From: Sean Christopherson <seanjc@google.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
syzbot+fb0b6a7e8713aeb0319c@syzkaller.appspotmail.com
Subject: [PATCH 1/9] KVM: x86: Immediately reset the MMU context when the SMM flag is cleared
Date: Wed, 9 Jun 2021 11:56:11 -0700 [thread overview]
Message-ID: <20210609185619.992058-2-seanjc@google.com> (raw)
In-Reply-To: <20210609185619.992058-1-seanjc@google.com>
Immediately reset the MMU context when the vCPU's SMM flag is cleared so
that the SMM flag in the MMU role is always synchronized with the vCPU's
flag. If RSM fails (which isn't correctly emulated), KVM will bail
without calling post_leave_smm() and leave the MMU in a bad state.
The bad MMU role can lead to a NULL pointer dereference when grabbing a
shadow page's rmap for a page fault as the initial lookups for the gfn
will happen with the vCPU's SMM flag (=0), whereas the rmap lookup will
use the shadow page's SMM flag, which comes from the MMU (=1). SMM has
an entirely different set of memslots, and so the initial lookup can find
a memslot (SMM=0) and then explode on the rmap memslot lookup (SMM=1).
general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 PID: 8410 Comm: syz-executor382 Not tainted 5.13.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__gfn_to_rmap arch/x86/kvm/mmu/mmu.c:935 [inline]
RIP: 0010:gfn_to_rmap+0x2b0/0x4d0 arch/x86/kvm/mmu/mmu.c:947
Code: <42> 80 3c 20 00 74 08 4c 89 ff e8 f1 79 a9 00 4c 89 fb 4d 8b 37 44
RSP: 0018:ffffc90000ffef98 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888015b9f414 RCX: ffff888019669c40
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001
RBP: 0000000000000001 R08: ffffffff811d9cdb R09: ffffed10065a6002
R10: ffffed10065a6002 R11: 0000000000000000 R12: dffffc0000000000
R13: 0000000000000003 R14: 0000000000000001 R15: 0000000000000000
FS: 000000000124b300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000028e31000 CR4: 00000000001526e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
rmap_add arch/x86/kvm/mmu/mmu.c:965 [inline]
mmu_set_spte+0x862/0xe60 arch/x86/kvm/mmu/mmu.c:2604
__direct_map arch/x86/kvm/mmu/mmu.c:2862 [inline]
direct_page_fault+0x1f74/0x2b70 arch/x86/kvm/mmu/mmu.c:3769
kvm_mmu_do_page_fault arch/x86/kvm/mmu.h:124 [inline]
kvm_mmu_page_fault+0x199/0x1440 arch/x86/kvm/mmu/mmu.c:5065
vmx_handle_exit+0x26/0x160 arch/x86/kvm/vmx/vmx.c:6122
vcpu_enter_guest+0x3bdd/0x9630 arch/x86/kvm/x86.c:9428
vcpu_run+0x416/0xc20 arch/x86/kvm/x86.c:9494
kvm_arch_vcpu_ioctl_run+0x4e8/0xa40 arch/x86/kvm/x86.c:9722
kvm_vcpu_ioctl+0x70f/0xbb0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3460
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:1069 [inline]
__se_sys_ioctl+0xfb/0x170 fs/ioctl.c:1055
do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x440ce9
Reported-by: syzbot+fb0b6a7e8713aeb0319c@syzkaller.appspotmail.com
Fixes: 9ec19493fb86 ("KVM: x86: clear SMM flags before loading state while leaving SMM")
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
arch/x86/kvm/x86.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 9dd23bdfc6cc..54d212fe9b15 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7106,7 +7106,10 @@ static unsigned emulator_get_hflags(struct x86_emulate_ctxt *ctxt)
static void emulator_set_hflags(struct x86_emulate_ctxt *ctxt, unsigned emul_flags)
{
- emul_to_vcpu(ctxt)->arch.hflags = emul_flags;
+ struct kvm_vcpu *vcpu = emul_to_vcpu(ctxt);
+
+ vcpu->arch.hflags = emul_flags;
+ kvm_mmu_reset_context(vcpu);
}
static int emulator_pre_leave_smm(struct x86_emulate_ctxt *ctxt,
--
2.32.0.rc1.229.g3e70b5a671-goog
next prev parent reply other threads:[~2021-06-09 18:57 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-09 18:56 [PATCH 0/9] KVM: x86: Fix NULL pointer #GP due to RSM bug Sean Christopherson
2021-06-09 18:56 ` Sean Christopherson [this message]
2021-06-10 13:19 ` [PATCH 1/9] KVM: x86: Immediately reset the MMU context when the SMM flag is cleared Paolo Bonzini
2021-06-09 18:56 ` [PATCH 2/9] KVM: x86: Emulate triple fault shutdown if RSM emulation fails Sean Christopherson
2021-06-10 8:26 ` Vitaly Kuznetsov
2021-06-10 13:29 ` Paolo Bonzini
2021-06-10 15:28 ` Sean Christopherson
2021-06-10 15:30 ` Sean Christopherson
2021-06-11 11:42 ` Vitaly Kuznetsov
2021-06-10 13:23 ` Paolo Bonzini
2021-06-09 18:56 ` [PATCH 3/9] KVM: x86: Replace .set_hflags() with dedicated .exiting_smm() helper Sean Christopherson
2021-06-09 18:56 ` [PATCH 4/9] KVM: x86: Invoke kvm_smm_changed() immediately after clearing SMM flag Sean Christopherson
2021-06-09 18:56 ` [PATCH 5/9] KVM: x86: Move (most) SMM hflags modifications into kvm_smm_changed() Sean Christopherson
2021-06-09 18:56 ` [PATCH 6/9] KVM: x86: Move "entering SMM" tracepoint " Sean Christopherson
2021-06-09 18:56 ` [PATCH 7/9] KVM: x86: Rename SMM tracepoint to make it reflect reality Sean Christopherson
2021-06-09 18:56 ` [PATCH 8/9] KVM: x86: Drop .post_leave_smm(), i.e. the manual post-RSM MMU reset Sean Christopherson
2021-06-09 18:56 ` [PATCH 9/9] KVM: x86: Drop "pre_" from enter/leave_smm() helpers Sean Christopherson
2021-06-10 13:28 ` [PATCH 0/9] KVM: x86: Fix NULL pointer #GP due to RSM bug Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210609185619.992058-2-seanjc@google.com \
--to=seanjc@google.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=syzbot+fb0b6a7e8713aeb0319c@syzkaller.appspotmail.com \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.