From: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
To: <ath12k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>,
Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>,
Avula Sri Charan <quic_asrichar@quicinc.com>
Subject: [PATCH 4/6] wifi: ath12k: add 6 GHz params in peer assoc command
Date: Mon, 25 Mar 2024 14:23:02 -0700 [thread overview]
Message-ID: <20240325212304.28241-5-quic_pradeepc@quicinc.com> (raw)
In-Reply-To: <20240325212304.28241-1-quic_pradeepc@quicinc.com>
Currently A-MPDU aggregation parameters are not being configured
during peer association for 6 GHz band. Hence, extract these
parameters from station's capabilities received in association
request and send to firmware. Without this, A-MPDU aggregation
is not happening in 6 GHz band.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Co-developed-by: Avula Sri Charan <quic_asrichar@quicinc.com>
Signed-off-by: Avula Sri Charan <quic_asrichar@quicinc.com>
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
---
drivers/net/wireless/ath/ath12k/mac.c | 56 ++++++++++++++++++++++++++-
1 file changed, 55 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 6d7df18ec424..7e296140439a 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -1910,6 +1910,59 @@ static void ath12k_peer_assoc_h_he(struct ath12k *ar,
}
}
+static void ath12k_peer_assoc_h_he_6ghz(struct ath12k *ar,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct ath12k_wmi_peer_assoc_arg *arg)
+{
+ const struct ieee80211_sta_he_cap *he_cap = &sta->deflink.he_cap;
+ struct cfg80211_chan_def def;
+ enum nl80211_band band;
+ u8 ampdu_factor;
+
+ if (WARN_ON(ath12k_mac_vif_chan(vif, &def)))
+ return;
+
+ band = def.chan->band;
+
+ if (!arg->he_flag || band != NL80211_BAND_6GHZ || !sta->deflink.he_6ghz_capa.capa)
+ return;
+
+ if (sta->deflink.bandwidth == IEEE80211_STA_RX_BW_40)
+ arg->bw_40 = true;
+
+ if (sta->deflink.bandwidth == IEEE80211_STA_RX_BW_80)
+ arg->bw_80 = true;
+
+ if (sta->deflink.bandwidth == IEEE80211_STA_RX_BW_160)
+ arg->bw_160 = true;
+
+ if (sta->deflink.bandwidth == IEEE80211_STA_RX_BW_320)
+ arg->bw_320 = true;
+
+ arg->peer_he_caps_6ghz = le16_to_cpu(sta->deflink.he_6ghz_capa.capa);
+ arg->peer_mpdu_density =
+ ath12k_parse_mpdudensity(u32_get_bits(arg->peer_he_caps_6ghz,
+ IEEE80211_HE_6GHZ_CAP_MIN_MPDU_START));
+
+ /* From IEEE Std 802.11ax-2021 - Section 10.12.2: An HE STA shall be capable of
+ * receiving A-MPDU where the A-MPDU pre-EOF padding length is up to the value
+ * indicated by the Maximum A-MPDU Length Exponent Extension field in the HE
+ * Capabilities element and the Maximum A-MPDU Length Exponent field in HE 6 GHz
+ * Band Capabilities element in the 6 GHz band.
+ *
+ * Here, we are extracting the Max A-MPDU Exponent Extension from HE caps and
+ * factor is the Maximum A-MPDU Length Exponent from HE 6 GHZ Band capability.
+ */
+ ampdu_factor = u8_get_bits(he_cap->he_cap_elem.mac_cap_info[3],
+ IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_MASK) +
+ u32_get_bits(arg->peer_he_caps_6ghz,
+ IEEE80211_HE_6GHZ_CAP_MAX_AMPDU_LEN_EXP);
+
+ arg->peer_max_mpdu = (1u << (IEEE80211_HE_6GHZ_MAX_AMPDU_FACTOR +
+ ampdu_factor)) - 1;
+}
+
static void ath12k_peer_assoc_h_smps(struct ieee80211_sta *sta,
struct ath12k_wmi_peer_assoc_arg *arg)
{
@@ -2382,6 +2435,7 @@ static void ath12k_peer_assoc_prepare(struct ath12k *ar,
ath12k_peer_assoc_h_ht(ar, vif, sta, arg);
ath12k_peer_assoc_h_vht(ar, vif, sta, arg);
ath12k_peer_assoc_h_he(ar, vif, sta, arg);
+ ath12k_peer_assoc_h_he_6ghz(ar, vif, sta, arg);
ath12k_peer_assoc_h_eht(ar, vif, sta, arg);
ath12k_peer_assoc_h_qos(ar, vif, sta, arg);
ath12k_peer_assoc_h_phymode(ar, vif, sta, arg);
@@ -8029,7 +8083,7 @@ static int ath12k_mac_hw_register(struct ath12k_hw *ah)
ieee80211_hw_set(hw, SUPPORTS_TX_FRAG);
ieee80211_hw_set(hw, REPORTS_LOW_ACK);
- if (ht_cap & WMI_HT_CAP_ENABLED) {
+ if ((ht_cap & WMI_HT_CAP_ENABLED) || ar->supports_6ghz) {
ieee80211_hw_set(hw, AMPDU_AGGREGATION);
ieee80211_hw_set(hw, TX_AMPDU_SETUP_IN_HW);
ieee80211_hw_set(hw, SUPPORTS_REORDERING_BUFFER);
--
2.17.1
next prev parent reply other threads:[~2024-03-25 21:23 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-25 21:22 [PATCH 0/6] bug fixes and enhancements to 6 GHz band support Pradeep Kumar Chitrapu
2024-03-25 21:22 ` [PATCH 1/6] wifi: ath12k: add channel 2 into 6 GHz channel list Pradeep Kumar Chitrapu
2024-03-25 21:23 ` [PATCH 2/6] wifi: ath12k: Correct 6 GHz frequency value in rx status Pradeep Kumar Chitrapu
2024-03-25 21:23 ` [PATCH 3/6] wifi: ath12k: fix survey dump collection in 6 GHz Pradeep Kumar Chitrapu
2024-03-25 21:23 ` Pradeep Kumar Chitrapu [this message]
2024-03-29 17:48 ` [PATCH 4/6] wifi: ath12k: add 6 GHz params in peer assoc command Jeff Johnson
2024-03-25 21:23 ` [PATCH 5/6] wifi: ath12k: refactor smps configuration Pradeep Kumar Chitrapu
2024-03-25 21:23 ` [PATCH 6/6] wifi: ath12k: support SMPS configuration for 6 GHz Pradeep Kumar Chitrapu
2024-03-26 3:38 ` Baochen Qiang
2024-03-26 17:37 ` Pradeep Kumar Chitrapu
2024-03-29 17:54 ` Jeff Johnson
2024-03-26 15:23 ` [PATCH 0/6] bug fixes and enhancements to 6 GHz band support Kalle Valo
2024-03-26 17:38 ` Pradeep Kumar Chitrapu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240325212304.28241-5-quic_pradeepc@quicinc.com \
--to=quic_pradeepc@quicinc.com \
--cc=ath12k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=quic_asrichar@quicinc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.