question, sorry. Rather patchwork did not show me
the right thread, as it showed me only the comments for Patches 1-11 :-(
Anyway, I think the discussion is a bit away from which is the best
image. IMHO the board maintainer can decide which is the more suitable
default environment he needs, and in this case, he decided for a "raw
image" like zimage. We can argument which is the best one as on the ARM
ML, but I have no other arguments to block such kind of patches.
I am missing Simon's patches to move the "default" environment outside
of the configuration file: I can imagine that using different ".env" can
solve part of the problems we have with CONFIG_EXTRA_ENV_SETTINGS, that
is become more and more complex, and can help to fine tuning the default
environment.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 21+ messages in thread
* [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment
2014-02-11 14:16 ` Stefano Babic
@ 2014-02-12 7:49 ` Marek Vasut
2014-02-12 13:11 ` Stefano Babic
0 siblings, 1 reply; 21+ messages in thread
From: Marek Vasut @ 2014-02-12 7:49 UTC (permalink / raw
To: u-boot
On Tuesday, February 11, 2014 at 03:16:51 PM, Stefano Babic wrote:
> Hi Marek,
>
> On 11/02/2014 14:15, Marek Vasut wrote:
> > On Thursday, January 16, 2014 at 11:14:44 PM, Wolfgang Denk wrote:
> >> Dear Otavio Salvador,
> >>
> >> In message <1389909486-12880-1-git-send-email-otavio@ossystems.com.br>
> >> you
> >
> > wrote:
> >>> This patchset does as stated in the subject. It has been build tested
> >>
> >>> as can be seen below:
> >> What is the motivation for this change? Using zImage is - from the
> >> technical point of view - the poorest of the available choices. If
> >> you are not happy with using uImages, then why do you not move forward
> >> and use FIT images?
> >
> > I see the patchset was applied, but this question was not answered.
>
> I have not seen the question, sorry. Rather patchwork did not show me
> the right thread, as it showed me only the comments for Patches 1-11 :-(
>
> Anyway, I think the discussion is a bit away from which is the best
> image. IMHO the board maintainer can decide which is the more suitable
> default environment he needs
So, do we now accept new built-in environment changes again? I will re-submit my
changes to the default environment for the boards I maintain if you don't mind
then.
Also, I don't see Otavio being the maintainer of most of these boards.
[...]
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 21+ messages in thread
* [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment
2014-02-12 7:49 ` Marek Vasut
@ 2014-02-12 13:11 ` Stefano Babic
2014-02-12 14:08 ` Marek Vasut
2014-02-12 17:43 ` Simon Glass
0 siblings, 2 replies; 21+ messages in thread
From: Stefano Babic @ 2014-02-12 13:11 UTC (permalink / raw
To: u-boot
Hi Marek,
On 12/02/2014 08:49, Marek Vasut wrote:
>>
>> Anyway, I think the discussion is a bit away from which is the best
>> image. IMHO the board maintainer can decide which is the more suitable
>> default environment he needs
>
> So, do we now accept new built-in environment changes again?
My good point to refuse them was that Simon's patches to move built-in
environment to a .env file are quite ready to be merged. I will be happy
if they can find the way to go in, as they can clean up the whole mess
we have. Checking only the i.MXes boards, most CONFIG_EXTRA_ENV_SETTINGS
are cut&paste from other boards, with some minor changes making them
inconsistent. The good exception are the sabre boards, because they use
the same common file.
I am taking a look if we can at least guarantee that all these boards
can have the same built-in environment, because it seems clear that
this is what we want to reach.
> I will re-submit my
> changes to the default environment for the boards I maintain if you don't mind
> then.
I cannot refuse them, I cannot (yet) offer a good alternative. Send them.
>
> Also, I don't see Otavio being the maintainer of most of these boards.
True, but maintainers (Fabio, Alison) were informed in CC. The patchset
is quite a month old and I had to decide myself if there is a good
reason to reject them - I cannot find it.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 21+ messages in thread
* [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment
2014-02-12 13:11 ` Stefano Babic
@ 2014-02-12 14:08 ` Marek Vasut
2014-02-12 17:43 ` Simon Glass
1 sibling, 0 replies; 21+ messages in thread
From: Marek Vasut @ 2014-02-12 14:08 UTC (permalink / raw
To: u-boot
On Wednesday, February 12, 2014 at 02:11:23 PM, Stefano Babic wrote:
> Hi Marek,
>
> On 12/02/2014 08:49, Marek Vasut wrote:
> >> Anyway, I think the discussion is a bit away from which is the best
> >> image. IMHO the board maintainer can decide which is the more suitable
> >> default environment he needs
> >
> > So, do we now accept new built-in environment changes again?
>
> My good point to refuse them was that Simon's patches to move built-in
> environment to a .env file are quite ready to be merged. I will be happy
> if they can find the way to go in, as they can clean up the whole mess
> we have. Checking only the i.MXes boards, most CONFIG_EXTRA_ENV_SETTINGS
> are cut&paste from other boards, with some minor changes making them
> inconsistent. The good exception are the sabre boards, because they use
> the same common file.
>
> I am taking a look if we can at least guarantee that all these boards
> can have the same built-in environment, because it seems clear that
> this is what we want to reach.
>
> > I will re-submit my
> > changes to the default environment for the boards I maintain if you don't
> > mind then.
>
> I cannot refuse them, I cannot (yet) offer a good alternative. Send them.
Good. I will send them when ELDK 5.5 is out, by that time they will be final.
> > Also, I don't see Otavio being the maintainer of most of these boards.
>
> True, but maintainers (Fabio, Alison) were informed in CC. The patchset
> is quite a month old and I had to decide myself if there is a good
> reason to reject them - I cannot find it.
Were the patches ACKed by either of them ? There was simply no activity, which
does not look like a good enough reason to accept patches ...
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 21+ messages in thread
* [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment
2014-02-12 13:11 ` Stefano Babic
2014-02-12 14:08 ` Marek Vasut
@ 2014-02-12 17:43 ` Simon Glass
1 sibling, 0 replies; 21+ messages in thread
From: Simon Glass @ 2014-02-12 17:43 UTC (permalink / raw
To: u-boot
Hi Stefano,
On 12 February 2014 06:11, Stefano Babic <sbabic@denx.de> wrote:
>
> Hi Marek,
>
> On 12/02/2014 08:49, Marek Vasut wrote:
>
> >>
> >> Anyway, I think the discussion is a bit away from which is the best
> >> image. IMHO the board maintainer can decide which is the more suitable
> >> default environment he needs
> >
> > So, do we now accept new built-in environment changes again?
>
> My good point to refuse them was that Simon's patches to move built-in
> environment to a .env file are quite ready to be merged. I will be happy
> if they can find the way to go in, as they can clean up the whole mess
> we have. Checking only the i.MXes boards, most CONFIG_EXTRA_ENV_SETTINGS
> are cut&paste from other boards, with some minor changes making them
> inconsistent. The good exception are the sabre boards, because they use
> the same common file.
I am not sure about the .env file patches. I am really not keen on
creating another environment method which doesn't solve the problems
of the existing one. I'll take another look at it sometime and see if
there is any way to square the circle.
Regards,
Simon
^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2014-02-12 17:43 UTC | newest]
Thread overview: 21+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-01-16 21:57 [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment Otavio Salvador
2014-01-16 21:57 ` [U-Boot] [PATCH 01/11] cgtqmx6eval: Set default environment to use zImage Otavio Salvador
2014-01-16 21:57 ` [U-Boot] [PATCH 02/11] hummingboard: " Otavio Salvador
2014-01-16 21:57 ` [U-Boot] [PATCH 03/11] mx23evk: " Otavio Salvador
2014-01-16 21:57 ` [U-Boot] [PATCH 04/11] mx28evk: " Otavio Salvador
2014-01-16 21:58 ` [U-Boot] [PATCH 05/11] mx51evk: " Otavio Salvador
2014-01-16 21:58 ` [U-Boot] [PATCH 06/11] mx53loco: " Otavio Salvador
2014-01-16 21:58 ` [U-Boot] [PATCH 07/11] mx6qarm2: " Otavio Salvador
2014-01-16 21:58 ` [U-Boot] [PATCH 08/11] mx6sabre_common: " Otavio Salvador
2014-01-16 21:58 ` [U-Boot] [PATCH 09/11] mx6slevk: " Otavio Salvador
2014-01-16 21:58 ` [U-Boot] [PATCH 10/11] udoo: " Otavio Salvador
2014-01-16 21:58 ` [U-Boot] [PATCH 11/11] vf610twr: " Otavio Salvador
2014-01-16 22:14 ` [U-Boot] [PATCH 0/11] Change some boards to use zImage in default environment Wolfgang Denk
2014-01-17 12:56 ` Marek Vasut
2014-02-11 13:15 ` Marek Vasut
2014-02-11 14:16 ` Stefano Babic
2014-02-12 7:49 ` Marek Vasut
2014-02-12 13:11 ` Stefano Babic
2014-02-12 14:08 ` Marek Vasut
2014-02-12 17:43 ` Simon Glass
2014-02-11 10:06 ` Stefano Babic
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.