* [Buildroot] [PATCH v2] sylpheed: Fix includedir
@ 2012-10-06 18:55 Valentine Barshak
2012-10-07 11:09 ` Arnout Vandecappelle
0 siblings, 1 reply; 3+ messages in thread
From: Valentine Barshak @ 2012-10-06 18:55 UTC (permalink / raw
To: buildroot
The sylpheed headers are installed to the target directory,
creating full staging directory path in the target rootfs,
which is wrong.
This happens because the headers are installed to
$(DESTDIR)$(includedir), while DESTDIR is $(TARGET_DIR)
and includedir is set to $(STAGING_DIR)/usr/include in the
SYLPHEED_CONF_OPT.
The includedir was set to staging include because sylpheed
incorrectly adds includedir to its include path, and does
not build with the default includedir set to /usr/include
in the target filesystem.
This removes includedir setting and also removes it from
include paths in Makefiles. The same approach is used
in the OE.
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
---
package/sylpheed/sylpheed.mk | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/package/sylpheed/sylpheed.mk b/package/sylpheed/sylpheed.mk
index 451c4de..100fd67 100644
--- a/package/sylpheed/sylpheed.mk
+++ b/package/sylpheed/sylpheed.mk
@@ -9,11 +9,18 @@ SYLPHEED_VERSION = $(SYLPHEED_VERSION_MAJOR).$(SYLPHEED_VERSION_MINOR)
SYLPHEED_SOURCE = sylpheed-$(SYLPHEED_VERSION).tar.bz2
SYLPHEED_SITE = http://sylpheed.sraoss.jp/sylpheed/v$(SYLPHEED_VERSION_MAJOR)
-SYLPHEED_CONF_OPT = --disable-gtkspell \
- --includedir=$(STAGING_DIR)/usr/include
+SYLPHEED_CONF_OPT = --disable-gtkspell
SYLPHEED_DEPENDENCIES = host-pkg-config libgtk2
+define SYLPHEED_PRECONFIGURE
+ for i in $$(find $(@D) -name "Makefile*"); do \
+ sed -i 's:-I$$(includedir)::g' $$i; \
+ done
+endef
+
+SYLPHEED_PRE_CONFIGURE_HOOKS += SYLPHEED_PRECONFIGURE
+
ifeq ($(BR2_PACKAGE_OPENSSL),y)
SYLPHEED_DEPENDENCIES += openssl
SYLPHEED_CONF_OPT += --enable-ssl
--
1.7.11.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [Buildroot] [PATCH v2] sylpheed: Fix includedir
2012-10-06 18:55 [Buildroot] [PATCH v2] sylpheed: Fix includedir Valentine Barshak
@ 2012-10-07 11:09 ` Arnout Vandecappelle
2012-10-07 22:39 ` Valentine Barshak
0 siblings, 1 reply; 3+ messages in thread
From: Arnout Vandecappelle @ 2012-10-07 11:09 UTC (permalink / raw
To: buildroot
On 06/10/12 20:55, Valentine Barshak wrote:
> The sylpheed headers are installed to the target directory,
> creating full staging directory path in the target rootfs,
> which is wrong.
> This happens because the headers are installed to
> $(DESTDIR)$(includedir), while DESTDIR is $(TARGET_DIR)
> and includedir is set to $(STAGING_DIR)/usr/include in the
> SYLPHEED_CONF_OPT.
>
> The includedir was set to staging include because sylpheed
> incorrectly adds includedir to its include path, and does
> not build with the default includedir set to /usr/include
> in the target filesystem.
>
> This removes includedir setting and also removes it from
> include paths in Makefiles. The same approach is used
> in the OE.
>
> Signed-off-by: Valentine Barshak<gvaxon@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
with a small addition:
> ---
> package/sylpheed/sylpheed.mk | 11 +++++++++--
> 1 file changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/package/sylpheed/sylpheed.mk b/package/sylpheed/sylpheed.mk
> index 451c4de..100fd67 100644
> --- a/package/sylpheed/sylpheed.mk
> +++ b/package/sylpheed/sylpheed.mk
> @@ -9,11 +9,18 @@ SYLPHEED_VERSION = $(SYLPHEED_VERSION_MAJOR).$(SYLPHEED_VERSION_MINOR)
> SYLPHEED_SOURCE = sylpheed-$(SYLPHEED_VERSION).tar.bz2
> SYLPHEED_SITE = http://sylpheed.sraoss.jp/sylpheed/v$(SYLPHEED_VERSION_MAJOR)
>
> -SYLPHEED_CONF_OPT = --disable-gtkspell \
> - --includedir=$(STAGING_DIR)/usr/include
> +SYLPHEED_CONF_OPT = --disable-gtkspell
>
> SYLPHEED_DEPENDENCIES = host-pkg-config libgtk2
>
> +define SYLPHEED_PRECONFIGURE
> + for i in $$(find $(@D) -name "Makefile*"); do \
> + sed -i 's:-I$$(includedir)::g' $$i; \
> + done
> +endef
Put a small explanatory comment here, e.g.:
# Remove the -I$(includedir) from the Makefile, because it would
# refer to the host's /usr/include.
Regards,
Arnout
> +
> +SYLPHEED_PRE_CONFIGURE_HOOKS += SYLPHEED_PRECONFIGURE
> +
> ifeq ($(BR2_PACKAGE_OPENSSL),y)
> SYLPHEED_DEPENDENCIES += openssl
> SYLPHEED_CONF_OPT += --enable-ssl
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286540
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Buildroot] [PATCH v2] sylpheed: Fix includedir
2012-10-07 11:09 ` Arnout Vandecappelle
@ 2012-10-07 22:39 ` Valentine Barshak
0 siblings, 0 replies; 3+ messages in thread
From: Valentine Barshak @ 2012-10-07 22:39 UTC (permalink / raw
To: buildroot
On 10/07/2012 03:09 PM, Arnout Vandecappelle wrote:
> On 06/10/12 20:55, Valentine Barshak wrote:
>> The sylpheed headers are installed to the target directory,
>> creating full staging directory path in the target rootfs,
>> which is wrong.
>> This happens because the headers are installed to
>> $(DESTDIR)$(includedir), while DESTDIR is $(TARGET_DIR)
>> and includedir is set to $(STAGING_DIR)/usr/include in the
>> SYLPHEED_CONF_OPT.
>>
>> The includedir was set to staging include because sylpheed
>> incorrectly adds includedir to its include path, and does
>> not build with the default includedir set to /usr/include
>> in the target filesystem.
>>
>> This removes includedir setting and also removes it from
>> include paths in Makefiles. The same approach is used
>> in the OE.
>>
>> Signed-off-by: Valentine Barshak<gvaxon@gmail.com>
>
> Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
>
> with a small addition:
>
>> ---
>> package/sylpheed/sylpheed.mk | 11 +++++++++--
>> 1 file changed, 9 insertions(+), 2 deletions(-)
>>
>> diff --git a/package/sylpheed/sylpheed.mk b/package/sylpheed/sylpheed.mk
>> index 451c4de..100fd67 100644
>> --- a/package/sylpheed/sylpheed.mk
>> +++ b/package/sylpheed/sylpheed.mk
>> @@ -9,11 +9,18 @@ SYLPHEED_VERSION =
>> $(SYLPHEED_VERSION_MAJOR).$(SYLPHEED_VERSION_MINOR)
>> SYLPHEED_SOURCE = sylpheed-$(SYLPHEED_VERSION).tar.bz2
>> SYLPHEED_SITE =
>> http://sylpheed.sraoss.jp/sylpheed/v$(SYLPHEED_VERSION_MAJOR)
>>
>> -SYLPHEED_CONF_OPT = --disable-gtkspell \
>> - --includedir=$(STAGING_DIR)/usr/include
>> +SYLPHEED_CONF_OPT = --disable-gtkspell
>>
>> SYLPHEED_DEPENDENCIES = host-pkg-config libgtk2
>>
>> +define SYLPHEED_PRECONFIGURE
>> + for i in $$(find $(@D) -name "Makefile*"); do \
>> + sed -i 's:-I$$(includedir)::g' $$i; \
>> + done
>> +endef
>
> Put a small explanatory comment here, e.g.:
>
> # Remove the -I$(includedir) from the Makefile, because it would
> # refer to the host's /usr/include.
>
>
Thanks!
I've added the comment and slightly modified the commit log.
Will send v3 in a bit.
Thanks,
Val.
> Regards,
> Arnout
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-10-07 22:39 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-10-06 18:55 [Buildroot] [PATCH v2] sylpheed: Fix includedir Valentine Barshak
2012-10-07 11:09 ` Arnout Vandecappelle
2012-10-07 22:39 ` Valentine Barshak
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.