From: Phillip Potter <phil@philpotter.co.uk>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, straube.linux@gmail.com,
kaixuxia@tencent.com, linux-staging@lists.linux.dev,
linux-kernel@vger.kernel.org, liushixin2@huawei.com,
unixbhaskar@gmail.com, gustavoars@kernel.org, martin@kaiser.cx,
bkkarthik@pesu.pes.edu, dan.carpenter@oracle.com
Subject: [PATCH 1/6] staging: rtl8188eu: remove ODM_RT_TRACE calls from hal/phy.c
Date: Fri, 11 Jun 2021 01:24:59 +0100 [thread overview]
Message-ID: <20210611002504.166405-2-phil@philpotter.co.uk> (raw)
In-Reply-To: <20210611002504.166405-1-phil@philpotter.co.uk>
Remove all ODM_RT_TRACE calls from hal/phy.c, as this debug code
is not optimal and doesn't follow best practices. This in concert
with other removals allows for the removal of include/odm_debug.h
in its entirety.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
---
drivers/staging/rtl8188eu/hal/phy.c | 36 +----------------------------
1 file changed, 1 insertion(+), 35 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/phy.c b/drivers/staging/rtl8188eu/hal/phy.c
index a664bff370bb..34079275e57c 100644
--- a/drivers/staging/rtl8188eu/hal/phy.c
+++ b/drivers/staging/rtl8188eu/hal/phy.c
@@ -303,10 +303,6 @@ void rtl88eu_dm_txpower_track_adjust(struct odm_dm_struct *dm_odm, u8 type,
u8 pwr_value = 0;
/* Tx power tracking BB swing table. */
if (type == 0) { /* For OFDM adjust */
- ODM_RT_TRACE(dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
- ("BbSwingIdxOfdm = %d BbSwingFlagOfdm=%d\n",
- dm_odm->BbSwingIdxOfdm, dm_odm->BbSwingFlagOfdm));
-
if (dm_odm->BbSwingIdxOfdm <= dm_odm->BbSwingIdxOfdmBase) {
*direction = 1;
pwr_value = dm_odm->BbSwingIdxOfdmBase -
@@ -316,12 +312,7 @@ void rtl88eu_dm_txpower_track_adjust(struct odm_dm_struct *dm_odm, u8 type,
pwr_value = dm_odm->BbSwingIdxOfdm -
dm_odm->BbSwingIdxOfdmBase;
}
-
} else if (type == 1) { /* For CCK adjust. */
- ODM_RT_TRACE(dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
- ("dm_odm->BbSwingIdxCck = %d dm_odm->BbSwingIdxCckBase = %d\n",
- dm_odm->BbSwingIdxCck, dm_odm->BbSwingIdxCckBase));
-
if (dm_odm->BbSwingIdxCck <= dm_odm->BbSwingIdxCckBase) {
*direction = 1;
pwr_value = dm_odm->BbSwingIdxCckBase -
@@ -343,8 +334,6 @@ void rtl88eu_dm_txpower_track_adjust(struct odm_dm_struct *dm_odm, u8 type,
static void dm_txpwr_track_setpwr(struct odm_dm_struct *dm_odm)
{
if (dm_odm->BbSwingFlagOfdm || dm_odm->BbSwingFlagCck) {
- ODM_RT_TRACE(dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
- ("%s CH=%d\n", __func__, *dm_odm->pChannel));
phy_set_tx_power_level(dm_odm->Adapter, *dm_odm->pChannel);
dm_odm->BbSwingFlagOfdm = false;
dm_odm->BbSwingFlagCck = false;
@@ -610,8 +599,6 @@ static u8 phy_path_a_rx_iqk(struct adapter *adapt, bool configPathB)
/* 1 RX IQK */
/* modify RXIQK mode table */
- ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD,
- ("Path-A Rx IQK modify RXIQK mode table 2!\n"));
phy_set_bb_reg(adapt, rFPGA0_IQK, bMaskDWord, 0x00000000);
phy_set_rf_reg(adapt, RF_PATH_A, RF_WE_LUT, bRFRegOffsetMask, 0x800a0);
phy_set_rf_reg(adapt, RF_PATH_A, RF_RCK_OS, bRFRegOffsetMask, 0x30000);
@@ -650,9 +637,6 @@ static u8 phy_path_a_rx_iqk(struct adapter *adapt, bool configPathB)
(((reg_ea4 & 0x03FF0000) >> 16) != 0x132) &&
(((reg_eac & 0x03FF0000) >> 16) != 0x36))
result |= 0x02;
- else
- ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD,
- ("Path A Rx IQK fail!!\n"));
return result;
}
@@ -686,9 +670,7 @@ static u8 phy_path_b_iqk(struct adapter *adapt)
(((regec4 & 0x03FF0000) >> 16) != 0x132) &&
(((regecc & 0x03FF0000) >> 16) != 0x36))
result |= 0x02;
- else
- ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION,
- ODM_DBG_LOUD, ("Path B Rx IQK fail!!\n"));
+
return result;
}
@@ -1055,13 +1037,6 @@ static void phy_iq_calibrate(struct adapter *adapt, s32 result[][8],
bMaskDWord) & 0x3FF0000) >> 16;
break;
}
- ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD,
- ("Path A Rx IQK Fail!!\n"));
- }
-
- if (path_a_ok == 0x00) {
- ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD,
- ("Path A IQK failed!!\n"));
}
if (is2t) {
@@ -1089,11 +1064,6 @@ static void phy_iq_calibrate(struct adapter *adapt, s32 result[][8],
bMaskDWord) & 0x3FF0000) >> 16;
}
}
-
- if (path_b_ok == 0x00) {
- ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD,
- ("Path B IQK failed!!\n"));
- }
}
/* Back to BB mode, load original value */
@@ -1214,8 +1184,6 @@ void rtl88eu_phy_iq_calibrate(struct adapter *adapt, bool recovery)
return;
if (recovery) {
- ODM_RT_TRACE(dm_odm, ODM_COMP_INIT, ODM_DBG_LOUD,
- ("phy_iq_calibrate: Return due to recovery!\n"));
reload_adda_reg(adapt, iqk_bb_reg_92c,
dm_odm->RFCalibrateInfo.IQK_BB_backup_recover, 9);
return;
@@ -1280,8 +1248,6 @@ void rtl88eu_phy_iq_calibrate(struct adapter *adapt, bool recovery)
pathaok = true;
pathbok = true;
} else {
- ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD,
- ("IQK: FAIL use default value\n"));
dm_odm->RFCalibrateInfo.RegE94 = 0x100;
dm_odm->RFCalibrateInfo.RegEB4 = 0x100;
dm_odm->RFCalibrateInfo.RegE9C = 0x0;
--
2.30.2
next prev parent reply other threads:[~2021-06-11 0:25 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-11 0:24 [PATCH 0/6] staging: rtl8188eu: remove hal/odm_debug.h Phillip Potter
2021-06-11 0:24 ` Phillip Potter [this message]
2021-06-11 0:25 ` [PATCH 2/6] staging: rtl8188eu: remove ODM_RT_TRACE calls from hal/hal8188e_rate_adaptive.c Phillip Potter
2021-06-11 0:25 ` [PATCH 3/6] staging: rtl8188eu: remove ODM_RT_TRACE calls from hal/odm_rtl8188e.c Phillip Potter
2021-06-11 0:25 ` [PATCH 4/6] staging: rtl8188eu: remove ODM_RT_TRACE calls from hal/odm.c Phillip Potter
2021-06-11 0:25 ` [PATCH 5/6] staging: rtl8188eu: remove DebugComponents/DebugLevel from odm_dm_struct Phillip Potter
2021-06-11 0:25 ` [PATCH 6/6] staging: rtl8188eu: remove include/odm_debug.h Phillip Potter
2021-06-11 9:08 ` [PATCH 5/6] staging: rtl8188eu: remove DebugComponents/DebugLevel from odm_dm_struct Dan Carpenter
2021-06-12 17:37 ` Phillip Potter
2021-06-11 9:10 ` [PATCH 0/6] staging: rtl8188eu: remove hal/odm_debug.h Dan Carpenter
2021-06-11 15:35 ` Martin Kaiser
2021-06-12 17:38 ` Phillip Potter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210611002504.166405-2-phil@philpotter.co.uk \
--to=phil@philpotter.co.uk \
--cc=Larry.Finger@lwfinger.net \
--cc=bkkarthik@pesu.pes.edu \
--cc=dan.carpenter@oracle.com \
--cc=gregkh@linuxfoundation.org \
--cc=gustavoars@kernel.org \
--cc=kaixuxia@tencent.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=liushixin2@huawei.com \
--cc=martin@kaiser.cx \
--cc=straube.linux@gmail.com \
--cc=unixbhaskar@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.