* sh: Add supoprt SCIF2 of SH7763
@ 2008-06-06 7:11 Nobuhiro Iwamatsu
2008-06-07 2:39 ` Paul Mundt
0 siblings, 1 reply; 2+ messages in thread
From: Nobuhiro Iwamatsu @ 2008-06-06 7:11 UTC (permalink / raw
To: linux-sh
SH7763 has 3 SCIF device. Current code supports SCIF0 and 1.
SCIF0 and 1 are same register constitution, but only SCIF2 is different.
I added support of SCIF2.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
---
arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 10 ++++++-
drivers/serial/sh-sci.c | 17 +++++++++++++-
drivers/serial/sh-sci.h | 38 ++++++++++++++++++++++---------
3 files changed, 51 insertions(+), 14 deletions(-)
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index f189a55..3b278df 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -3,6 +3,7 @@
*
* Copyright (C) 2006 Paul Mundt
* Copyright (C) 2007 Yoshihiro Shimoda
+ * Copyright (C) 2008 Nobuhiro Iwamatsu
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -56,6 +57,11 @@ static struct plat_sci_port sci_platform_data[] = {
.type = PORT_SCIF,
.irqs = { 76, 77, 79, 78 },
}, {
+ .mapbase = 0xffe10000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 104, 105, 107, 106 },
+ }, {
.flags = 0,
}
};
@@ -208,8 +214,8 @@ static struct intc_vect vectors[] __initdata = {
INTC_VECT(TMU5, 0xe40), INTC_VECT(ADC, 0xe60),
INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0),
INTC_VECT(SSI2, 0xec0), INTC_VECT(SSI3, 0xee0),
- INTC_VECT(SCIF1_ERI, 0xf00), INTC_VECT(SCIF1_RXI, 0xf20),
- INTC_VECT(SCIF1_BRI, 0xf40), INTC_VECT(SCIF1_TXI, 0xf60),
+ INTC_VECT(SCIF2_ERI, 0xf00), INTC_VECT(SCIF2_RXI, 0xf20),
+ INTC_VECT(SCIF2_BRI, 0xf40), INTC_VECT(SCIF2_TXI, 0xf60),
INTC_VECT(GPIO_CH0, 0xf80), INTC_VECT(GPIO_CH1, 0xfa0),
INTC_VECT(GPIO_CH2, 0xfc0), INTC_VECT(GPIO_CH3, 0xfe0),
};
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index ce6ee92..f3c3071 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -410,7 +410,6 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
- defined(CONFIG_CPU_SUBTYPE_SH7763) || \
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785)
static inline int scif_txroom(struct uart_port *port)
@@ -422,6 +421,22 @@ static inline int scif_rxroom(struct uart_port *port)
{
return sci_in(port, SCRFDR) & 0xff;
}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
+static inline int scif_txroom(struct uart_port *port)
+{
+ if((port->mapbase = 0xffe00000) || (port->mapbase = 0xffe08000)) /* SCIF0/1*/
+ return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0xff);
+ else /* SCIF2 */
+ return SCIF2_TXROOM_MAX - (sci_in(port, SCFDR) >> 8);
+}
+
+static inline int scif_rxroom(struct uart_port *port)
+{
+ if((port->mapbase = 0xffe00000) || (port->mapbase = 0xffe08000)) /* SCIF0/1*/
+ return sci_in(port, SCRFDR) & 0xff;
+ else /* SCIF2 */
+ return sci_in(port, SCFDR) & SCIF2_RFDC_MASK;
+}
#else
static inline int scif_txroom(struct uart_port *port)
{
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index eb84833..cd728df 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -123,8 +123,9 @@
#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
# define SCSPTR0 0xffe00024 /* 16 bit SCIF */
# define SCSPTR1 0xffe08024 /* 16 bit SCIF */
+# define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */
# define SCIF_ORER 0x0001 /* overrun error bit */
-# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
# define SCSPTR0 0xff923020 /* 16 bit SCIF */
@@ -188,6 +189,7 @@
defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
defined(CONFIG_CPU_SUBTYPE_SH7751) || \
defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7763) || \
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785) || \
defined(CONFIG_CPU_SUBTYPE_SHX3)
@@ -225,14 +227,21 @@
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define SCIF_ORER 0x0200
-#define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
-#define SCIF_RFDC_MASK 0x007f
-#define SCIF_TXROOM_MAX 64
+# define SCIF_ORER 0x0200
+# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
+# define SCIF_RFDC_MASK 0x007f
+# define SCIF_TXROOM_MAX 64
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
+# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK )
+# define SCIF_RFDC_MASK 0x007f
+# define SCIF_TXROOM_MAX 64
+/* SH7763 SCIF2 support */
+# define SCIF2_RFDC_MASK 0x001f
+# define SCIF2_TXROOM_MAX 16
#else
-#define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
-#define SCIF_RFDC_MASK 0x001f
-#define SCIF_TXROOM_MAX 16
+# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
+# define SCIF_RFDC_MASK 0x001f
+# define SCIF_TXROOM_MAX 16
#endif
#if defined(SCI_ONLY)
@@ -445,11 +454,16 @@ SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16)
defined(CONFIG_CPU_SUBTYPE_SH7763) || \
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785)
-SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16)
SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16)
SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16)
SCIF_FNS(SCSPTR, 0, 0, 0x24, 16)
SCIF_FNS(SCLSR, 0, 0, 0x28, 16)
+#if defined(CONFIG_CPU_SUBTYPE_SH7763)
+/* SH7763 SCIF2 */
+SCIF_FNS(SCFDR, 0, 0, 0x1C, 16)
+SCIF_FNS(SCSPTR2, 0, 0, 0x20, 16)
+SCIF_FNS(SCLSR2, 0, 0, 0x24, 16)
+#endif /* CONFIG_CPU_SUBTYPE_SH7763 */
#else
SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16)
#if defined(CONFIG_CPU_SUBTYPE_SH7722)
@@ -652,6 +666,9 @@ static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
if (port->mapbase = 0xffe08000)
return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+ if (port->mapbase = 0xffe10000)
+ return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF/IRDA */
+
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
@@ -764,8 +781,7 @@ static inline int sci_rxd_in(struct uart_port *port)
* -- Mitch Davis - 15 Jul 2000
*/
-#if defined(CONFIG_CPU_SUBTYPE_SH7763) || \
- defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+#if defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785)
#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
--
1.5.5.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: sh: Add supoprt SCIF2 of SH7763
2008-06-06 7:11 sh: Add supoprt SCIF2 of SH7763 Nobuhiro Iwamatsu
@ 2008-06-07 2:39 ` Paul Mundt
0 siblings, 0 replies; 2+ messages in thread
From: Paul Mundt @ 2008-06-07 2:39 UTC (permalink / raw
To: linux-sh
On Fri, Jun 06, 2008 at 04:11:59PM +0900, Nobuhiro Iwamatsu wrote:
> SH7763 has 3 SCIF device. Current code supports SCIF0 and 1.
> SCIF0 and 1 are same register constitution, but only SCIF2 is different.
> I added support of SCIF2.
>
> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Added to the 2.6.27 queue, thanks.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2008-06-07 2:39 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-06-06 7:11 sh: Add supoprt SCIF2 of SH7763 Nobuhiro Iwamatsu
2008-06-07 2:39 ` Paul Mundt
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.