* Git tree updated to v2.6.29-rc1, omap-2.6.28 branch added
@ 2009-01-15 15:43 Tony Lindgren
2009-01-15 18:21 ` David Brownell
2009-01-15 22:01 ` David Brownell
0 siblings, 2 replies; 8+ messages in thread
From: Tony Lindgren @ 2009-01-15 15:43 UTC (permalink / raw
To: linux-omap
Hi all,
I've updated our git tree to v2.6.29-rc1, and will start cleaning up
code in it by resetting what can be reset to be the same as in the
mainline tree.
This means that everybody please resend the stuff you want back as
patches against the mainline tree! Most likely the stuff I'm removing
will require a bit of clean-up work. But cleaning it all up is just
way too much work for one person to do, so we take the distributed
approach :)
I've also added a new branch omap-2.6.28 where we can add few bug
fixes until we can tag v2.6.28-omap2.
Regards,
Tony
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Git tree updated to v2.6.29-rc1, omap-2.6.28 branch added
2009-01-15 15:43 Git tree updated to v2.6.29-rc1, omap-2.6.28 branch added Tony Lindgren
@ 2009-01-15 18:21 ` David Brownell
2009-01-15 22:01 ` David Brownell
1 sibling, 0 replies; 8+ messages in thread
From: David Brownell @ 2009-01-15 18:21 UTC (permalink / raw
To: Tony Lindgren; +Cc: linux-omap
On Thursday 15 January 2009, Tony Lindgren wrote:
> I've updated our git tree to v2.6.29-rc1,
CC arch/arm/mach-omap2/usb-musb.o
arch/arm/mach-omap2/usb-musb.c:47: error: 'INT_243X_HS_USB_MC' undeclared here (not in a function)
arch/arm/mach-omap2/usb-musb.c:51: error: 'INT_243X_HS_USB_DMA' undeclared here (not in a function)
make[1]: *** [arch/arm/mach-omap2/usb-musb.o] Error 1
... just FYI. I won't have time to sort that out for a few
hours yet, so if someone else has a patch that'd be good.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Git tree updated to v2.6.29-rc1, omap-2.6.28 branch added
2009-01-15 15:43 Git tree updated to v2.6.29-rc1, omap-2.6.28 branch added Tony Lindgren
2009-01-15 18:21 ` David Brownell
@ 2009-01-15 22:01 ` David Brownell
2009-01-16 7:44 ` Tony Lindgren
1 sibling, 1 reply; 8+ messages in thread
From: David Brownell @ 2009-01-15 22:01 UTC (permalink / raw
To: linux-omap
On Thursday 15 January 2009, Tony Lindgren wrote:
> I've updated our git tree to v2.6.29-rc1,
OK, after adding the IRQ patch from Anand, and the appended
USB patch (from before the 2.6.29 merge window), it builds.
Then when it tries to boot, (a) the HSMMC driver reports
"error -110" then chokes, so no root FS; and then (b) MUSB
misdetects the high speed hub as full speed then chokes,
so no network links either. I'm not thinking (a) relates
to the "can't get debounce clock" message, I saw that on
earlier code that still booted just fine.
That's on a trusty Beagle config. I don't think I'll be
upgrading anything else just yet...
- Dave
============= CUT HERE
Subject: drivers/usb/core/hub.c: fix CONFIG_USB_OTG=y build
From: David Brownell <dbrownell@users.sourceforge.net>
Carry out the PM-routine interface change in the USB OTG pathway. This
was omitted from the earlier interface-change patch by mistake.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg KH <greg@kroah.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/usb/core/hub.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff -puN drivers/usb/core/hub.c~drivers-usb-core-hubc-fix-config_usb_otg=y-build drivers/usb/core/hub.c
--- a/drivers/usb/core/hub.c~drivers-usb-core-hubc-fix-config_usb_otg=y-build
+++ a/drivers/usb/core/hub.c
@@ -1554,7 +1554,7 @@ static int usb_configure_device_otg(stru
* (Includes HNP test device.)
*/
if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
- err = usb_port_suspend(udev);
+ err = usb_port_suspend(udev, PMSG_SUSPEND);
if (err < 0)
dev_dbg(&udev->dev, "HNP fail, %d\n", err);
}
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Git tree updated to v2.6.29-rc1, omap-2.6.28 branch added
2009-01-15 22:01 ` David Brownell
@ 2009-01-16 7:44 ` Tony Lindgren
2009-01-16 7:59 ` David Brownell
0 siblings, 1 reply; 8+ messages in thread
From: Tony Lindgren @ 2009-01-16 7:44 UTC (permalink / raw
To: David Brownell; +Cc: linux-omap
* David Brownell <david-b@pacbell.net> [090116 00:03]:
> On Thursday 15 January 2009, Tony Lindgren wrote:
> > I've updated our git tree to v2.6.29-rc1,
>
> OK, after adding the IRQ patch from Anand, and the appended
> USB patch (from before the 2.6.29 merge window), it builds.
>
> Then when it tries to boot, (a) the HSMMC driver reports
> "error -110" then chokes, so no root FS; and then (b) MUSB
> misdetects the high speed hub as full speed then chokes,
> so no network links either. I'm not thinking (a) relates
> to the "can't get debounce clock" message, I saw that on
> earlier code that still booted just fine.
Thanks, applied and pushed to l-o tree.
> That's on a trusty Beagle config. I don't think I'll be
> upgrading anything else just yet...
Hmm, that sounds conservative! :)
Tony
>
> - Dave
>
>
> ============= CUT HERE
> Subject: drivers/usb/core/hub.c: fix CONFIG_USB_OTG=y build
> From: David Brownell <dbrownell@users.sourceforge.net>
>
> Carry out the PM-routine interface change in the USB OTG pathway. This
> was omitted from the earlier interface-change patch by mistake.
>
> Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
> Cc: Greg KH <greg@kroah.com>
> Cc: Russell King <rmk@arm.linux.org.uk>
> Cc: Felipe Balbi <felipe.balbi@nokia.com>
> Cc: Tony Lindgren <tony@atomide.com>
> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
> ---
>
> drivers/usb/core/hub.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff -puN drivers/usb/core/hub.c~drivers-usb-core-hubc-fix-config_usb_otg=y-build drivers/usb/core/hub.c
> --- a/drivers/usb/core/hub.c~drivers-usb-core-hubc-fix-config_usb_otg=y-build
> +++ a/drivers/usb/core/hub.c
> @@ -1554,7 +1554,7 @@ static int usb_configure_device_otg(stru
> * (Includes HNP test device.)
> */
> if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
> - err = usb_port_suspend(udev);
> + err = usb_port_suspend(udev, PMSG_SUSPEND);
> if (err < 0)
> dev_dbg(&udev->dev, "HNP fail, %d\n", err);
> }
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Git tree updated to v2.6.29-rc1, omap-2.6.28 branch added
2009-01-16 7:44 ` Tony Lindgren
@ 2009-01-16 7:59 ` David Brownell
2009-01-16 8:12 ` Tony Lindgren
0 siblings, 1 reply; 8+ messages in thread
From: David Brownell @ 2009-01-16 7:59 UTC (permalink / raw
To: Tony Lindgren; +Cc: linux-omap
On Thursday 15 January 2009, Tony Lindgren wrote:
>
> > Then when it tries to boot, (a) the HSMMC driver reports
> > "error -110" then chokes, so no root FS; and then (b) MUSB
> > misdetects the high speed hub as full speed then chokes,
> > so no network links either. ....
>
> > That's on a trusty Beagle config. I don't think I'll be
> > upgrading anything else just yet...
>
> Hmm, that sounds conservative! :)
You're just trying to get me to find out what's broken
and fix it! I'm on to that particular dastardly plot... ;)
It'd be somewhat usable if the MMC were live.
- dave
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Git tree updated to v2.6.29-rc1, omap-2.6.28 branch added
2009-01-16 7:59 ` David Brownell
@ 2009-01-16 8:12 ` Tony Lindgren
2009-01-16 8:51 ` Tony Lindgren
0 siblings, 1 reply; 8+ messages in thread
From: Tony Lindgren @ 2009-01-16 8:12 UTC (permalink / raw
To: dbrownell; +Cc: linux-omap
* David Brownell <david-b@pacbell.net> [090116 09:59]:
> On Thursday 15 January 2009, Tony Lindgren wrote:
> >
> > > Then when it tries to boot, (a) the HSMMC driver reports
> > > "error -110" then chokes, so no root FS; and then (b) MUSB
> > > misdetects the high speed hub as full speed then chokes,
> > > so no network links either. ....
> >
> > > That's on a trusty Beagle config. I don't think I'll be
> > > upgrading anything else just yet...
> >
> > Hmm, that sounds conservative! :)
>
> You're just trying to get me to find out what's broken
> and fix it! I'm on to that particular dastardly plot... ;)
Oh no, busted!
> It'd be somewhat usable if the MMC were live.
Seems to work on at least overo, no ideas what might have
happened to it on beagle.
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Git tree updated to v2.6.29-rc1, omap-2.6.28 branch added
2009-01-16 8:12 ` Tony Lindgren
@ 2009-01-16 8:51 ` Tony Lindgren
2009-01-18 3:46 ` David Brownell
0 siblings, 1 reply; 8+ messages in thread
From: Tony Lindgren @ 2009-01-16 8:51 UTC (permalink / raw
To: dbrownell; +Cc: linux-omap
* Tony Lindgren <tony@atomide.com> [090116 10:13]:
> * David Brownell <david-b@pacbell.net> [090116 09:59]:
> > On Thursday 15 January 2009, Tony Lindgren wrote:
> > >
> > > > Then when it tries to boot, (a) the HSMMC driver reports
> > > > "error -110" then chokes, so no root FS; and then (b) MUSB
> > > > misdetects the high speed hub as full speed then chokes,
> > > > so no network links either. ....
> > >
> > > > That's on a trusty Beagle config. I don't think I'll be
> > > > upgrading anything else just yet...
> > >
> > > Hmm, that sounds conservative! :)
> >
> > You're just trying to get me to find out what's broken
> > and fix it! I'm on to that particular dastardly plot... ;)
>
> Oh no, busted!
>
> > It'd be somewhat usable if the MMC were live.
>
> Seems to work on at least overo, no ideas what might have
> happened to it on beagle.
MMC seems to work also on omap3430sdp.
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Git tree updated to v2.6.29-rc1, omap-2.6.28 branch added
2009-01-16 8:51 ` Tony Lindgren
@ 2009-01-18 3:46 ` David Brownell
0 siblings, 0 replies; 8+ messages in thread
From: David Brownell @ 2009-01-18 3:46 UTC (permalink / raw
To: Tony Lindgren; +Cc: linux-omap
> Then when it tries to boot, (a) the HSMMC driver reports
> "error -110" then chokes, so no root FS; and then (b) MUSB
> misdetects the high speed hub as full speed then chokes,
> so no network links either. ....
Found it. A Kconfig option I thought was "off" got turned "on".
Even though the VMMC1, VDAC, VUSB1V5, VUSB1V8, and VUSB3V1
rails aren't yet enabled by the drivers using them ... they
sort of need to be left on (except for VDAC). ;)
- Dave
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2009-01-18 3:53 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-01-15 15:43 Git tree updated to v2.6.29-rc1, omap-2.6.28 branch added Tony Lindgren
2009-01-15 18:21 ` David Brownell
2009-01-15 22:01 ` David Brownell
2009-01-16 7:44 ` Tony Lindgren
2009-01-16 7:59 ` David Brownell
2009-01-16 8:12 ` Tony Lindgren
2009-01-16 8:51 ` Tony Lindgren
2009-01-18 3:46 ` David Brownell
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.