On Fri, Mar 29, 2024 at 04:09:48PM +0800, Richard Zhu wrote:
> Add i.MX8QM and i.MX8QXP HSIO SerDes PHY binding.
> - Use the controller ID to specify which controller is binded to the
> PHY.
> - Introduce one HSIO configuration, mandatory required to set
> "PCIE_AB_SELECT" and "PHY_X1_EPCS_SEL" during the initialization.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
>  .../bindings/phy/fsl,imx8q-hsio.yaml          | 143 ++++++++++++++++++
>  1 file changed, 143 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/fsl,imx8q-hsio.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8q-hsio.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8q-hsio.yaml
> new file mode 100644
> index 000000000000..506551d4d94a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/fsl,imx8q-hsio.yaml
> @@ -0,0 +1,143 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/fsl,imx8q-hsio.yaml#

Why doesn't the filename match a compatible?

> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale i.MX8Q SoC series HSIO SERDES PHY
> +
> +maintainers:
> +  - Richard Zhu <hongxing.zhu@nxp.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - fsl,imx8qxp-serdes
> +      - fsl,imx8qm-serdes
> +  reg:
> +    minItems: 4
> +    maxItems: 4
> +
> +  "#phy-cells":
> +    const: 3
> +    description: |
> +      The first number defines the ID of the PHY contained in the HSIO macro.
> +      The second defines controller ID binded to the PHY. The third defines the
> +      HSIO configuratons refer to the different use cases. They are defined in
> +      dt-bindings/phy/phy-imx8-pcie.h
> +
> +  reg-names:
> +    items:
> +      - const: reg
> +      - const: phy
> +      - const: ctrl
> +      - const: misc
> +
> +  clocks:
> +    minItems: 5
> +    maxItems: 14
> +
> +  clock-names:
> +    minItems: 5
> +    maxItems: 14
> +
> +  fsl,refclk-pad-mode:
> +    description: |
> +      Specifies the mode of the refclk pad used. It can be UNUSED(PHY
> +      refclock is derived from SoC internal source), INPUT(PHY refclock
> +      is provided externally via the refclk pad) or OUTPUT(PHY refclock
> +      is derived from SoC internal source and provided on the refclk pad).
> +      Refer include/dt-bindings/phy/phy-imx8-pcie.h for the constants
> +      to be used.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [ 0, 1, 2 ]

Why do we need numbers and a header here at all? The enum should be an
enum of strings input, output & unused. Oh and "unused" can just be
dropped, and not having the property at all would mean "unused".

> +
> +  power-domains:
> +    description: |
> +      i.MX8Q HSIO SerDes power domains. i.MX8QXP has one SerDes power domains.
> +      And i.MX8QM has two.

The text description here can go, your constrains communicate this.

> +    minItems: 1
> +    maxItems: 2
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#phy-cells"
> +  - clocks
> +  - clock-names
> +  - fsl,refclk-pad-mode
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - fsl,imx8qxp-serdes
> +    then:
> +      properties:
> +        clock-names:
> +          items:
> +            - const: apb_pclk0
> +            - const: pclk0

Why would you have different ordering for the two devices?

> +            - const: phy0_crr
> +            - const: ctl0_crr
> +            - const: misc_crr
> +        power-domains:
> +          minItems: 1
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - fsl,imx8qm-serdes
> +    then:
> +      properties:
> +        clock-names:
> +          items:
> +            - const: pclk0
> +            - const: pclk1
> +            - const: apb_pclk0
> +            - const: apb_pclk1
> +            - const: pclk2
> +            - const: epcs_tx
> +            - const: epcs_rx
> +            - const: apb_pclk2
> +            - const: phy0_crr
> +            - const: phy1_crr
> +            - const: ctl0_crr
> +            - const: ctl1_crr
> +            - const: ctl2_crr
> +            - const: misc_crr
> +        power-domains:
> +          minItems: 2
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/imx8-clock.h>
> +    #include <dt-bindings/clock/imx8-lpcg.h>
> +    #include <dt-bindings/firmware/imx/rsrc.h>
> +    #include <dt-bindings/phy/phy-imx8-pcie.h>
> +
> +    serdes: phy@5f1a0000 {

Drop the unused label please.

> +            compatible = "fsl,imx8qxp-serdes";
> +            reg = <0x5f1a0000 0x10000>,
> +                  <0x5f120000 0x10000>,
> +                  <0x5f140000 0x10000>,
> +                  <0x5f160000 0x10000>;
> +            reg-names = "reg", "phy", "ctrl", "misc";
> +            clocks = <&phyx1_lpcg IMX_LPCG_CLK_0>,
> +                     <&phyx1_lpcg IMX_LPCG_CLK_4>,
> +                     <&phyx1_crr1_lpcg IMX_LPCG_CLK_4>,
> +                     <&pcieb_crr3_lpcg IMX_LPCG_CLK_4>,
> +                     <&misc_crr5_lpcg IMX_LPCG_CLK_4>;
> +            clock-names = "apb_pclk0", "pclk0", "phy0_crr", "ctl0_crr",
> +                          "misc_crr";
> +            power-domains = <&pd IMX_SC_R_SERDES_1>;
> +            #phy-cells = <3>;

> +            status = "disabled";

Drop this status.

Cheers,
Conor.

> +    };
> +...
> -- 
> 2.37.1
>