* [PATCH v2] ARM: dts: stm32: add heartbeat led for stm32mp157c-ed1
@ 2024-03-26 7:54 ` patrice.chotard
0 siblings, 0 replies; 4+ messages in thread
From: patrice.chotard @ 2024-03-26 7:54 UTC (permalink / raw
To: robh+dt, Krzysztof Kozlowski, alexandre.torgue
Cc: linux-stm32, linux-arm-kernel, linux-kernel, devicetree,
Patrice Chotard
From: Patrice Chotard <patrice.chotard@foss.st.com>
Add heartbeat led for stm32mp157c-ed1.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
V2 changes :
_ add color and function properties.
arch/arm/boot/dts/st/stm32mp157c-ed1.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
index 66ed5f9921ba..525d9ca7d576 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
@@ -10,6 +10,7 @@
#include "stm32mp15-pinctrl.dtsi"
#include "stm32mp15xxaa-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/mfd/st,stpmic1.h>
/ {
@@ -24,6 +25,17 @@ chosen {
stdout-path = "serial0:115200n8";
};
+ led {
+ compatible = "gpio-leds";
+ led-blue {
+ gpios = <&gpiod 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ function = LED_FUNCTION_HEARTBEAT;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+
memory@c0000000 {
device_type = "memory";
reg = <0xC0000000 0x40000000>;
--
2.25.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v2] ARM: dts: stm32: add heartbeat led for stm32mp157c-ed1
@ 2024-03-26 7:54 ` patrice.chotard
0 siblings, 0 replies; 4+ messages in thread
From: patrice.chotard @ 2024-03-26 7:54 UTC (permalink / raw
To: robh+dt, Krzysztof Kozlowski, alexandre.torgue
Cc: linux-stm32, linux-arm-kernel, linux-kernel, devicetree,
Patrice Chotard
From: Patrice Chotard <patrice.chotard@foss.st.com>
Add heartbeat led for stm32mp157c-ed1.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
V2 changes :
_ add color and function properties.
arch/arm/boot/dts/st/stm32mp157c-ed1.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
index 66ed5f9921ba..525d9ca7d576 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
@@ -10,6 +10,7 @@
#include "stm32mp15-pinctrl.dtsi"
#include "stm32mp15xxaa-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/mfd/st,stpmic1.h>
/ {
@@ -24,6 +25,17 @@ chosen {
stdout-path = "serial0:115200n8";
};
+ led {
+ compatible = "gpio-leds";
+ led-blue {
+ gpios = <&gpiod 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ function = LED_FUNCTION_HEARTBEAT;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+
memory@c0000000 {
device_type = "memory";
reg = <0xC0000000 0x40000000>;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v2] ARM: dts: stm32: add heartbeat led for stm32mp157c-ed1
2024-03-26 7:54 ` patrice.chotard
@ 2024-04-08 8:54 ` Alexandre TORGUE
-1 siblings, 0 replies; 4+ messages in thread
From: Alexandre TORGUE @ 2024-04-08 8:54 UTC (permalink / raw
To: patrice.chotard, robh+dt, Krzysztof Kozlowski
Cc: linux-stm32, linux-arm-kernel, linux-kernel, devicetree
Hi Patrice
On 3/26/24 08:54, patrice.chotard@foss.st.com wrote:
> From: Patrice Chotard <patrice.chotard@foss.st.com>
>
> Add heartbeat led for stm32mp157c-ed1.
>
> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
>
> V2 changes :
> _ add color and function properties.
>
> arch/arm/boot/dts/st/stm32mp157c-ed1.dts | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
> index 66ed5f9921ba..525d9ca7d576 100644
> --- a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
> +++ b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
> @@ -10,6 +10,7 @@
> #include "stm32mp15-pinctrl.dtsi"
> #include "stm32mp15xxaa-pinctrl.dtsi"
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> #include <dt-bindings/mfd/st,stpmic1.h>
>
> / {
> @@ -24,6 +25,17 @@ chosen {
> stdout-path = "serial0:115200n8";
> };
>
> + led {
> + compatible = "gpio-leds";
> + led-blue {
> + gpios = <&gpiod 9 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + default-state = "off";
> + function = LED_FUNCTION_HEARTBEAT;
> + color = <LED_COLOR_ID_BLUE>;
> + };
> + };
> +
> memory@c0000000 {
> device_type = "memory";
> reg = <0xC0000000 0x40000000>;
Applied on stm32-next.
thanks
Alex
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] ARM: dts: stm32: add heartbeat led for stm32mp157c-ed1
@ 2024-04-08 8:54 ` Alexandre TORGUE
0 siblings, 0 replies; 4+ messages in thread
From: Alexandre TORGUE @ 2024-04-08 8:54 UTC (permalink / raw
To: patrice.chotard, robh+dt, Krzysztof Kozlowski
Cc: linux-stm32, linux-arm-kernel, linux-kernel, devicetree
Hi Patrice
On 3/26/24 08:54, patrice.chotard@foss.st.com wrote:
> From: Patrice Chotard <patrice.chotard@foss.st.com>
>
> Add heartbeat led for stm32mp157c-ed1.
>
> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
>
> V2 changes :
> _ add color and function properties.
>
> arch/arm/boot/dts/st/stm32mp157c-ed1.dts | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
> index 66ed5f9921ba..525d9ca7d576 100644
> --- a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
> +++ b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
> @@ -10,6 +10,7 @@
> #include "stm32mp15-pinctrl.dtsi"
> #include "stm32mp15xxaa-pinctrl.dtsi"
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> #include <dt-bindings/mfd/st,stpmic1.h>
>
> / {
> @@ -24,6 +25,17 @@ chosen {
> stdout-path = "serial0:115200n8";
> };
>
> + led {
> + compatible = "gpio-leds";
> + led-blue {
> + gpios = <&gpiod 9 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + default-state = "off";
> + function = LED_FUNCTION_HEARTBEAT;
> + color = <LED_COLOR_ID_BLUE>;
> + };
> + };
> +
> memory@c0000000 {
> device_type = "memory";
> reg = <0xC0000000 0x40000000>;
Applied on stm32-next.
thanks
Alex
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2024-04-08 8:55 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-03-26 7:54 [PATCH v2] ARM: dts: stm32: add heartbeat led for stm32mp157c-ed1 patrice.chotard
2024-03-26 7:54 ` patrice.chotard
2024-04-08 8:54 ` Alexandre TORGUE
2024-04-08 8:54 ` Alexandre TORGUE
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.