From: Petr Tesarik <petrtesarik@huaweicloud.com>
To: Christoph Hellwig <hch@lst.de>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Robin Murphy <robin.murphy@arm.com>,
Petr Tesarik <petr.tesarik1@huawei-partners.com>,
Michael Kelley <mhklinux@outlook.com>,
Will Deacon <will@kernel.org>,
linux-kernel@vger.kernel.org (open list),
iommu@lists.linux.dev (open list:DMA MAPPING HELPERS)
Cc: Roberto Sassu <roberto.sassu@huaweicloud.com>,
Petr Tesarik <petr@tesarici.cz>
Subject: [PATCH v3 1/2] swiotlb: extend buffer pre-padding to alloc_align_mask if necessary
Date: Thu, 21 Mar 2024 18:19:01 +0100 [thread overview]
Message-ID: <20240321171902.85-2-petrtesarik@huaweicloud.com> (raw)
In-Reply-To: <20240321171902.85-1-petrtesarik@huaweicloud.com>
From: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Allow a buffer pre-padding of up to alloc_align_mask. If the allocation
alignment is bigger than IO_TLB_SIZE and min_align_mask covers any non-zero
bits in the original address between IO_TLB_SIZE and alloc_align_mask,
these bits are not preserved in the swiotlb buffer address.
To fix this case, increase the allocation size and use a larger offset
within the allocated buffer. As a result, extra padding slots may be
allocated before the mapping start address.
Leave orig_addr in these padding slots initialized to INVALID_PHYS_ADDR.
These slots do not correspond to any CPU buffer, so attempts to sync the
data should be ignored.
The padding slots should be automatically released when the buffer is
unmapped. However, swiotlb_tbl_unmap_single() takes only the address of the
DMA buffer slot, not the first padding slot. Save the number of padding
slots in struct io_tlb_slot and use it to adjust the slot index in
swiotlb_release_slots(), so all allocated slots are properly freed.
Fixes: 2fd4fa5d3fb5 ("swiotlb: Fix alignment checks when both allocation and DMA masks are present")
Link: https://lore.kernel.org/linux-iommu/20240311210507.217daf8b@meshulam.tesarici.cz/
Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
---
kernel/dma/swiotlb.c | 35 +++++++++++++++++++++++++++++------
1 file changed, 29 insertions(+), 6 deletions(-)
diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c
index 86fe172b5958..3779a48eec9b 100644
--- a/kernel/dma/swiotlb.c
+++ b/kernel/dma/swiotlb.c
@@ -69,11 +69,14 @@
* @alloc_size: Size of the allocated buffer.
* @list: The free list describing the number of free entries available
* from each index.
+ * @pad_slots: Number of preceding padding slots. Valid only in the first
+ * allocated non-padding slot.
*/
struct io_tlb_slot {
phys_addr_t orig_addr;
size_t alloc_size;
- unsigned int list;
+ unsigned short list;
+ unsigned short pad_slots;
};
static bool swiotlb_force_bounce;
@@ -287,6 +290,7 @@ static void swiotlb_init_io_tlb_pool(struct io_tlb_pool *mem, phys_addr_t start,
mem->nslabs - i);
mem->slots[i].orig_addr = INVALID_PHYS_ADDR;
mem->slots[i].alloc_size = 0;
+ mem->slots[i].pad_slots = 0;
}
memset(vaddr, 0, bytes);
@@ -1328,11 +1332,12 @@ phys_addr_t swiotlb_tbl_map_single(struct device *dev, phys_addr_t orig_addr,
unsigned long attrs)
{
struct io_tlb_mem *mem = dev->dma_io_tlb_mem;
- unsigned int offset = swiotlb_align_offset(dev, orig_addr);
+ unsigned int offset;
struct io_tlb_pool *pool;
unsigned int i;
int index;
phys_addr_t tlb_addr;
+ unsigned short pad_slots;
if (!mem || !mem->nslabs) {
dev_warn_ratelimited(dev,
@@ -1349,6 +1354,15 @@ phys_addr_t swiotlb_tbl_map_single(struct device *dev, phys_addr_t orig_addr,
return (phys_addr_t)DMA_MAPPING_ERROR;
}
+ /*
+ * Calculate buffer pre-padding within the allocated space. Use it to
+ * preserve the low bits of the original address according to device's
+ * min_align_mask. Limit the padding to alloc_align_mask or slot size
+ * (whichever is bigger); higher bits of the original address are
+ * preserved by selecting a suitable IO TLB slot.
+ */
+ offset = orig_addr & dma_get_min_align_mask(dev) &
+ (alloc_align_mask | (IO_TLB_SIZE - 1));
index = swiotlb_find_slots(dev, orig_addr,
alloc_size + offset, alloc_align_mask, &pool);
if (index == -1) {
@@ -1364,6 +1378,10 @@ phys_addr_t swiotlb_tbl_map_single(struct device *dev, phys_addr_t orig_addr,
* This is needed when we sync the memory. Then we sync the buffer if
* needed.
*/
+ pad_slots = offset / IO_TLB_SIZE;
+ offset %= IO_TLB_SIZE;
+ index += pad_slots;
+ pool->slots[index].pad_slots = pad_slots;
for (i = 0; i < nr_slots(alloc_size + offset); i++)
pool->slots[index + i].orig_addr = slot_addr(orig_addr, i);
tlb_addr = slot_addr(pool->start, index) + offset;
@@ -1385,12 +1403,16 @@ static void swiotlb_release_slots(struct device *dev, phys_addr_t tlb_addr)
struct io_tlb_pool *mem = swiotlb_find_pool(dev, tlb_addr);
unsigned long flags;
unsigned int offset = swiotlb_align_offset(dev, tlb_addr);
- int index = (tlb_addr - offset - mem->start) >> IO_TLB_SHIFT;
- int nslots = nr_slots(mem->slots[index].alloc_size + offset);
- int aindex = index / mem->area_nslabs;
- struct io_tlb_area *area = &mem->areas[aindex];
+ int index, nslots, aindex;
+ struct io_tlb_area *area;
int count, i;
+ index = (tlb_addr - offset - mem->start) >> IO_TLB_SHIFT;
+ index -= mem->slots[index].pad_slots;
+ nslots = nr_slots(mem->slots[index].alloc_size + offset);
+ aindex = index / mem->area_nslabs;
+ area = &mem->areas[aindex];
+
/*
* Return the buffer to the free list by setting the corresponding
* entries to indicate the number of contiguous entries available.
@@ -1413,6 +1435,7 @@ static void swiotlb_release_slots(struct device *dev, phys_addr_t tlb_addr)
mem->slots[i].list = ++count;
mem->slots[i].orig_addr = INVALID_PHYS_ADDR;
mem->slots[i].alloc_size = 0;
+ mem->slots[i].pad_slots = 0;
}
/*
--
2.34.1
next prev parent reply other threads:[~2024-03-21 17:19 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-21 17:19 [PATCH v3 0/2] swiotlb: allocate padding slots if necessary Petr Tesarik
2024-03-21 17:19 ` Petr Tesarik [this message]
2024-03-22 4:29 ` [PATCH v3 1/2] swiotlb: extend buffer pre-padding to alloc_align_mask " Michael Kelley
2024-03-22 10:29 ` Petr Tesarik
2024-03-21 17:19 ` [PATCH v3 2/2] bug: introduce ASSERT_VAR_CAN_HOLD() Petr Tesarik
2024-03-22 4:33 ` Michael Kelley
2024-03-22 15:37 ` Will Deacon
2024-03-22 17:33 ` Petr Tesařík
2024-03-22 15:09 ` [PATCH v3 0/2] swiotlb: allocate padding slots if necessary Will Deacon
2024-03-22 17:51 ` Petr Tesařík
2024-03-27 19:42 ` Will Deacon
2024-03-22 18:11 ` Michael Kelley
2024-03-22 19:31 ` Petr Tesařík
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240321171902.85-2-petrtesarik@huaweicloud.com \
--to=petrtesarik@huaweicloud.com \
--cc=hch@lst.de \
--cc=iommu@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mhklinux@outlook.com \
--cc=petr.tesarik1@huawei-partners.com \
--cc=petr@tesarici.cz \
--cc=roberto.sassu@huaweicloud.com \
--cc=robin.murphy@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.