* Re: Bug#226973: xserver-xfree86: [glint] second card at wrong resolution
[not found] ` <20040112215543.GB2150@scowler.net>
@ 2004-01-13 7:41 ` Sven Luther
2004-01-13 15:40 ` Clint Adams
0 siblings, 1 reply; 19+ messages in thread
From: Sven Luther @ 2004-01-13 7:41 UTC (permalink / raw
To: Clint Adams; +Cc: Sven Luther, 226973, linux-fbdev-devel
On Mon, Jan 12, 2004 at 04:55:43PM -0500, Clint Adams wrote:
> > Could you also provide the /var/log/XFree86.0.log, and please CC me on
> > this bugreport.
>
> Sure. I don't know if this is relevant, but the first card is is
> picked up by the PM2 framebuffer driver (the second is not, because the
> driver doesn't support multiple cards--I'm trying to copy the multiple
> card support from pm3fb but I don't really know what I'm doing.
Ok, this may be the problem. The first one is initialized by the pm2fb,
while the second is not. This mean either some initialization problems,
or the fact that X doesn't initialize some values set by pm2fb.
What kernel are you using, maybe it would be best to work on a 2.6
kernel and try to adapt the pm2fb to the new framework or something.
Can you describe me the symptoms again ? what exactly did you see on the
second head ?
Also, i am CCing the linux-fbdev mailing list, as there are chance that
they would have an insight on this.
Friendly,
Sven Luther
> /var/log/XFree86.0.log:
>
> This is a pre-release version of XFree86, and is not supported in any
> way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
> to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
> please check the latest version in the XFree86 CVS repository
> (http://www.XFree86.Org/cvs).
>
> XFree86 Version 4.3.0.1 (Debian 4.3.0-0pre1v3 20030929061855 ilmari@ilmari.org)
> Release Date: 15 August 2003
> X Protocol Version 11, Revision 0, Release 6.6
> Build Operating System: Linux 2.4.18 sparc [ELF]
> Build Date: 29 September 2003
> Before reporting problems, check http://www.XFree86.Org/
> to make sure that you have the latest version.
> Module Loader present
> OS Kernel: Linux version 2.4.24 (clint@rashudo) (gcc version 3.3.3 20031229 (prerelease) (Debian)) #1 Mon Jan 12 14:44:22 EST 2004
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/XFree86.0.log", Time: Mon Jan 12 15:30:54 2004
> (==) Using config file: "/etc/X11/XF86Config-4"
> (==) ServerLayout "Default Layout"
> (**) |-->Screen "Default Screen" (0)
> (**) | |-->Monitor "Sun"
> (**) | |-->Device "TSI Raptor GFX 8P"
> (**) |-->Screen "Screen Two" (1)
> (**) | |-->Monitor "Sun2"
> (**) | |-->Device "TSI Raptor GFX 8P 2"
> (**) |-->Input Device "Generic Keyboard"
> (**) Option "XkbRules" "xfree86"
> (**) XKB: rules: "xfree86"
> (**) Option "XkbModel" "pc104"
> (**) XKB: model: "pc104"
> (**) Option "XkbLayout" "us"
> (**) XKB: layout: "us"
> (==) Keyboard: CustomKeycode disabled
> (**) |-->Input Device "Configured Mouse"
> (WW) The directory "/usr/lib/X11/fonts/CID" does not exist.
> Entry deleted from font path.
> (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
> Entry deleted from font path.
> (WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID".
> Entry deleted from font path.
> (Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID").
> (**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
> (==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (==) ModulePath set to "/usr/X11R6/lib/modules"
> (++) using VT number 7
>
> (WW) Open APM failed (/dev/apm_bios) (No such file or directory)
> (II) Module ABI versions:
> XFree86 ANSI C Emulation: 0.2
> XFree86 Video Driver: 0.6
> XFree86 XInput driver : 0.4
> XFree86 Server Extension : 0.2
> XFree86 Font Renderer : 0.4
> (II) Loader running on linux
> (II) LoadModule: "bitmap"
> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Module bitmap: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.4
> (II) Loading font Bitmap
> (II) LoadModule: "pcidata"
> (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> (II) Module pcidata: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.6
> (II) PCI: PCI scan (all values are in hex)
> (II) PCI: 00:00:0: chip 108e,a001 card 0000,0000 rev 00 class 06,00,00 hdr 00
> (II) PCI: 00:03:0: chip 10b9,7101 card 0000,0000 rev 00 class 00,00,00 hdr 00
> (II) PCI: 00:05:0: chip 1011,0024 card 0000,0000 rev 03 class 06,04,00 hdr 01
> (II) PCI: 00:07:0: chip 10b9,1533 card 10b9,1533 rev 00 class 06,01,00 hdr 00
> (II) PCI: 00:08:0: chip 10b9,5451 card 10b9,5451 rev 01 class 04,01,00 hdr 00
> (II) PCI: 00:0c:0: chip 108e,1100 card 0000,0000 rev 01 class 06,80,00 hdr 80
> (II) PCI: 00:0c:1: chip 108e,1101 card 0000,0000 rev 01 class 02,00,00 hdr 80
> (II) PCI: 00:0c:2: chip 108e,1102 card 0000,0000 rev 01 class 0c,00,10 hdr 80
> (II) PCI: 00:0c:3: chip 108e,1103 card 0000,0000 rev 01 class 0c,03,10 hdr 80
> (II) PCI: 00:0d:0: chip 10b9,5229 card 0000,0000 rev c3 class 01,01,ff hdr 00
> (II) PCI: 00:13:0: chip 1002,4752 card 0000,0000 rev 65 class 03,00,00 hdr 00
> (II) PCI: 01:00:0: chip 3d3d,0009 card 1227,0006 rev 01 class 03,80,00 hdr 00
> (II) PCI: 01:01:0: chip 3d3d,0009 card 1227,0006 rev 01 class 03,80,00 hdr 00
> (II) PCI: End of PCI scan
> (II) Host-to-PCI bridge:
> (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
> (II) Bus 0 I/O range:
> [0] -1 1 0x00000000 - 0x00ffffff (0x1000000) IX[B]
> (II) Bus 0 non-prefetchable memory range:
> [0] -1 1 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 0 prefetchable memory range:
> [0] -1 1 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) PCI-to-PCI bridge:
> (II) Bus 1: bridge is at (0:5:0), (0,1,1), BCTRL: 0x0000 (VGA_EN is cleared)
> (II) Bus 1 non-prefetchable memory range:
> [0] -1 1 0x03000000 - 0x057fffff (0x2800000) MX[B]
> (II) PCI-to-ISA bridge:
> (II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
> (!!) More than one possible primary device found
> (--) PCI: (0:3:0) ALi Corporation M7101 PMU rev 0
> (--) PCI: (0:19:0) ATI Technologies Inc Rage XL rev 101, Mem @ 0x06000000/24, 0x00426000/12, I/O @ 0x0b00/8, BIOS @ 0x00440000/17
> (--) PCI: (1:0:0) 3DLabs Permedia II 2D+3D rev 1, Mem @ 0x03000000/17, 0x03800000/23, 0x04000000/23, BIOS @ 0x03020000/16
> (--) PCI: (1:1:0) 3DLabs Permedia II 2D+3D rev 1, Mem @ 0x03040000/17, 0x04800000/23, 0x05000000/23, BIOS @ 0x03030000/16
> (II) Addressable bus resource ranges are
> [0] -1 1 0x00000000 - 0xffffffff (0x0) MX[B]
> [1] -1 1 0x00000000 - 0x00ffffff (0x1000000) IX[B]
> (II) OS-reported resource ranges:
> [0] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
> [1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
> [5] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
> (II) Active PCI resource ranges:
> [0] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
> [1] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
> [2] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
> [3] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
> [4] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
> [5] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
> [6] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
> [7] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
> [8] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
> [9] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
> [10] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
> [11] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
> [12] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
> [13] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
> [14] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
> [15] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
> [16] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
> [17] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
> [18] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
> [19] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
> [20] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
> [21] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
> [22] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
> [23] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
> [24] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
> (II) Active PCI resource ranges after removing overlaps:
> [0] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
> [1] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
> [2] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
> [3] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
> [4] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
> [5] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
> [6] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
> [7] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
> [8] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
> [9] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
> [10] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
> [11] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
> [12] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
> [13] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
> [14] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
> [15] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
> [16] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
> [17] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
> [18] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
> [19] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
> [20] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
> [21] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
> [22] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
> [23] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
> [24] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
> (II) OS-reported resource ranges after removing overlaps with PCI:
> [0] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
> [1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
> [5] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
> (II) All system resource ranges:
> [0] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
> [1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
> [5] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
> [6] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
> [7] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
> [8] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
> [9] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
> [10] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
> [11] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
> [12] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
> [13] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
> [14] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
> [15] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
> [16] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
> [17] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
> [18] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
> [19] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
> [20] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
> [21] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
> [22] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
> [23] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
> [24] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
> [25] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
> [26] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
> [27] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
> [28] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
> [29] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
> [30] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
> (II) LoadModule: "GLcore"
> (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
> Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": No symbols found
> Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": No symbols found
> Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o": No symbols found
> Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o": No symbols found
> (II) Module GLcore: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> ABI class: XFree86 Server Extension, version 0.2
> (II) LoadModule: "bitmap"
> (II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Loading font Bitmap
> (II) LoadModule: "dbe"
> (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
> (II) Module dbe: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.2
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "ddc"
> (II) Loading /usr/X11R6/lib/modules/libddc.a
> (II) Module ddc: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.6
> (II) LoadModule: "dri"
> (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
> (II) Module dri: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> ABI class: XFree86 Server Extension, version 0.2
> (II) Loading sub module "drm"
> (II) LoadModule: "drm"
> (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
> (II) Module drm: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> ABI class: XFree86 Server Extension, version 0.2
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "extmod"
> (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
> (II) Module extmod: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.2
> (II) Loading extension SHAPE
> (II) Loading extension MIT-SUNDRY-NONSTANDARD
> (II) Loading extension BIG-REQUESTS
> (II) Loading extension SYNC
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XC-MISC
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-Misc
> (II) Loading extension XFree86-DGA
> (II) Loading extension DPMS
> (II) Loading extension FontCache
> (II) Loading extension TOG-CUP
> (II) Loading extension Extended-Visual-Information
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
> (II) LoadModule: "freetype"
> (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
> (II) Module freetype: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 2.0.2
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.4
> (II) Loading font FreeType
> (II) LoadModule: "glx"
> (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
> (II) Module glx: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> ABI class: XFree86 Server Extension, version 0.2
> (II) Loading sub module "GLcore"
> (II) LoadModule: "GLcore"
> (II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
> (II) Loading extension GLX
> (II) LoadModule: "int10"
> (II) Loading /usr/X11R6/lib/modules/libint10.a
> (II) Module int10: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.6
> (II) LoadModule: "record"
> (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
> (II) Module record: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.13.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.2
> (II) Loading extension RECORD
> (II) LoadModule: "speedo"
> (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
> Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found
> (II) Module speedo: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.1
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.4
> (II) Loading font Speedo
> (II) LoadModule: "type1"
> (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
> (II) Module type1: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.2
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.4
> (II) Loading font Type1
> (II) Loading font CID
> (II) LoadModule: "vbe"
> (II) Loading /usr/X11R6/lib/modules/libvbe.a
> (II) Module vbe: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.1.0
> ABI class: XFree86 Video Driver, version 0.6
> (II) LoadModule: "glint"
> (II) Loading /usr/X11R6/lib/modules/drivers/glint_drv.o
> (II) Module glint: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> Module class: XFree86 Video Driver
> ABI class: XFree86 Video Driver, version 0.6
> (II) LoadModule: "mouse"
> (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> (II) Module mouse: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> Module class: XFree86 XInput Driver
> ABI class: XFree86 XInput driver, version 0.4
> (II) GLINT: driver for 3Dlabs chipsets: gamma, gamma2, ti_pm2, ti_pm, r4,
> pm4, pm3, pm2v, pm2, pm, 300sx, 500tx, mx, delta
> (II) Primary Device is:
> (--) Chipset pm2v found
> (--) Chipset pm2v found
> (II) resource ranges after xf86ClaimFixedResources() call:
> [0] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
> [1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
> [5] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
> [6] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
> [7] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
> [8] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
> [9] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
> [10] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
> [11] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
> [12] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
> [13] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
> [14] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
> [15] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
> [16] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
> [17] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
> [18] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
> [19] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
> [20] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
> [21] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
> [22] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
> [23] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
> [24] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
> [25] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
> [26] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
> [27] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
> [28] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
> [29] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
> [30] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
> (II) resource ranges after xf86ClaimFixedResources() call:
> [0] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
> [1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
> [5] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
> [6] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
> [7] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
> [8] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
> [9] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
> [10] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
> [11] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
> [12] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
> [13] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
> [14] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
> [15] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
> [16] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
> [17] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
> [18] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
> [19] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
> [20] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
> [21] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
> [22] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
> [23] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
> [24] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
> [25] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
> [26] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
> [27] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
> [28] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
> [29] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
> [30] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
> (II) resource ranges after probing:
> [0] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
> [1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
> [5] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
> [6] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
> [7] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
> [8] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
> [9] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
> [10] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
> [11] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
> [12] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
> [13] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
> [14] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
> [15] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
> [16] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
> [17] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
> [18] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
> [19] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
> [20] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
> [21] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
> [22] 0 1 0x000a0000 - 0x000affff (0x10000) MS[B]
> [23] 0 1 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [24] 0 1 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [25] 1 1 0x000a0000 - 0x000affff (0x10000) MS[B]
> [26] 1 1 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [27] 1 1 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [28] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
> [29] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
> [30] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
> [31] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
> [32] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
> [33] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
> [34] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
> [35] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
> [36] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
> [37] 0 1 0x000003b0 - 0x000003bb (0xc) IS[B]
> [38] 0 1 0x000003c0 - 0x000003df (0x20) IS[B]
> [39] 1 1 0x000003b0 - 0x000003bb (0xc) IS[B]
> [40] 1 1 0x000003c0 - 0x000003df (0x20) IS[B]
> (II) Setting vga for screen 0.
> (II) Setting vga for screen 1.
> (**) GLINT(0): Depth 24, (--) framebuffer bpp 32
> (==) GLINT(0): RGB weight 888
> (==) GLINT(0): Default visual is TrueColor
> (==) GLINT(0): Using gamma correction (1.0, 1.0, 1.0)
> (==) GLINT(0): Using HW cursor
> (--) GLINT(0): Not using Linux framebuffer device
> (--) GLINT(0): Chipset: "pm2v"
> (--) GLINT(0): Linear framebuffer at 0x4000000
> (--) GLINT(0): MMIO registers at 0x3010000
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Reloading /usr/X11R6/lib/modules/libint10.a
> (II) GLINT(0): Initializing int10
> (II) Multi Device Card detected: [1:0:0][1:1:0]
> (EE) GLINT(0): Cannot read V_BIOS (5)
> (--) GLINT(0): VideoRAM: 8192 kByte
> (II) Loading sub module "ramdac"
> (II) LoadModule: "ramdac"
> (II) Loading /usr/X11R6/lib/modules/libramdac.a
> (II) Module ramdac: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.6
> (--) GLINT(0): FIFO Size is 256 DWORDS
> (==) GLINT(0): Min pixel clock is 16 MHz
> (--) GLINT(0): Max pixel clock is 110 MHz
> (II) GLINT(0): Sun: Using hsync range of 30.00-82.00 kHz
> (II) GLINT(0): Sun: Using vrefresh range of 50.00-120.00 Hz
> (II) GLINT(0): Clock range: 16.25 to 110.00 MHz
> (II) GLINT(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1792x1344" (insufficient memory for mode)
> (II) GLINT(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1792x1344" (insufficient memory for mode)
> (II) GLINT(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1856x1392" (insufficient memory for mode)
> (II) GLINT(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1856x1392" (insufficient memory for mode)
> (II) GLINT(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1920x1440" (insufficient memory for mode)
> (II) GLINT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1920x1440" (insufficient memory for mode)
> (II) GLINT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "1920x1440" (insufficient memory for mode)
> (II) GLINT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "2048x1536" (insufficient memory for mode)
> (II) GLINT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "2048x1536" (insufficient memory for mode)
> (II) GLINT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
> (II) GLINT(0): Not using default mode "2048x1536" (insufficient memory for mode)
> (II) GLINT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
> (--) GLINT(0): Virtual size is 1280x1024 (pitch 1280)
> (**) GLINT(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
> (II) GLINT(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
> (**) GLINT(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
> (II) GLINT(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
> (**) GLINT(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
> (II) GLINT(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
> (**) GLINT(0): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
> (II) GLINT(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
> (**) GLINT(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
> (II) GLINT(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
> (**) GLINT(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
> (II) GLINT(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
> (**) GLINT(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
> (II) GLINT(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
> (**) GLINT(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
> (II) GLINT(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
> (**) GLINT(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
> (II) GLINT(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
> (**) GLINT(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
> (II) GLINT(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
> (**) GLINT(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
> (II) GLINT(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
> (**) GLINT(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
> (II) GLINT(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
> (**) GLINT(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
> (II) GLINT(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
> (**) GLINT(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
> (II) GLINT(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
> (**) GLINT(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
> (II) GLINT(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
> (**) GLINT(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
> (II) GLINT(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
> (**) GLINT(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
> (II) GLINT(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
> (**) GLINT(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
> (II) GLINT(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
> (**) GLINT(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
> (II) GLINT(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
> (**) GLINT(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
> (II) GLINT(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
> (**) GLINT(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
> (II) GLINT(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
> (++) GLINT(0): DPI set to (100, 100)
> (II) Loading sub module "fb"
> (II) LoadModule: "fb"
> (II) Loading /usr/X11R6/lib/modules/libfb.a
> (II) Module fb: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> ABI class: XFree86 ANSI C Emulation, version 0.2
> (II) Loading sub module "xaa"
> (II) LoadModule: "xaa"
> (II) Loading /usr/X11R6/lib/modules/libxaa.a
> (II) Module xaa: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.1.0
> ABI class: XFree86 Video Driver, version 0.6
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Reloading /usr/X11R6/lib/modules/libddc.a
> (II) Loading sub module "i2c"
> (II) LoadModule: "i2c"
> (II) Loading /usr/X11R6/lib/modules/libi2c.a
> (II) Module i2c: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.2.0
> ABI class: XFree86 Video Driver, version 0.6
> (II) GLINT(0): I2C bus "DDC" initialized.
> (II) GLINT(0): I2C bus "Video" initialized.
> (**) GLINT(1): Depth 24, (--) framebuffer bpp 32
> (==) GLINT(1): RGB weight 888
> (==) GLINT(1): Default visual is TrueColor
> (==) GLINT(1): Using gamma correction (1.0, 1.0, 1.0)
> (==) GLINT(1): Using HW cursor
> (--) GLINT(1): Not using Linux framebuffer device
> (--) GLINT(1): Chipset: "pm2v"
> (--) GLINT(1): Linear framebuffer at 0x5000000
> (--) GLINT(1): MMIO registers at 0x3050000
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Reloading /usr/X11R6/lib/modules/libint10.a
> (II) GLINT(1): Initializing int10
> (II) Multi Device Card detected: [1:0:0][1:1:0]
> (EE) GLINT(1): Cannot read V_BIOS (5)
> (--) GLINT(1): VideoRAM: 4096 kByte
> (II) Loading sub module "ramdac"
> (II) LoadModule: "ramdac"
> (II) Reloading /usr/X11R6/lib/modules/libramdac.a
> (--) GLINT(1): FIFO Size is 256 DWORDS
> (==) GLINT(1): Min pixel clock is 16 MHz
> (--) GLINT(1): Max pixel clock is 110 MHz
> (II) GLINT(1): Sun2: Using hsync range of 30.00-82.00 kHz
> (II) GLINT(1): Sun2: Using vrefresh range of 50.00-120.00 Hz
> (II) GLINT(1): Clock range: 16.25 to 110.00 MHz
> (II) GLINT(1): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "1280x960" (insufficient memory for mode)
> (II) GLINT(1): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "1280x960" (insufficient memory for mode)
> (II) GLINT(1): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "1280x1024" (insufficient memory for mode)
> (II) GLINT(1): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "1280x1024" (insufficient memory for mode)
> (II) GLINT(1): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "1280x1024" (insufficient memory for mode)
> (II) GLINT(1): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "1600x1200" (insufficient memory for mode)
> (II) GLINT(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "1600x1200" (insufficient memory for mode)
> (II) GLINT(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "1600x1200" (insufficient memory for mode)
> (II) GLINT(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "1600x1200" (insufficient memory for mode)
> (II) GLINT(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "1600x1200" (insufficient memory for mode)
> (II) GLINT(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "1792x1344" (insufficient memory for mode)
> (II) GLINT(1): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "1792x1344" (insufficient memory for mode)
> (II) GLINT(1): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "1856x1392" (insufficient memory for mode)
> (II) GLINT(1): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "1856x1392" (insufficient memory for mode)
> (II) GLINT(1): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "1920x1440" (insufficient memory for mode)
> (II) GLINT(1): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "1920x1440" (insufficient memory for mode)
> (II) GLINT(1): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "1400x1050" (insufficient memory for mode)
> (II) GLINT(1): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "1400x1050" (insufficient memory for mode)
> (II) GLINT(1): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "1600x1024" (insufficient memory for mode)
> (II) GLINT(1): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "1920x1440" (insufficient memory for mode)
> (II) GLINT(1): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "2048x1536" (insufficient memory for mode)
> (II) GLINT(1): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "2048x1536" (insufficient memory for mode)
> (II) GLINT(1): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using default mode "2048x1536" (insufficient memory for mode)
> (II) GLINT(1): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
> (II) GLINT(1): Not using mode "1280x1024" (no mode of this name)
> (--) GLINT(1): Virtual size is 1152x864 (pitch 1152)
> (**) GLINT(1): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
> (II) GLINT(1): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
> (**) GLINT(1): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
> (II) GLINT(1): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
> (**) GLINT(1): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
> (II) GLINT(1): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
> (**) GLINT(1): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
> (II) GLINT(1): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
> (**) GLINT(1): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
> (II) GLINT(1): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
> (**) GLINT(1): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
> (II) GLINT(1): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
> (**) GLINT(1): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
> (II) GLINT(1): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
> (**) GLINT(1): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
> (II) GLINT(1): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
> (**) GLINT(1): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
> (II) GLINT(1): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
> (**) GLINT(1): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
> (II) GLINT(1): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
> (**) GLINT(1): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
> (II) GLINT(1): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
> (**) GLINT(1): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
> (II) GLINT(1): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
> (**) GLINT(1): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
> (II) GLINT(1): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
> (**) GLINT(1): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
> (II) GLINT(1): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
> (**) GLINT(1): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
> (II) GLINT(1): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
> (**) GLINT(1): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
> (II) GLINT(1): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
> (**) GLINT(1): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
> (II) GLINT(1): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
> (**) GLINT(1): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
> (II) GLINT(1): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
> (**) GLINT(1): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
> (II) GLINT(1): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
> (++) GLINT(1): DPI set to (100, 100)
> (II) Loading sub module "fb"
> (II) LoadModule: "fb"
> (II) Reloading /usr/X11R6/lib/modules/libfb.a
> (II) Loading sub module "xaa"
> (II) LoadModule: "xaa"
> (II) Reloading /usr/X11R6/lib/modules/libxaa.a
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Reloading /usr/X11R6/lib/modules/libddc.a
> (II) Loading sub module "i2c"
> (II) LoadModule: "i2c"
> (II) Reloading /usr/X11R6/lib/modules/libi2c.a
> (II) GLINT(1): I2C bus "DDC" initialized.
> (II) GLINT(1): I2C bus "Video" initialized.
> (--) Depth 24 pixmap format is 32 bpp
> (II) do I need RAC? Yes, I do.
> (II) LoadModule: "rac"
> (II) Loading /usr/X11R6/lib/modules/librac.a
> (II) Module rac: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.6
> (II) resource ranges after preInit:
> [0] 1 1 0x05000000 - 0x057fffff (0x800000) MX[B]
> [1] 1 1 0x04800000 - 0x04ffffff (0x800000) MX[B]
> [2] 1 1 0x03040000 - 0x0305ffff (0x20000) MX[B]
> [3] 0 1 0x04000000 - 0x047fffff (0x800000) MX[B]
> [4] 0 1 0x03800000 - 0x03ffffff (0x800000) MX[B]
> [5] 0 1 0x03000000 - 0x0301ffff (0x20000) MX[B]
> [6] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
> [7] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [8] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
> [9] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [10] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
> [11] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
> [12] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
> [13] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
> [14] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
> [15] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
> [16] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
> [17] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
> [18] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
> [19] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
> [20] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
> [21] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
> [22] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
> [23] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
> [24] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
> [25] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
> [26] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
> [27] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
> [28] 0 1 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
> [29] 0 1 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
> [30] 0 1 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
> [31] 1 1 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
> [32] 1 1 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
> [33] 1 1 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
> [34] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
> [35] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
> [36] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
> [37] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
> [38] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
> [39] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
> [40] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
> [41] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
> [42] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
> [43] 0 1 0x000003b0 - 0x000003bb (0xc) IS[B](OprD)
> [44] 0 1 0x000003c0 - 0x000003df (0x20) IS[B](OprD)
> [45] 1 1 0x000003b0 - 0x000003bb (0xc) IS[B](OprD)
> [46] 1 1 0x000003c0 - 0x000003df (0x20) IS[B](OprD)
> (II) GLINT(0): I2C device "DDC:ddc2" registered at address 0xA0.
> (II) GLINT(0): I2C device "DDC:ddc2" removed.
> (II) GLINT(0): Using XFree86 Acceleration Architecture (XAA)
> Screen to screen bit blits
> Solid filled rectangles
> 8x8 mono pattern filled rectangles
> Indirect CPU to Screen color expansion
> Solid Lines
> Offscreen Pixmaps
> Driver provided WriteBitmap replacement
> Driver provided WritePixmap replacement
> Setting up tile and stipple cache:
> 20 128x128 slots
> 5 256x256 slots
> (==) GLINT(0): Backing store disabled
> (==) GLINT(0): Silken mouse enabled
> (**) Option "dpms"
> (**) GLINT(0): DPMS enabled
> (II) GLINT(0): direct rendering disabled
> (II) GLINT(0): Initializing Xv driver rev. 4
> (II) GLINT(0): Xv frontend scaler enabled
> (==) RandR enabled
> (II) GLINT(1): I2C device "DDC:ddc2" registered at address 0xA0.
> (II) GLINT(1): I2C device "DDC:ddc2" removed.
> (II) GLINT(1): I2C device "DDC:ddc2" registered at address 0xA0.
> (II) GLINT(1): I2C device "DDC:ddc2" removed.
> (II) GLINT(1): Manufacturer: SUN Model: 577 Serial#: 206324300
> (II) GLINT(1): Year: 2000 Week: 37
> (II) GLINT(1): EDID Version: 1.2
> (II) GLINT(1): Analog Display Input, Input Voltage Level: 0.700/0.300 V
> (II) GLINT(1): Sync: Separate Composite SyncOnGreen
> (II) GLINT(1): Max H-Image Size [cm]: horiz.: 40 vert.: 30
> (II) GLINT(1): Gamma: 2.50
> (II) GLINT(1): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
> (II) GLINT(1): redX: 0.625 redY: 0.340 greenX: 0.280 greenY: 0.605
> (II) GLINT(1): blueX: 0.155 blueY: 0.070 whiteX: 0.283 whiteY: 0.298
> (II) GLINT(1): Supported VESA Video Modes:
> (II) GLINT(1): 720x400@70Hz
> (II) GLINT(1): 720x400@88Hz
> (II) GLINT(1): 640x480@60Hz
> (II) GLINT(1): 640x480@67Hz
> (II) GLINT(1): 640x480@72Hz
> (II) GLINT(1): 640x480@75Hz
> (II) GLINT(1): 800x600@56Hz
> (II) GLINT(1): 800x600@60Hz
> (II) GLINT(1): 800x600@72Hz
> (II) GLINT(1): 800x600@75Hz
> (II) GLINT(1): 832x624@75Hz
> (II) GLINT(1): 1024x768@87Hz (interlaced)
> (II) GLINT(1): 1024x768@60Hz
> (II) GLINT(1): 1024x768@70Hz
> (II) GLINT(1): 1024x768@75Hz
> (II) GLINT(1): 1280x1024@75Hz
> (II) GLINT(1): 1152x870@75Hz
> (II) GLINT(1): Manufacturer's mask: 0
> (II) GLINT(1): Supported Future Video Modes:
> (II) GLINT(1): #0: hsize: 1280 vsize 1024 refresh: 76 vid: 36993
> (II) GLINT(1): #1: hsize: 1152 vsize 921 refresh: 76 vid: 36977
> (II) GLINT(1): #2: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
> (II) GLINT(1): #3: hsize: 1280 vsize 1024 refresh: 67 vid: 34689
> (II) GLINT(1): #4: hsize: 1152 vsize 921 refresh: 66 vid: 34417
> (II) GLINT(1): #5: hsize: 1024 vsize 768 refresh: 75 vid: 20321
> (II) GLINT(1): #6: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
> (II) GLINT(1): #7: hsize: 1280 vsize 1024 refresh: 112 vid: 46209
> (II) GLINT(1): Ranges: V min: 48 V max: 160 Hz, H min: 30 H max: 121 kHz, PixClock max 210 MHz
> (II) GLINT(1): Monitor name: GDM-5410
> (II) GLINT(1): Serial No: 0037LB3148
> (II) GLINT(1): Supported additional Video Mode:
> (II) GLINT(1): clock: 135.0 MHz Image Size: 364 x 291 mm
> (II) GLINT(1): h_active: 1280 h_sync: 1312 h_sync_end 1376 h_blank_end 1664 h_border: 0
> (II) GLINT(1): v_active: 1024 v_sync: 1026 v_sync_end 1034 v_blanking: 1066 v_border: 0
> (II) GLINT(1): Using XFree86 Acceleration Architecture (XAA)
> Screen to screen bit blits
> Solid filled rectangles
> 8x8 mono pattern filled rectangles
> Indirect CPU to Screen color expansion
> Solid Lines
> Offscreen Pixmaps
> Driver provided WriteBitmap replacement
> Driver provided WritePixmap replacement
> Setting up tile and stipple cache:
> 9 128x46 slots
> (==) GLINT(1): Backing store disabled
> (==) GLINT(1): Silken mouse enabled
> (**) Option "dpms"
> (**) GLINT(1): DPMS enabled
> (II) GLINT(1): direct rendering disabled
> (II) GLINT(1): Initializing Xv driver rev. 4
> (II) GLINT(1): Xv frontend scaler enabled
> (==) RandR enabled
> (II) Entity 0 shares no resources
> (II) Entity 1 shares no resources
> (II) Initializing built-in extension MIT-SHM
> (II) Initializing built-in extension XInputExtension
> (II) Initializing built-in extension XTEST
> (II) Initializing built-in extension XKEYBOARD
> (II) Initializing built-in extension LBX
> (II) Initializing built-in extension XC-APPGROUP
> (II) Initializing built-in extension SECURITY
> (II) Initializing built-in extension XINERAMA
> (II) Initializing built-in extension XFree86-Bigfont
> (II) Initializing built-in extension RENDER
> (II) Initializing built-in extension RANDR
> (II) Keyboard "Generic Keyboard" handled by legacy driver
> (**) Option "Protocol" "ImPS/2"
> (**) Configured Mouse: Protocol: "ImPS/2"
> (**) Configured Mouse: Core Pointer
> (**) Option "Device" "/dev/input/mice"
> (**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
> (==) Configured Mouse: Buttons: 3
> (II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
> (II) Server_Terminate keybinding not found
> (II) Configured Mouse: ps2EnableDataReporting: succeeded
> Warning: font renderer for ".pcf" already registered at priority 0
> Warning: font renderer for ".pcf.Z" already registered at priority 0
> Warning: font renderer for ".pcf.gz" already registered at priority 0
> Warning: font renderer for ".snf" already registered at priority 0
> Warning: font renderer for ".snf.Z" already registered at priority 0
> Warning: font renderer for ".snf.gz" already registered at priority 0
> Warning: font renderer for ".bdf" already registered at priority 0
> Warning: font renderer for ".bdf.Z" already registered at priority 0
> Warning: font renderer for ".bdf.gz" already registered at priority 0
> Warning: font renderer for ".pmf" already registered at priority 0
> Could not init font path element unix/:7100, removing from list!
> (II) 3rd Button detected: disabling emulate3Button
> (II) Screen 0 shares mem & io resources
> (II) Screen 1 shares mem & io resources
> (WW) Open APM failed (/dev/apm_bios) (No such file or directory)
> (II) Screen 0 shares mem & io resources
> (II) Screen 1 shares mem & io resources
> (II) Screen 0 shares mem & io resources
> (II) Screen 1 shares mem & io resources
> (II) Entity 0 shares no resources
> (II) Entity 1 shares no resources
> (II) Configured Mouse: ps2EnableDataReporting: succeeded
-------------------------------------------------------
This SF.net email is sponsored by: Perforce Software.
Perforce is the Fast Software Configuration Management System offering
advanced branching capabilities and atomic changes on 50+ platforms.
Free Eval! http://www.perforce.com/perforce/loadprog.html
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Bug#226973: xserver-xfree86: [glint] second card at wrong resolution
2004-01-13 7:41 ` Bug#226973: xserver-xfree86: [glint] second card at wrong resolution Sven Luther
@ 2004-01-13 15:40 ` Clint Adams
2004-01-13 16:02 ` Sven Luther
0 siblings, 1 reply; 19+ messages in thread
From: Clint Adams @ 2004-01-13 15:40 UTC (permalink / raw
To: Sven Luther; +Cc: 226973, linux-fbdev-devel
> Ok, this may be the problem. The first one is initialized by the pm2fb,
> while the second is not. This mean either some initialization problems,
> or the fact that X doesn't initialize some values set by pm2fb.
Sound sreasonable.
> What kernel are you using, maybe it would be best to work on a 2.6
> kernel and try to adapt the pm2fb to the new framework or something.
Currently using Herbert's 2.4.24-1. I tried various 2.6 kernels prior
to 2.6.1, but xdm couldn't seem to start the server and the USB HID
drivers didn't seem to be functional.
> Can you describe me the symptoms again ? what exactly did you see on the
> second head ?
The second head is currently running WindowMaker with the default Debian
background. In the upper left corner, there is the 1/Main clip.
Directly to the right of that (I assume by 64 pixels or so) is the exact
same 1/Main clip. In the border between the two are some flickering
white lines. The rest of the screen is filled with horizontal
flickering black and whitish lines. The left edge of the swirl is on
the right hand side of the screen. It appears 5 times. The "debian"
only appears as "de", though there are about 5 d's and 3 or 4 e's,
overlapping. The clips themselves look perfect, but nothing else does.
Thanks.
-------------------------------------------------------
This SF.net email is sponsored by: Perforce Software.
Perforce is the Fast Software Configuration Management System offering
advanced branching capabilities and atomic changes on 50+ platforms.
Free Eval! http://www.perforce.com/perforce/loadprog.html
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Bug#226973: xserver-xfree86: [glint] second card at wrong resolution
2004-01-13 15:40 ` Clint Adams
@ 2004-01-13 16:02 ` Sven Luther
2004-01-14 21:06 ` Clint Adams
2004-01-14 21:12 ` Clint Adams
0 siblings, 2 replies; 19+ messages in thread
From: Sven Luther @ 2004-01-13 16:02 UTC (permalink / raw
To: Clint Adams; +Cc: Sven Luther, 226973, linux-fbdev-devel
On Tue, Jan 13, 2004 at 10:40:25AM -0500, Clint Adams wrote:
> > Ok, this may be the problem. The first one is initialized by the pm2fb,
> > while the second is not. This mean either some initialization problems,
> > or the fact that X doesn't initialize some values set by pm2fb.
>
> Sound sreasonable.
Yep. It probably doesn't happen on x86, since the int10 stuff
initializes the card with the onboard bios. Using a x86 emulator in X to
run this bios might be a solution.
> > What kernel are you using, maybe it would be best to work on a 2.6
> > kernel and try to adapt the pm2fb to the new framework or something.
>
> Currently using Herbert's 2.4.24-1. I tried various 2.6 kernels prior
> to 2.6.1, but xdm couldn't seem to start the server and the USB HID
> drivers didn't seem to be functional.
Mmm.
> > Can you describe me the symptoms again ? what exactly did you see on the
> > second head ?
>
> The second head is currently running WindowMaker with the default Debian
> background. In the upper left corner, there is the 1/Main clip.
> Directly to the right of that (I assume by 64 pixels or so) is the exact
> same 1/Main clip. In the border between the two are some flickering
Ho. definitively some registers who are bad. It has been a long time
since i have looked at the pm2 specs (kind of 98ish i think) though.
Maybe you could get hand of the free TI-pm2 specs and look for yourself ?
You would dump all the possible registers, and see which one is
different. Enabling debugging in the glint driver would also do. You can
safely run no-accel on these for the tests, as this is definitively not
an accel issue, but a video out/ramdac one.
> white lines. The rest of the screen is filled with horizontal
> flickering black and whitish lines. The left edge of the swirl is on
> the right hand side of the screen. It appears 5 times. The "debian"
> only appears as "de", though there are about 5 d's and 3 or 4 e's,
> overlapping. The clips themselves look perfect, but nothing else does.
Any color problem ?
Friendly,
Sven Luther
-------------------------------------------------------
This SF.net email is sponsored by: Perforce Software.
Perforce is the Fast Software Configuration Management System offering
advanced branching capabilities and atomic changes on 50+ platforms.
Free Eval! http://www.perforce.com/perforce/loadprog.html
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Bug#226973: xserver-xfree86: [glint] second card at wrong resolution
2004-01-13 16:02 ` Sven Luther
@ 2004-01-14 21:06 ` Clint Adams
2004-01-14 21:12 ` Sven Luther
2004-01-14 21:12 ` Clint Adams
1 sibling, 1 reply; 19+ messages in thread
From: Clint Adams @ 2004-01-14 21:06 UTC (permalink / raw
To: Sven Luther; +Cc: 226973, linux-fbdev-devel
[-- Attachment #1: Type: text/plain, Size: 966 bytes --]
> Yep. It probably doesn't happen on x86, since the int10 stuff
> initializes the card with the onboard bios. Using a x86 emulator in X to
> run this bios might be a solution.
According to Tech-Source, this card has no VGA bios..
> Ho. definitively some registers who are bad. It has been a long time
> since i have looked at the pm2 specs (kind of 98ish i think) though.
> Maybe you could get hand of the free TI-pm2 specs and look for yourself ?
I've been looking and not finding anything.
> You would dump all the possible registers, and see which one is
> different. Enabling debugging in the glint driver would also do. You can
> safely run no-accel on these for the tests, as this is definitively not
> an accel issue, but a video out/ramdac one.
Attached is the XFree86.0.log from xserver-xfree86-dbg. I'll start it
again with noaccel. The only thing I notice is that it thinks the
second card only has 4 megs of video ram.
> Any color problem ?
No.
[-- Attachment #2: XFree86.0.log --]
[-- Type: text/plain, Size: 47349 bytes --]
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).
XFree86 Version 4.3.0.1 (Debian (static) 4.3.0-0pre1v3 20030929061855 ilmari@ilmari.org)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.18 sparc [ELF]
Build Date: 29 September 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
OS Kernel: Linux version 2.4.24 (clint@rashudo) (gcc version 3.3.3 20031229 (prerelease) (Debian)) #1 Mon Jan 12 14:44:22 EST 2004
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Jan 14 15:47:31 2004
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Sun"
(**) | |-->Device "TSI Raptor GFX 8P"
(**) |-->Screen "Screen Two" (1)
(**) | |-->Monitor "Sun2"
(**) | |-->Device "TSI Raptor GFX 8P 2"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(WW) The directory "/usr/lib/X11/fonts/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID".
Entry deleted from font path.
(Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID").
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(++) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 108e,a001 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:03:0: chip 10b9,7101 card 0000,0000 rev 00 class 00,00,00 hdr 00
(II) PCI: 00:05:0: chip 1011,0024 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 10b9,1533 card 10b9,1533 rev 00 class 06,01,00 hdr 00
(II) PCI: 00:08:0: chip 10b9,5451 card 10b9,5451 rev 01 class 04,01,00 hdr 00
(II) PCI: 00:0c:0: chip 108e,1100 card 0000,0000 rev 01 class 06,80,00 hdr 80
(II) PCI: 00:0c:1: chip 108e,1101 card 0000,0000 rev 01 class 02,00,00 hdr 80
(II) PCI: 00:0c:2: chip 108e,1102 card 0000,0000 rev 01 class 0c,00,10 hdr 80
(II) PCI: 00:0c:3: chip 108e,1103 card 0000,0000 rev 01 class 0c,03,10 hdr 80
(II) PCI: 00:0d:0: chip 10b9,5229 card 0000,0000 rev c3 class 01,01,ff hdr 00
(II) PCI: 00:13:0: chip 1002,4752 card 0000,0000 rev 65 class 03,00,00 hdr 00
(II) PCI: 01:00:0: chip 3d3d,0009 card 1227,0006 rev 01 class 03,80,00 hdr 00
(II) PCI: 01:01:0: chip 3d3d,0009 card 1227,0006 rev 01 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 1 0x00000000 - 0x00ffffff (0x1000000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:5:0), (0,1,1), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 1 non-prefetchable memory range:
[0] -1 1 0x03000000 - 0x057fffff (0x2800000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(!!) More than one possible primary device found
(--) PCI: (0:3:0) ALi Corporation M7101 PMU rev 0
(--) PCI: (0:19:0) ATI Technologies Inc Rage XL rev 101, Mem @ 0x06000000/24, 0x00426000/12, I/O @ 0x0b00/8, BIOS @ 0x00440000/17
(--) PCI: (1:0:0) 3DLabs Permedia II 2D+3D rev 1, Mem @ 0x03000000/17, 0x03800000/23, 0x04000000/23, BIOS @ 0x03020000/16
(--) PCI: (1:1:0) 3DLabs Permedia II 2D+3D rev 1, Mem @ 0x03040000/17, 0x04800000/23, 0x05000000/23, BIOS @ 0x03030000/16
(II) Addressable bus resource ranges are
[0] -1 1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 1 0x00000000 - 0x00ffffff (0x1000000) IX[B]
(II) OS-reported resource ranges:
[0] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
[5] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
(II) Active PCI resource ranges:
[0] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
[1] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
[2] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
[3] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
[4] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
[5] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
[6] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
[7] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
[8] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
[9] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
[10] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
[11] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
[12] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
[13] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
[14] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
[15] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
[16] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
[17] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[18] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
[19] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
[20] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
[21] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
[22] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
[23] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
[24] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
[1] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
[2] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
[3] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
[4] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
[5] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
[6] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
[7] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
[8] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
[9] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
[10] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
[11] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
[12] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
[13] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
[14] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
[15] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
[16] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
[17] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[18] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
[19] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
[20] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
[21] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
[22] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
[23] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
[24] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
[5] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
(II) All system resource ranges:
[0] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
[5] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
[6] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
[7] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
[8] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
[9] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
[10] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
[11] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
[12] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
[13] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
[14] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
[15] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
[16] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
[17] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
[18] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
[19] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
[20] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
[21] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[22] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
[23] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
[24] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
[25] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
[26] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
[27] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
[28] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
[29] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
[30] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
(II) SUNFFB: driver for Creator, Creator 3D and Elite 3D
(II) SUNLEO: driver for Leo (ZX)
(II) SUNCG6: driver for CGsix (GX and Turbo GX)
(II) SUNCG3: driver for CGthree
(II) SUNCG14: driver for CG14
(II) SUNTCX: driver for TCX
(II) SUNBW2: driver for BWtwo
(II) GLINT: driver for 3Dlabs chipsets: gamma, gamma2, ti_pm2, ti_pm, r4,
pm4, pm3, pm2v, pm2, pm, 300sx, 500tx, mx, delta
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400,
mgag550
(II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee,
3dfx Voodoo3, 3dfx Voodoo5
(II) ATI: ATI driver (version 6.4.18) for chipset: ati
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (AGP?), ATI Rage 128 Pro GL PB (AGP?),
ATI Rage 128 Pro GL PC (AGP?), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (AGP?), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (AGP?), ATI Rage 128 Pro VR PH (AGP?),
ATI Rage 128 Pro VR PI (AGP?), ATI Rage 128 Pro VR PJ (AGP?),
ATI Rage 128 Pro VR PK (AGP?), ATI Rage 128 Pro VR PL (AGP?),
ATI Rage 128 Pro VR PM (AGP?), ATI Rage 128 Pro VR PN (AGP?),
ATI Rage 128 Pro VR PO (AGP?), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (AGP?), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP), ATI Radeon VE/7000 QZ (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QI (AGP),
ATI Radeon 8500 QJ (AGP), ATI Radeon 8500 QK (AGP),
ATI Radeon 8500 QL (AGP), ATI Radeon 9100 QM (AGP),
ATI Radeon 8500 QN (AGP), ATI Radeon 8500 QO (AGP),
ATI Radeon 8500 Qh (AGP), ATI Radeon 8500 Qi (AGP),
ATI Radeon 8500 Qj (AGP), ATI Radeon 8500 Qk (AGP),
ATI Radeon 8500 Ql (AGP), ATI Radeon 8500 BB (AGP),
ATI Radeon 7500 QW (AGP), ATI Radeon 7500 QX (AGP),
ATI Radeon 9000 Id (AGP), ATI Radeon 9000 Ie (AGP),
ATI Radeon 9000 If (AGP), ATI Radeon 9000 Ig (AGP),
ATI Radeon Mobility M9 Ld (AGP), ATI Radeon Mobility M9 Le (AGP),
ATI Radeon Mobility M9 Lf (AGP), ATI Radeon Mobility M9 Lg (AGP),
ATI Radeon 9200 5960 (AGP), ATI Radeon 9200 5961 (AGP),
ATI Radeon 9200 5962 (AGP), ATI Radeon 9200 5963 (AGP),
ATI Radeon M9+ 5968 (AGP), ATI Radeon M9+ 5969 (AGP),
ATI Radeon M9+ 596A (AGP), ATI Radeon M9+ 596B (AGP),
ATI Radeon 9500 AD (AGP), ATI Radeon 9500 AE (AGP),
ATI Radeon 9500 AF (AGP), ATI FireGL Z1/X1 AG (AGP),
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9700 NF (AGP), ATI FireGL X1 NG (AGP)
(II) VESA: driver for VESA chipsets: vesa
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(II) FBDEV: driver for framebuffer: fbdev
(II) v4l driver for Video4Linux
(II) APM: driver for the Alliance chipsets: AP6422, AT24, AT3D
(II) ARK: driver (version 0.5.0 for ARK Logic chipset: ark1000pv,
ark2000pv, ark2000mt
(II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525,
ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550,
ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300
(II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8,
CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD,
CL-GD5465, CL-GD7548
(II) I128: driver for Number Nine I128 chipsets: i128, i128v2, i128t2r,
i128t2r4
(II) I740: Driver for Intel i740 chipset: i740 (agp), i740 (pci)
(II) IMSTT: driver (version 1.0.0) for IMS TwinTurbo chipsets : imstt128,
imstt3d
(II) NEOMAGIC: Driver for Neomagic chipsets: neo2070, neo2090, neo2093,
neo2097, neo2160, neo2200, neo2230, neo2360, neo2380
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2, Vanta,
RIVA TNT2 Ultra, RIVA TNT2 Model 64, Aladdin TNT2, GeForce 256,
GeForce DDR, Quadro, GeForce2 MX/MX 400, GeForce2 MX 100/200,
GeForce2 Go, Quadro2 MXR/EX/Go, GeForce2 Integrated GPU,
GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra, Quadro2 Pro,
GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, GeForce4 440 Go 64M,
GeForce4 410 Go 16M, Quadro4 500 GoGL, Quadro4 550 XGL, Quadro4 NVS,
GeForce4 MX 440 with AGP8X, GeForce4 MX 440SE with AGP8X,
GeForce4 MX 420 with AGP8X, GeForce4 448 Go, GeForce4 488 Go,
Quadro4 580 XGL, Quadro4 280 NVS, Quadro4 380 XGL,
GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, 0x0300, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, 0x0316, 0x0317, 0x0318,
0x0319, 0x031A, 0x031B, 0x031C, 0x031D, 0x031E, 0x031F,
GeForce FX 5200 Ultra, GeForce FX 5200, 0x0323, GeForce FX Go5200,
GeForce FX Go5250, 0x032A, Quadro FX 500, 0x032C, 0x032D, 0x032F
(II) RENDITION: rendition driver (version 4.0) for chipsets: V1000,
V2100/V2200
(II) S3VIRGE: driver (version 1.8.6) for S3 ViRGE chipsets: virge, 86C325,
virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
trio 3d/2x, 86C362, 86C368
(II) SAVAGE: driver (version 1.1.27t) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
ProSavage PN133, ProSavage KN133, SuperSavage/MX 128,
SuperSavage/MX 64, SuperSavage/MX 64C, SuperSavage/IX 128,
SuperSavage/IX 128, SuperSavage/IX 64, SuperSavage/IX 64,
SuperSavage/IXC 64, SuperSavage/IXC 64, ProSavage DDR,
ProSavage DDR-K
(II) Silicon Motion: driver (version 1.3.1) for Silicon Motion Lynx chipsets:
Lynx, LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM
(II) TRIDENT: driver for Trident chipsets: tvga9000, tvga9000i, tvga8900c,
tvga8900d, tvga9200cxr, tgui9400cxi, cyber9320, cyber9388, cyber9397,
cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4, tgui9420dgi,
tgui9440agi, tgui9660, tgui9680, providia9682, providia9685,
cyber9382, cyber9385, 3dimage975, 3dimage985, blade3d, cyberbladei7,
cyberbladei7d, cyberbladei1, cyberbladei1d, cyberbladeAi1,
cyberbladeAi1d, bladeXP, cyberbladeXPAi1
(II) DUMMY: Driver for Dummy chipsets: dummy
(II) Primary Device is:
(--) Chipset pm2v found
(--) Chipset pm2v found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
[5] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
[6] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
[7] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
[8] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
[9] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
[10] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
[11] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
[12] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
[13] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
[14] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
[15] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
[16] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
[17] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
[18] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
[19] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
[20] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
[21] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[22] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
[23] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
[24] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
[25] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
[26] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
[27] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
[28] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
[29] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
[30] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
[5] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
[6] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
[7] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
[8] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
[9] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
[10] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
[11] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
[12] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
[13] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
[14] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
[15] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
[16] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
[17] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
[18] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
[19] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
[20] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
[21] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[22] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
[23] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
[24] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
[25] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
[26] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
[27] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
[28] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
[29] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
[30] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
(II) resource ranges after probing:
[0] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
[5] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
[6] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
[7] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
[8] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
[9] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
[10] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
[11] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
[12] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
[13] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
[14] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
[15] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
[16] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
[17] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
[18] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
[19] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
[20] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
[21] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[22] 0 1 0x000a0000 - 0x000affff (0x10000) MS[B]
[23] 0 1 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[24] 0 1 0x000b8000 - 0x000bffff (0x8000) MS[B]
[25] 1 1 0x000a0000 - 0x000affff (0x10000) MS[B]
[26] 1 1 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[27] 1 1 0x000b8000 - 0x000bffff (0x8000) MS[B]
[28] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
[29] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
[30] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
[31] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
[32] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
[33] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
[34] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
[35] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
[36] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
[37] 0 1 0x000003b0 - 0x000003bb (0xc) IS[B]
[38] 0 1 0x000003c0 - 0x000003df (0x20) IS[B]
[39] 1 1 0x000003b0 - 0x000003bb (0xc) IS[B]
[40] 1 1 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Setting vga for screen 1.
(**) GLINT(0): Depth 24, (--) framebuffer bpp 32
(==) GLINT(0): RGB weight 888
(==) GLINT(0): Default visual is TrueColor
(==) GLINT(0): Using gamma correction (1.0, 1.0, 1.0)
(==) GLINT(0): Using HW cursor
(--) GLINT(0): Not using Linux framebuffer device
(--) GLINT(0): Chipset: "pm2v"
(--) GLINT(0): Linear framebuffer at 0x4000000
(--) GLINT(0): MMIO registers at 0x3010000
(II) GLINT(0): Initializing int10
(II) Multi Device Card detected: [1:0:0][1:1:0]
(EE) GLINT(0): Cannot read V_BIOS (5)
(--) GLINT(0): VideoRAM: 8192 kByte
(--) GLINT(0): FIFO Size is 256 DWORDS
(==) GLINT(0): Min pixel clock is 16 MHz
(--) GLINT(0): Max pixel clock is 110 MHz
(II) GLINT(0): Sun: Using hsync range of 30.00-82.00 kHz
(II) GLINT(0): Sun: Using vrefresh range of 50.00-120.00 Hz
(II) GLINT(0): Clock range: 16.25 to 110.00 MHz
(II) GLINT(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(--) GLINT(0): Virtual size is 1280x1024 (pitch 1280)
(**) GLINT(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) GLINT(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) GLINT(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) GLINT(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
(**) GLINT(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) GLINT(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
(**) GLINT(0): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) GLINT(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
(**) GLINT(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) GLINT(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) GLINT(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) GLINT(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) GLINT(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) GLINT(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) GLINT(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) GLINT(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) GLINT(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) GLINT(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) GLINT(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) GLINT(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) GLINT(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) GLINT(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) GLINT(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) GLINT(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) GLINT(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) GLINT(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) GLINT(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) GLINT(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) GLINT(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) GLINT(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) GLINT(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) GLINT(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) GLINT(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) GLINT(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) GLINT(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) GLINT(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) GLINT(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) GLINT(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) GLINT(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) GLINT(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) GLINT(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) GLINT(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(++) GLINT(0): DPI set to (100, 100)
(II) GLINT(0): I2C bus "DDC" initialized.
(II) GLINT(0): I2C bus "Video" initialized.
(**) GLINT(1): Depth 24, (--) framebuffer bpp 32
(==) GLINT(1): RGB weight 888
(==) GLINT(1): Default visual is TrueColor
(==) GLINT(1): Using gamma correction (1.0, 1.0, 1.0)
(==) GLINT(1): Using HW cursor
(--) GLINT(1): Not using Linux framebuffer device
(--) GLINT(1): Chipset: "pm2v"
(--) GLINT(1): Linear framebuffer at 0x5000000
(--) GLINT(1): MMIO registers at 0x3050000
(II) GLINT(1): Initializing int10
(II) Multi Device Card detected: [1:0:0][1:1:0]
(EE) GLINT(1): Cannot read V_BIOS (5)
(--) GLINT(1): VideoRAM: 4096 kByte
(--) GLINT(1): FIFO Size is 256 DWORDS
(==) GLINT(1): Min pixel clock is 16 MHz
(--) GLINT(1): Max pixel clock is 110 MHz
(II) GLINT(1): Sun2: Using hsync range of 30.00-82.00 kHz
(II) GLINT(1): Sun2: Using vrefresh range of 50.00-120.00 Hz
(II) GLINT(1): Clock range: 16.25 to 110.00 MHz
(II) GLINT(1): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1280x960" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1280x960" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1280x1024" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1280x1024" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1280x1024" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1600x1200" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1600x1200" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1600x1200" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1600x1200" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1600x1200" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1792x1344" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1792x1344" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1856x1392" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1856x1392" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1920x1440" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1920x1440" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1400x1050" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1400x1050" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1600x1024" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1920x1440" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "2048x1536" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "2048x1536" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "2048x1536" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using mode "1280x1024" (no mode of this name)
(--) GLINT(1): Virtual size is 1152x864 (pitch 1152)
(**) GLINT(1): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) GLINT(1): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
(**) GLINT(1): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) GLINT(1): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
(**) GLINT(1): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) GLINT(1): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) GLINT(1): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) GLINT(1): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) GLINT(1): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) GLINT(1): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) GLINT(1): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) GLINT(1): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) GLINT(1): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) GLINT(1): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) GLINT(1): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) GLINT(1): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) GLINT(1): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) GLINT(1): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) GLINT(1): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) GLINT(1): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) GLINT(1): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) GLINT(1): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) GLINT(1): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) GLINT(1): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) GLINT(1): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) GLINT(1): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) GLINT(1): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) GLINT(1): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) GLINT(1): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) GLINT(1): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) GLINT(1): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) GLINT(1): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) GLINT(1): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) GLINT(1): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) GLINT(1): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) GLINT(1): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) GLINT(1): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) GLINT(1): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(++) GLINT(1): DPI set to (100, 100)
(II) GLINT(1): I2C bus "DDC" initialized.
(II) GLINT(1): I2C bus "Video" initialized.
(--) Depth 24 pixmap format is 32 bpp
(II) resource ranges after preInit:
[0] 1 1 0x05000000 - 0x057fffff (0x800000) MX[B]
[1] 1 1 0x04800000 - 0x04ffffff (0x800000) MX[B]
[2] 1 1 0x03040000 - 0x0305ffff (0x20000) MX[B]
[3] 0 1 0x04000000 - 0x047fffff (0x800000) MX[B]
[4] 0 1 0x03800000 - 0x03ffffff (0x800000) MX[B]
[5] 0 1 0x03000000 - 0x0301ffff (0x20000) MX[B]
[6] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
[7] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[8] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[9] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[10] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
[11] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
[12] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
[13] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
[14] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
[15] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
[16] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
[17] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
[18] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
[19] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
[20] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
[21] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
[22] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
[23] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
[24] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
[25] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
[26] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
[27] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[28] 0 1 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[29] 0 1 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[30] 0 1 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[31] 1 1 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[32] 1 1 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[33] 1 1 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[34] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
[35] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
[36] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
[37] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
[38] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
[39] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
[40] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
[41] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
[42] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
[43] 0 1 0x000003b0 - 0x000003bb (0xc) IS[B](OprD)
[44] 0 1 0x000003c0 - 0x000003df (0x20) IS[B](OprD)
[45] 1 1 0x000003b0 - 0x000003bb (0xc) IS[B](OprD)
[46] 1 1 0x000003c0 - 0x000003df (0x20) IS[B](OprD)
(II) GLINT(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) GLINT(0): I2C device "DDC:ddc2" removed.
(II) GLINT(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Offscreen Pixmaps
Driver provided WriteBitmap replacement
Driver provided WritePixmap replacement
Setting up tile and stipple cache:
20 128x128 slots
5 256x256 slots
(==) GLINT(0): Backing store disabled
(==) GLINT(0): Silken mouse enabled
(**) Option "dpms"
(**) GLINT(0): DPMS enabled
(II) GLINT(0): direct rendering disabled
(II) GLINT(0): Initializing Xv driver rev. 4
(II) GLINT(0): Xv frontend scaler enabled
(==) RandR enabled
(II) GLINT(1): I2C device "DDC:ddc2" registered at address 0xA0.
(II) GLINT(1): I2C device "DDC:ddc2" removed.
(II) GLINT(1): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Offscreen Pixmaps
Driver provided WriteBitmap replacement
Driver provided WritePixmap replacement
Setting up tile and stipple cache:
9 128x46 slots
(==) GLINT(1): Backing store disabled
(==) GLINT(1): Silken mouse enabled
(**) Option "dpms"
(**) GLINT(1): DPMS enabled
(II) GLINT(1): direct rendering disabled
(II) GLINT(1): Initializing Xv driver rev. 4
(II) GLINT(1): Xv frontend scaler enabled
(==) RandR enabled
(II) Entity 0 shares no resources
(II) Entity 1 shares no resources
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(==) Configured Mouse: Buttons: 3
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) Server_Terminate keybinding not found
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element unix/:7100, removing from list!
(II) Screen 0 shares mem & io resources
(II) Screen 1 shares mem & io resources
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Screen 0 shares mem & io resources
(II) Screen 1 shares mem & io resources
(II) Screen 0 shares mem & io resources
(II) Screen 1 shares mem & io resources
(II) Entity 0 shares no resources
(II) Entity 1 shares no resources
(II) Configured Mouse: ps2EnableDataReporting: succeeded
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Bug#226973: xserver-xfree86: [glint] second card at wrong resolution
2004-01-14 21:06 ` Clint Adams
@ 2004-01-14 21:12 ` Sven Luther
2004-01-14 21:17 ` Clint Adams
0 siblings, 1 reply; 19+ messages in thread
From: Sven Luther @ 2004-01-14 21:12 UTC (permalink / raw
To: Clint Adams; +Cc: Sven Luther, 226973, linux-fbdev-devel
On Wed, Jan 14, 2004 at 04:06:35PM -0500, Clint Adams wrote:
> > Yep. It probably doesn't happen on x86, since the int10 stuff
> > initializes the card with the onboard bios. Using a x86 emulator in X to
> > run this bios might be a solution.
>
> According to Tech-Source, this card has no VGA bios..
Ok. An OF driver then ?
> > Ho. definitively some registers who are bad. It has been a long time
> > since i have looked at the pm2 specs (kind of 98ish i think) though.
> > Maybe you could get hand of the free TI-pm2 specs and look for yourself ?
>
> I've been looking and not finding anything.
you did not find the specs, or you didn't find anything ?
> > You would dump all the possible registers, and see which one is
> > different. Enabling debugging in the glint driver would also do. You can
> > safely run no-accel on these for the tests, as this is definitively not
> > an accel issue, but a video out/ramdac one.
>
> Attached is the XFree86.0.log from xserver-xfree86-dbg. I'll start it
> again with noaccel. The only thing I notice is that it thinks the
> second card only has 4 megs of video ram.
Nope, this is not the right way, you have to rebuild the driver and add
some code to drop the content of the registers somewhere.
I don't have time right now, maybe later i will find time to send you a
register dropping patch or something.
Friendly,
Sven Luther
-------------------------------------------------------
This SF.net email is sponsored by: Perforce Software.
Perforce is the Fast Software Configuration Management System offering
advanced branching capabilities and atomic changes on 50+ platforms.
Free Eval! http://www.perforce.com/perforce/loadprog.html
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Bug#226973: xserver-xfree86: [glint] second card at wrong resolution
2004-01-13 16:02 ` Sven Luther
2004-01-14 21:06 ` Clint Adams
@ 2004-01-14 21:12 ` Clint Adams
2004-01-14 21:16 ` Sven Luther
1 sibling, 1 reply; 19+ messages in thread
From: Clint Adams @ 2004-01-14 21:12 UTC (permalink / raw
To: Sven Luther; +Cc: 226973, linux-fbdev-devel
[-- Attachment #1: Type: text/plain, Size: 290 bytes --]
> You would dump all the possible registers, and see which one is
> different. Enabling debugging in the glint driver would also do. You can
> safely run no-accel on these for the tests, as this is definitively not
> an accel issue, but a video out/ramdac one.
Here's the NoAccel version.
[-- Attachment #2: XFree86.0.log --]
[-- Type: text/plain, Size: 46149 bytes --]
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).
XFree86 Version 4.3.0.1 (Debian (static) 4.3.0-0pre1v3 20030929061855 ilmari@ilmari.org)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.18 sparc [ELF]
Build Date: 29 September 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
OS Kernel: Linux version 2.4.24 (clint@rashudo) (gcc version 3.3.3 20031229 (prerelease) (Debian)) #1 Mon Jan 12 14:44:22 EST 2004
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Jan 14 16:07:29 2004
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Sun"
(**) | |-->Device "TSI Raptor GFX 8P"
(**) |-->Screen "Screen Two" (1)
(**) | |-->Monitor "Sun2"
(**) | |-->Device "TSI Raptor GFX 8P 2"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(WW) The directory "/usr/lib/X11/fonts/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID".
Entry deleted from font path.
(Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID").
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(++) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 108e,a001 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:03:0: chip 10b9,7101 card 0000,0000 rev 00 class 00,00,00 hdr 00
(II) PCI: 00:05:0: chip 1011,0024 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 10b9,1533 card 10b9,1533 rev 00 class 06,01,00 hdr 00
(II) PCI: 00:08:0: chip 10b9,5451 card 10b9,5451 rev 01 class 04,01,00 hdr 00
(II) PCI: 00:0c:0: chip 108e,1100 card 0000,0000 rev 01 class 06,80,00 hdr 80
(II) PCI: 00:0c:1: chip 108e,1101 card 0000,0000 rev 01 class 02,00,00 hdr 80
(II) PCI: 00:0c:2: chip 108e,1102 card 0000,0000 rev 01 class 0c,00,10 hdr 80
(II) PCI: 00:0c:3: chip 108e,1103 card 0000,0000 rev 01 class 0c,03,10 hdr 80
(II) PCI: 00:0d:0: chip 10b9,5229 card 0000,0000 rev c3 class 01,01,ff hdr 00
(II) PCI: 00:13:0: chip 1002,4752 card 0000,0000 rev 65 class 03,00,00 hdr 00
(II) PCI: 01:00:0: chip 3d3d,0009 card 1227,0006 rev 01 class 03,80,00 hdr 00
(II) PCI: 01:01:0: chip 3d3d,0009 card 1227,0006 rev 01 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 1 0x00000000 - 0x00ffffff (0x1000000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:5:0), (0,1,1), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 1 non-prefetchable memory range:
[0] -1 1 0x03000000 - 0x057fffff (0x2800000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(!!) More than one possible primary device found
(--) PCI: (0:3:0) ALi Corporation M7101 PMU rev 0
(--) PCI: (0:19:0) ATI Technologies Inc Rage XL rev 101, Mem @ 0x06000000/24, 0x00426000/12, I/O @ 0x0b00/8, BIOS @ 0x00440000/17
(--) PCI: (1:0:0) 3DLabs Permedia II 2D+3D rev 1, Mem @ 0x03000000/17, 0x03800000/23, 0x04000000/23, BIOS @ 0x03020000/16
(--) PCI: (1:1:0) 3DLabs Permedia II 2D+3D rev 1, Mem @ 0x03040000/17, 0x04800000/23, 0x05000000/23, BIOS @ 0x03030000/16
(II) Addressable bus resource ranges are
[0] -1 1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 1 0x00000000 - 0x00ffffff (0x1000000) IX[B]
(II) OS-reported resource ranges:
[0] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
[5] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
(II) Active PCI resource ranges:
[0] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
[1] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
[2] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
[3] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
[4] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
[5] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
[6] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
[7] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
[8] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
[9] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
[10] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
[11] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
[12] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
[13] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
[14] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
[15] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
[16] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
[17] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[18] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
[19] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
[20] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
[21] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
[22] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
[23] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
[24] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
[1] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
[2] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
[3] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
[4] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
[5] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
[6] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
[7] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
[8] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
[9] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
[10] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
[11] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
[12] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
[13] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
[14] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
[15] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
[16] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
[17] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[18] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
[19] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
[20] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
[21] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
[22] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
[23] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
[24] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
[5] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
(II) All system resource ranges:
[0] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
[5] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
[6] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
[7] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
[8] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
[9] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
[10] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
[11] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
[12] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
[13] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
[14] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
[15] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
[16] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
[17] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
[18] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
[19] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
[20] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
[21] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[22] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
[23] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
[24] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
[25] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
[26] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
[27] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
[28] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
[29] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
[30] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
(II) SUNFFB: driver for Creator, Creator 3D and Elite 3D
(II) SUNLEO: driver for Leo (ZX)
(II) SUNCG6: driver for CGsix (GX and Turbo GX)
(II) SUNCG3: driver for CGthree
(II) SUNCG14: driver for CG14
(II) SUNTCX: driver for TCX
(II) SUNBW2: driver for BWtwo
(II) GLINT: driver for 3Dlabs chipsets: gamma, gamma2, ti_pm2, ti_pm, r4,
pm4, pm3, pm2v, pm2, pm, 300sx, 500tx, mx, delta
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400,
mgag550
(II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee,
3dfx Voodoo3, 3dfx Voodoo5
(II) ATI: ATI driver (version 6.4.18) for chipset: ati
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (AGP?), ATI Rage 128 Pro GL PB (AGP?),
ATI Rage 128 Pro GL PC (AGP?), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (AGP?), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (AGP?), ATI Rage 128 Pro VR PH (AGP?),
ATI Rage 128 Pro VR PI (AGP?), ATI Rage 128 Pro VR PJ (AGP?),
ATI Rage 128 Pro VR PK (AGP?), ATI Rage 128 Pro VR PL (AGP?),
ATI Rage 128 Pro VR PM (AGP?), ATI Rage 128 Pro VR PN (AGP?),
ATI Rage 128 Pro VR PO (AGP?), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (AGP?), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP), ATI Radeon VE/7000 QZ (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QI (AGP),
ATI Radeon 8500 QJ (AGP), ATI Radeon 8500 QK (AGP),
ATI Radeon 8500 QL (AGP), ATI Radeon 9100 QM (AGP),
ATI Radeon 8500 QN (AGP), ATI Radeon 8500 QO (AGP),
ATI Radeon 8500 Qh (AGP), ATI Radeon 8500 Qi (AGP),
ATI Radeon 8500 Qj (AGP), ATI Radeon 8500 Qk (AGP),
ATI Radeon 8500 Ql (AGP), ATI Radeon 8500 BB (AGP),
ATI Radeon 7500 QW (AGP), ATI Radeon 7500 QX (AGP),
ATI Radeon 9000 Id (AGP), ATI Radeon 9000 Ie (AGP),
ATI Radeon 9000 If (AGP), ATI Radeon 9000 Ig (AGP),
ATI Radeon Mobility M9 Ld (AGP), ATI Radeon Mobility M9 Le (AGP),
ATI Radeon Mobility M9 Lf (AGP), ATI Radeon Mobility M9 Lg (AGP),
ATI Radeon 9200 5960 (AGP), ATI Radeon 9200 5961 (AGP),
ATI Radeon 9200 5962 (AGP), ATI Radeon 9200 5963 (AGP),
ATI Radeon M9+ 5968 (AGP), ATI Radeon M9+ 5969 (AGP),
ATI Radeon M9+ 596A (AGP), ATI Radeon M9+ 596B (AGP),
ATI Radeon 9500 AD (AGP), ATI Radeon 9500 AE (AGP),
ATI Radeon 9500 AF (AGP), ATI FireGL Z1/X1 AG (AGP),
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9700 NF (AGP), ATI FireGL X1 NG (AGP)
(II) VESA: driver for VESA chipsets: vesa
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(II) FBDEV: driver for framebuffer: fbdev
(II) v4l driver for Video4Linux
(II) APM: driver for the Alliance chipsets: AP6422, AT24, AT3D
(II) ARK: driver (version 0.5.0 for ARK Logic chipset: ark1000pv,
ark2000pv, ark2000mt
(II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525,
ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550,
ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300
(II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8,
CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD,
CL-GD5465, CL-GD7548
(II) I128: driver for Number Nine I128 chipsets: i128, i128v2, i128t2r,
i128t2r4
(II) I740: Driver for Intel i740 chipset: i740 (agp), i740 (pci)
(II) IMSTT: driver (version 1.0.0) for IMS TwinTurbo chipsets : imstt128,
imstt3d
(II) NEOMAGIC: Driver for Neomagic chipsets: neo2070, neo2090, neo2093,
neo2097, neo2160, neo2200, neo2230, neo2360, neo2380
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2, Vanta,
RIVA TNT2 Ultra, RIVA TNT2 Model 64, Aladdin TNT2, GeForce 256,
GeForce DDR, Quadro, GeForce2 MX/MX 400, GeForce2 MX 100/200,
GeForce2 Go, Quadro2 MXR/EX/Go, GeForce2 Integrated GPU,
GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra, Quadro2 Pro,
GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, GeForce4 440 Go 64M,
GeForce4 410 Go 16M, Quadro4 500 GoGL, Quadro4 550 XGL, Quadro4 NVS,
GeForce4 MX 440 with AGP8X, GeForce4 MX 440SE with AGP8X,
GeForce4 MX 420 with AGP8X, GeForce4 448 Go, GeForce4 488 Go,
Quadro4 580 XGL, Quadro4 280 NVS, Quadro4 380 XGL,
GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, 0x0300, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, 0x0316, 0x0317, 0x0318,
0x0319, 0x031A, 0x031B, 0x031C, 0x031D, 0x031E, 0x031F,
GeForce FX 5200 Ultra, GeForce FX 5200, 0x0323, GeForce FX Go5200,
GeForce FX Go5250, 0x032A, Quadro FX 500, 0x032C, 0x032D, 0x032F
(II) RENDITION: rendition driver (version 4.0) for chipsets: V1000,
V2100/V2200
(II) S3VIRGE: driver (version 1.8.6) for S3 ViRGE chipsets: virge, 86C325,
virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
trio 3d/2x, 86C362, 86C368
(II) SAVAGE: driver (version 1.1.27t) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
ProSavage PN133, ProSavage KN133, SuperSavage/MX 128,
SuperSavage/MX 64, SuperSavage/MX 64C, SuperSavage/IX 128,
SuperSavage/IX 128, SuperSavage/IX 64, SuperSavage/IX 64,
SuperSavage/IXC 64, SuperSavage/IXC 64, ProSavage DDR,
ProSavage DDR-K
(II) Silicon Motion: driver (version 1.3.1) for Silicon Motion Lynx chipsets:
Lynx, LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM
(II) TRIDENT: driver for Trident chipsets: tvga9000, tvga9000i, tvga8900c,
tvga8900d, tvga9200cxr, tgui9400cxi, cyber9320, cyber9388, cyber9397,
cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4, tgui9420dgi,
tgui9440agi, tgui9660, tgui9680, providia9682, providia9685,
cyber9382, cyber9385, 3dimage975, 3dimage985, blade3d, cyberbladei7,
cyberbladei7d, cyberbladei1, cyberbladei1d, cyberbladeAi1,
cyberbladeAi1d, bladeXP, cyberbladeXPAi1
(II) DUMMY: Driver for Dummy chipsets: dummy
(II) Primary Device is:
(--) Chipset pm2v found
(--) Chipset pm2v found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
[5] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
[6] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
[7] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
[8] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
[9] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
[10] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
[11] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
[12] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
[13] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
[14] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
[15] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
[16] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
[17] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
[18] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
[19] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
[20] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
[21] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[22] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
[23] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
[24] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
[25] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
[26] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
[27] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
[28] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
[29] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
[30] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
[5] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
[6] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
[7] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
[8] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
[9] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
[10] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
[11] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
[12] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
[13] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
[14] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
[15] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
[16] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
[17] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
[18] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
[19] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
[20] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
[21] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[22] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
[23] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
[24] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
[25] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
[26] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
[27] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
[28] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
[29] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
[30] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
(II) resource ranges after probing:
[0] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
[5] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
[6] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
[7] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
[8] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
[9] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
[10] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
[11] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
[12] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
[13] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
[14] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
[15] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
[16] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
[17] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
[18] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
[19] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
[20] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
[21] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[22] 0 1 0x000a0000 - 0x000affff (0x10000) MS[B]
[23] 0 1 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[24] 0 1 0x000b8000 - 0x000bffff (0x8000) MS[B]
[25] 1 1 0x000a0000 - 0x000affff (0x10000) MS[B]
[26] 1 1 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[27] 1 1 0x000b8000 - 0x000bffff (0x8000) MS[B]
[28] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
[29] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
[30] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
[31] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
[32] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
[33] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
[34] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
[35] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
[36] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
[37] 0 1 0x000003b0 - 0x000003bb (0xc) IS[B]
[38] 0 1 0x000003c0 - 0x000003df (0x20) IS[B]
[39] 1 1 0x000003b0 - 0x000003bb (0xc) IS[B]
[40] 1 1 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Setting vga for screen 1.
(**) GLINT(0): Depth 24, (--) framebuffer bpp 32
(==) GLINT(0): RGB weight 888
(==) GLINT(0): Default visual is TrueColor
(==) GLINT(0): Using gamma correction (1.0, 1.0, 1.0)
(**) GLINT(0): Option "NoAccel"
(==) GLINT(0): Using HW cursor
(**) GLINT(0): Acceleration disabled
(--) GLINT(0): Not using Linux framebuffer device
(--) GLINT(0): Chipset: "pm2v"
(--) GLINT(0): Linear framebuffer at 0x4000000
(--) GLINT(0): MMIO registers at 0x3010000
(II) GLINT(0): Initializing int10
(II) Multi Device Card detected: [1:0:0][1:1:0]
(EE) GLINT(0): Cannot read V_BIOS (5)
(--) GLINT(0): VideoRAM: 8192 kByte
(--) GLINT(0): FIFO Size is 256 DWORDS
(==) GLINT(0): Min pixel clock is 16 MHz
(--) GLINT(0): Max pixel clock is 110 MHz
(II) GLINT(0): Sun: Using hsync range of 30.00-82.00 kHz
(II) GLINT(0): Sun: Using vrefresh range of 50.00-120.00 Hz
(II) GLINT(0): Clock range: 16.25 to 110.00 MHz
(II) GLINT(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(--) GLINT(0): Virtual size is 1280x1024 (pitch 1280)
(**) GLINT(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) GLINT(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) GLINT(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) GLINT(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
(**) GLINT(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) GLINT(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
(**) GLINT(0): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) GLINT(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
(**) GLINT(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) GLINT(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) GLINT(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) GLINT(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) GLINT(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) GLINT(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) GLINT(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) GLINT(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) GLINT(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) GLINT(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) GLINT(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) GLINT(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) GLINT(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) GLINT(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) GLINT(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) GLINT(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) GLINT(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) GLINT(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) GLINT(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) GLINT(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) GLINT(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) GLINT(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) GLINT(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) GLINT(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) GLINT(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) GLINT(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) GLINT(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) GLINT(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) GLINT(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) GLINT(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) GLINT(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) GLINT(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) GLINT(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) GLINT(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(++) GLINT(0): DPI set to (100, 100)
(II) GLINT(0): I2C bus "DDC" initialized.
(II) GLINT(0): I2C bus "Video" initialized.
(**) GLINT(1): Depth 24, (--) framebuffer bpp 32
(==) GLINT(1): RGB weight 888
(==) GLINT(1): Default visual is TrueColor
(==) GLINT(1): Using gamma correction (1.0, 1.0, 1.0)
(**) GLINT(1): Option "NoAccel"
(==) GLINT(1): Using HW cursor
(**) GLINT(1): Acceleration disabled
(--) GLINT(1): Not using Linux framebuffer device
(--) GLINT(1): Chipset: "pm2v"
(--) GLINT(1): Linear framebuffer at 0x5000000
(--) GLINT(1): MMIO registers at 0x3050000
(II) GLINT(1): Initializing int10
(II) Multi Device Card detected: [1:0:0][1:1:0]
(EE) GLINT(1): Cannot read V_BIOS (5)
(--) GLINT(1): VideoRAM: 4096 kByte
(--) GLINT(1): FIFO Size is 256 DWORDS
(==) GLINT(1): Min pixel clock is 16 MHz
(--) GLINT(1): Max pixel clock is 110 MHz
(II) GLINT(1): Sun2: Using hsync range of 30.00-82.00 kHz
(II) GLINT(1): Sun2: Using vrefresh range of 50.00-120.00 Hz
(II) GLINT(1): Clock range: 16.25 to 110.00 MHz
(II) GLINT(1): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1280x960" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1280x960" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1280x1024" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1280x1024" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1280x1024" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1600x1200" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1600x1200" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1600x1200" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1600x1200" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1600x1200" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1792x1344" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1792x1344" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1856x1392" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1856x1392" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1920x1440" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1920x1440" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1400x1050" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1400x1050" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1600x1024" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1920x1440" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "2048x1536" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "2048x1536" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "2048x1536" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using mode "1280x1024" (no mode of this name)
(--) GLINT(1): Virtual size is 1152x864 (pitch 1152)
(**) GLINT(1): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) GLINT(1): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
(**) GLINT(1): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) GLINT(1): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
(**) GLINT(1): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) GLINT(1): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) GLINT(1): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) GLINT(1): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) GLINT(1): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) GLINT(1): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) GLINT(1): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) GLINT(1): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) GLINT(1): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) GLINT(1): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) GLINT(1): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) GLINT(1): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) GLINT(1): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) GLINT(1): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) GLINT(1): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) GLINT(1): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) GLINT(1): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) GLINT(1): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) GLINT(1): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) GLINT(1): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) GLINT(1): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) GLINT(1): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) GLINT(1): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) GLINT(1): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) GLINT(1): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) GLINT(1): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) GLINT(1): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) GLINT(1): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) GLINT(1): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) GLINT(1): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) GLINT(1): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) GLINT(1): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) GLINT(1): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) GLINT(1): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(++) GLINT(1): DPI set to (100, 100)
(II) GLINT(1): I2C bus "DDC" initialized.
(II) GLINT(1): I2C bus "Video" initialized.
(--) Depth 24 pixmap format is 32 bpp
(II) resource ranges after preInit:
[0] 1 1 0x05000000 - 0x057fffff (0x800000) MX[B]
[1] 1 1 0x04800000 - 0x04ffffff (0x800000) MX[B]
[2] 1 1 0x03040000 - 0x0305ffff (0x20000) MX[B]
[3] 0 1 0x04000000 - 0x047fffff (0x800000) MX[B]
[4] 0 1 0x03800000 - 0x03ffffff (0x800000) MX[B]
[5] 0 1 0x03000000 - 0x0301ffff (0x20000) MX[B]
[6] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
[7] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[8] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[9] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[10] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
[11] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
[12] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
[13] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
[14] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
[15] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
[16] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
[17] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
[18] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
[19] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
[20] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
[21] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
[22] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
[23] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
[24] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
[25] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
[26] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
[27] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[28] 0 1 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[29] 0 1 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[30] 0 1 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[31] 1 1 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[32] 1 1 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[33] 1 1 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[34] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
[35] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
[36] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
[37] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
[38] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
[39] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
[40] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
[41] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
[42] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
[43] 0 1 0x000003b0 - 0x000003bb (0xc) IS[B](OprD)
[44] 0 1 0x000003c0 - 0x000003df (0x20) IS[B](OprD)
[45] 1 1 0x000003b0 - 0x000003bb (0xc) IS[B](OprD)
[46] 1 1 0x000003c0 - 0x000003df (0x20) IS[B](OprD)
(II) GLINT(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) GLINT(0): I2C device "DDC:ddc2" removed.
(==) GLINT(0): Backing store disabled
(==) GLINT(0): Silken mouse enabled
(**) Option "dpms"
(**) GLINT(0): DPMS enabled
(II) GLINT(0): direct rendering disabled
(==) RandR enabled
(II) GLINT(1): I2C device "DDC:ddc2" registered at address 0xA0.
(II) GLINT(1): I2C device "DDC:ddc2" removed.
(==) GLINT(1): Backing store disabled
(==) GLINT(1): Silken mouse enabled
(**) Option "dpms"
(**) GLINT(1): DPMS enabled
(II) GLINT(1): direct rendering disabled
(==) RandR enabled
(II) Entity 0 shares no resources
(II) Entity 1 shares no resources
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(==) Configured Mouse: Buttons: 3
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) Server_Terminate keybinding not found
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element unix/:7100, removing from list!
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Bug#226973: xserver-xfree86: [glint] second card at wrong resolution
2004-01-14 21:12 ` Clint Adams
@ 2004-01-14 21:16 ` Sven Luther
2004-01-15 21:55 ` Clint Adams
` (2 more replies)
0 siblings, 3 replies; 19+ messages in thread
From: Sven Luther @ 2004-01-14 21:16 UTC (permalink / raw
To: Clint Adams; +Cc: Sven Luther, 226973, linux-fbdev-devel
On Wed, Jan 14, 2004 at 04:12:46PM -0500, Clint Adams wrote:
> > You would dump all the possible registers, and see which one is
> > different. Enabling debugging in the glint driver would also do. You can
> > safely run no-accel on these for the tests, as this is definitively not
> > an accel issue, but a video out/ramdac one.
>
> Here's the NoAccel version.
This will not help, X things everything is ok, it is just the graphic
card output which is problematic. No way to find it in the log, you have
to look at the way the graphic output registers are programmed.
Look at the pm2_dac.c stuff.
Friendly,
Sven Luther
-------------------------------------------------------
This SF.net email is sponsored by: Perforce Software.
Perforce is the Fast Software Configuration Management System offering
advanced branching capabilities and atomic changes on 50+ platforms.
Free Eval! http://www.perforce.com/perforce/loadprog.html
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Bug#226973: xserver-xfree86: [glint] second card at wrong resolution
2004-01-14 21:12 ` Sven Luther
@ 2004-01-14 21:17 ` Clint Adams
0 siblings, 0 replies; 19+ messages in thread
From: Clint Adams @ 2004-01-14 21:17 UTC (permalink / raw
To: Sven Luther; +Cc: 226973, linux-fbdev-devel
> Ok. An OF driver then ?
I assume so.
> Nope, this is not the right way, you have to rebuild the driver and add
> some code to drop the content of the registers somewhere.
>
> I don't have time right now, maybe later i will find time to send you a
> register dropping patch or something.
Okay, I'll poke around. Thanks.
-------------------------------------------------------
This SF.net email is sponsored by: Perforce Software.
Perforce is the Fast Software Configuration Management System offering
advanced branching capabilities and atomic changes on 50+ platforms.
Free Eval! http://www.perforce.com/perforce/loadprog.html
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Bug#226973: xserver-xfree86: [glint] second card at wrong resolution
2004-01-14 21:16 ` Sven Luther
@ 2004-01-15 21:55 ` Clint Adams
2004-01-15 22:47 ` Clint Adams
2004-03-30 15:32 ` Clint Adams
2 siblings, 0 replies; 19+ messages in thread
From: Clint Adams @ 2004-01-15 21:55 UTC (permalink / raw
To: Sven Luther; +Cc: 226973, linux-fbdev-devel
> This will not help, X things everything is ok, it is just the graphic
> card output which is problematic. No way to find it in the log, you have
> to look at the way the graphic output registers are programmed.
>
> Look at the pm2_dac.c stuff.
Well, I haven't gotten as far as dumping the registers, but I came
across Permedia2VPreInit in pm2v_dac.c, and forced it to call
Permedia2VPreInitSecondary(pScrn) unconditionally.
I also changed a few things seemingly related to linux-kernel-headers to
get the thing to compile, and it improved the situation. Now there is a
mild amount of distortion and flicker. The really bad part is that if I
drag an open window, it will turn into a block of noise, somewhat
related to the colors of the root window. Also, X now detects 8 megs of
memory on that card.
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Bug#226973: xserver-xfree86: [glint] second card at wrong resolution
2004-01-14 21:16 ` Sven Luther
2004-01-15 21:55 ` Clint Adams
@ 2004-01-15 22:47 ` Clint Adams
2004-03-30 15:32 ` Clint Adams
2 siblings, 0 replies; 19+ messages in thread
From: Clint Adams @ 2004-01-15 22:47 UTC (permalink / raw
To: Sven Luther; +Cc: 226973, linux-fbdev-devel
[-- Attachment #1: Type: text/plain, Size: 408 bytes --]
> This will not help, X things everything is ok, it is just the graphic
> card output which is problematic. No way to find it in the log, you have
> to look at the way the graphic output registers are programmed.
Attached is XFree86.0.log after putting #define DEBUG 1 at the top of
pm2v_dac.c. For some reason this makes the right head usable, but the
left head is at the wrong resolution and distorted.
[-- Attachment #2: XFree86.0.log --]
[-- Type: text/plain, Size: 53641 bytes --]
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).
XFree86 Version 4.3.0.1 (Debian 4.3.0-0pre1v3 20030929061855 ilmari@ilmari.org)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.18 sparc [ELF]
Build Date: 29 September 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.4.24 (clint@rashudo) (gcc version 3.3.3 20031229 (prerelease) (Debian)) #1 Mon Jan 12 14:44:22 EST 2004
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Jan 15 17:41:20 2004
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Sun"
(**) | |-->Device "TSI Raptor GFX 8P"
(**) |-->Screen "Screen Two" (1)
(**) | |-->Monitor "Sun2"
(**) | |-->Device "TSI Raptor GFX 8P 2"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(WW) The directory "/usr/lib/X11/fonts/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID".
Entry deleted from font path.
(Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID").
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 108e,a001 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:03:0: chip 10b9,7101 card 0000,0000 rev 00 class 00,00,00 hdr 00
(II) PCI: 00:05:0: chip 1011,0024 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 10b9,1533 card 10b9,1533 rev 00 class 06,01,00 hdr 00
(II) PCI: 00:08:0: chip 10b9,5451 card 10b9,5451 rev 01 class 04,01,00 hdr 00
(II) PCI: 00:0c:0: chip 108e,1100 card 0000,0000 rev 01 class 06,80,00 hdr 80
(II) PCI: 00:0c:1: chip 108e,1101 card 0000,0000 rev 01 class 02,00,00 hdr 80
(II) PCI: 00:0c:2: chip 108e,1102 card 0000,0000 rev 01 class 0c,00,10 hdr 80
(II) PCI: 00:0c:3: chip 108e,1103 card 0000,0000 rev 01 class 0c,03,10 hdr 80
(II) PCI: 00:0d:0: chip 10b9,5229 card 0000,0000 rev c3 class 01,01,ff hdr 00
(II) PCI: 00:13:0: chip 1002,4752 card 0000,0000 rev 65 class 03,00,00 hdr 00
(II) PCI: 01:00:0: chip 3d3d,0009 card 1227,0006 rev 01 class 03,80,00 hdr 00
(II) PCI: 01:01:0: chip 3d3d,0009 card 1227,0006 rev 01 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 1 0x00000000 - 0x00ffffff (0x1000000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:5:0), (0,1,1), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 1 non-prefetchable memory range:
[0] -1 1 0x03000000 - 0x057fffff (0x2800000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(!!) More than one possible primary device found
(--) PCI: (0:3:0) ALi Corporation M7101 PMU rev 0
(--) PCI: (0:19:0) ATI Technologies Inc Rage XL rev 101, Mem @ 0x06000000/24, 0x00426000/12, I/O @ 0x0b00/8, BIOS @ 0x00440000/17
(--) PCI: (1:0:0) 3DLabs Permedia II 2D+3D rev 1, Mem @ 0x03000000/17, 0x03800000/23, 0x04000000/23, BIOS @ 0x03020000/16
(--) PCI: (1:1:0) 3DLabs Permedia II 2D+3D rev 1, Mem @ 0x03040000/17, 0x04800000/23, 0x05000000/23, BIOS @ 0x03030000/16
(II) Addressable bus resource ranges are
[0] -1 1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 1 0x00000000 - 0x00ffffff (0x1000000) IX[B]
(II) OS-reported resource ranges:
[0] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
[5] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
(II) Active PCI resource ranges:
[0] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
[1] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
[2] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
[3] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
[4] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
[5] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
[6] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
[7] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
[8] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
[9] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
[10] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
[11] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
[12] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
[13] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
[14] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
[15] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
[16] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
[17] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[18] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
[19] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
[20] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
[21] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
[22] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
[23] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
[24] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
[1] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
[2] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
[3] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
[4] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
[5] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
[6] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
[7] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
[8] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
[9] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
[10] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
[11] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
[12] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
[13] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
[14] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
[15] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
[16] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
[17] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[18] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
[19] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
[20] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
[21] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
[22] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
[23] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
[24] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
[5] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
(II) All system resource ranges:
[0] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
[5] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
[6] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
[7] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
[8] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
[9] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
[10] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
[11] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
[12] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
[13] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
[14] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
[15] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
[16] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
[17] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
[18] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
[19] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
[20] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
[21] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[22] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
[23] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
[24] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
[25] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
[26] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
[27] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
[28] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
[29] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
[30] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o": No symbols found
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "glint"
(II) Loading /usr/X11R6/lib/modules/drivers/glint_drv.o
(II) Module glint: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) GLINT: driver for 3Dlabs chipsets: gamma, gamma2, ti_pm2, ti_pm, r4,
pm4, pm3, pm2v, pm2, pm, 300sx, 500tx, mx, delta
(II) Primary Device is:
(--) Chipset pm2v found
(--) Chipset pm2v found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
[5] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
[6] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
[7] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
[8] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
[9] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
[10] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
[11] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
[12] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
[13] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
[14] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
[15] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
[16] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
[17] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
[18] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
[19] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
[20] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
[21] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[22] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
[23] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
[24] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
[25] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
[26] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
[27] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
[28] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
[29] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
[30] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
[5] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
[6] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
[7] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
[8] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
[9] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
[10] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
[11] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
[12] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
[13] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
[14] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
[15] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
[16] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
[17] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
[18] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
[19] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
[20] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
[21] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[22] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
[23] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
[24] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
[25] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
[26] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
[27] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
[28] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
[29] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
[30] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
(II) resource ranges after probing:
[0] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
[5] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
[6] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
[7] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
[8] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
[9] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
[10] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
[11] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
[12] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
[13] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
[14] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
[15] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
[16] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
[17] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
[18] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
[19] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
[20] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
[21] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[22] 0 1 0x000a0000 - 0x000affff (0x10000) MS[B]
[23] 0 1 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[24] 0 1 0x000b8000 - 0x000bffff (0x8000) MS[B]
[25] 1 1 0x000a0000 - 0x000affff (0x10000) MS[B]
[26] 1 1 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[27] 1 1 0x000b8000 - 0x000bffff (0x8000) MS[B]
[28] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
[29] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
[30] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
[31] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
[32] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
[33] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
[34] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
[35] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
[36] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
[37] 0 1 0x000003b0 - 0x000003bb (0xc) IS[B]
[38] 0 1 0x000003c0 - 0x000003df (0x20) IS[B]
[39] 1 1 0x000003b0 - 0x000003bb (0xc) IS[B]
[40] 1 1 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Setting vga for screen 1.
(**) GLINT(0): Depth 24, (--) framebuffer bpp 32
(==) GLINT(0): RGB weight 888
(==) GLINT(0): Default visual is TrueColor
(==) GLINT(0): Using gamma correction (1.0, 1.0, 1.0)
(==) GLINT(0): Using HW cursor
(--) GLINT(0): Not using Linux framebuffer device
(--) GLINT(0): Chipset: "pm2v"
(--) GLINT(0): Linear framebuffer at 0x4000000
(--) GLINT(0): MMIO registers at 0x3010000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/libint10.a
(II) GLINT(0): Initializing int10
(II) Multi Device Card detected: [1:0:0][1:1:0]
(EE) GLINT(0): Cannot read V_BIOS (5)
(II) GLINT(0): Appian Jeronimo Pro 4x8mb board detected and initialized.
[0x10c0] <- 0xe6002021 (pm2v_dac.c, 99)
[0x1080] <- 0x00000020 (pm2v_dac.c, 100)
(--) GLINT(0): VideoRAM: 2048 kByte
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(--) GLINT(0): FIFO Size is 256 DWORDS
(==) GLINT(0): Min pixel clock is 16 MHz
(--) GLINT(0): Max pixel clock is 110 MHz
(II) GLINT(0): Sun: Using hsync range of 30.00-82.00 kHz
(II) GLINT(0): Sun: Using vrefresh range of 50.00-120.00 Hz
(II) GLINT(0): Clock range: 16.25 to 110.00 MHz
(II) GLINT(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1152x864" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "896x672" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "896x672" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "928x696" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "928x696" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "960x720" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "960x720" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1152x768" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1600x1024" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "960x720" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) GLINT(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) GLINT(0): Not using mode "1280x1024" (no mode of this name)
(--) GLINT(0): Virtual size is 832x624 (pitch 832)
(**) GLINT(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) GLINT(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) GLINT(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) GLINT(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) GLINT(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) GLINT(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) GLINT(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) GLINT(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) GLINT(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) GLINT(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) GLINT(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) GLINT(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) GLINT(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) GLINT(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) GLINT(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) GLINT(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) GLINT(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) GLINT(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) GLINT(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) GLINT(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) GLINT(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) GLINT(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) GLINT(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) GLINT(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) GLINT(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) GLINT(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(++) GLINT(0): DPI set to (100, 100)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(II) GLINT(0): I2C bus "DDC" initialized.
(II) GLINT(0): I2C bus "Video" initialized.
(**) GLINT(1): Depth 24, (--) framebuffer bpp 32
(==) GLINT(1): RGB weight 888
(==) GLINT(1): Default visual is TrueColor
(==) GLINT(1): Using gamma correction (1.0, 1.0, 1.0)
(==) GLINT(1): Using HW cursor
(--) GLINT(1): Not using Linux framebuffer device
(--) GLINT(1): Chipset: "pm2v"
(--) GLINT(1): Linear framebuffer at 0x5000000
(--) GLINT(1): MMIO registers at 0x3050000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/libint10.a
(II) GLINT(1): Initializing int10
(II) Multi Device Card detected: [1:0:0][1:1:0]
(EE) GLINT(1): Cannot read V_BIOS (5)
(II) GLINT(1): Appian Jeronimo Pro 4x8mb board detected and initialized.
[0x10c0] <- 0xe6002021 (pm2v_dac.c, 99)
[0x1080] <- 0x00000020 (pm2v_dac.c, 100)
(--) GLINT(1): VideoRAM: 8192 kByte
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Reloading /usr/X11R6/lib/modules/libramdac.a
(--) GLINT(1): FIFO Size is 256 DWORDS
(==) GLINT(1): Min pixel clock is 16 MHz
(--) GLINT(1): Max pixel clock is 110 MHz
(II) GLINT(1): Sun2: Using hsync range of 30.00-82.00 kHz
(II) GLINT(1): Sun2: Using vrefresh range of 50.00-120.00 Hz
(II) GLINT(1): Clock range: 16.25 to 110.00 MHz
(II) GLINT(1): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1792x1344" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1792x1344" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1856x1392" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1856x1392" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1920x1440" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1920x1440" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "1920x1440" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "2048x1536" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "2048x1536" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) GLINT(1): Not using default mode "2048x1536" (insufficient memory for mode)
(II) GLINT(1): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(--) GLINT(1): Virtual size is 1280x1024 (pitch 1280)
(**) GLINT(1): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) GLINT(1): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) GLINT(1): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) GLINT(1): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
(**) GLINT(1): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) GLINT(1): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
(**) GLINT(1): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) GLINT(1): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
(**) GLINT(1): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) GLINT(1): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) GLINT(1): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) GLINT(1): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) GLINT(1): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) GLINT(1): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) GLINT(1): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) GLINT(1): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) GLINT(1): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) GLINT(1): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) GLINT(1): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) GLINT(1): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) GLINT(1): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) GLINT(1): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) GLINT(1): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) GLINT(1): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) GLINT(1): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) GLINT(1): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) GLINT(1): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) GLINT(1): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) GLINT(1): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) GLINT(1): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) GLINT(1): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) GLINT(1): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) GLINT(1): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) GLINT(1): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) GLINT(1): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) GLINT(1): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) GLINT(1): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) GLINT(1): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) GLINT(1): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) GLINT(1): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) GLINT(1): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) GLINT(1): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(++) GLINT(1): DPI set to (100, 100)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Reloading /usr/X11R6/lib/modules/libfb.a
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Reloading /usr/X11R6/lib/modules/libxaa.a
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Reloading /usr/X11R6/lib/modules/libi2c.a
(II) GLINT(1): I2C bus "DDC" initialized.
(II) GLINT(1): I2C bus "Video" initialized.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? Yes, I do.
(II) LoadModule: "rac"
(II) Loading /usr/X11R6/lib/modules/librac.a
(II) Module rac: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) resource ranges after preInit:
[0] 1 1 0x05000000 - 0x057fffff (0x800000) MX[B]
[1] 1 1 0x04800000 - 0x04ffffff (0x800000) MX[B]
[2] 1 1 0x03040000 - 0x0305ffff (0x20000) MX[B]
[3] 0 1 0x04000000 - 0x047fffff (0x800000) MX[B]
[4] 0 1 0x03800000 - 0x03ffffff (0x800000) MX[B]
[5] 0 1 0x03000000 - 0x0301ffff (0x20000) MX[B]
[6] -1 1 0xffffffff - 0xffffffff (0x1) MX[B]
[7] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[8] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[9] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[10] -1 1 0x02000000 - 0x02007fff (0x8000) MX[B]
[11] -1 1 0x00422000 - 0x004227ff (0x800) MX[B]
[12] -1 1 0x00420000 - 0x004207ff (0x800) MX[B]
[13] -1 1 0x00400000 - 0x0041ffff (0x20000) MX[B]
[14] -1 1 0x01800000 - 0x01ffffff (0x800000) MX[B]
[15] -1 1 0x07000000 - 0x07ffffff (0x1000000) MX[B]
[16] -1 1 0x00424000 - 0x00424fff (0x1000) MX[B]
[17] -1 1 0x03030000 - 0x0303ffff (0x10000) MX[B](B)
[18] -1 1 0x05000000 - 0x057fffff (0x800000) MX[B](B)
[19] -1 1 0x04800000 - 0x04ffffff (0x800000) MX[B](B)
[20] -1 1 0x03040000 - 0x0305ffff (0x20000) MX[B](B)
[21] -1 1 0x03020000 - 0x0302ffff (0x10000) MX[B](B)
[22] -1 1 0x04000000 - 0x047fffff (0x800000) MX[B](B)
[23] -1 1 0x03800000 - 0x03ffffff (0x800000) MX[B](B)
[24] -1 1 0x03000000 - 0x0301ffff (0x20000) MX[B](B)
[25] -1 1 0x00440000 - 0x0045ffff (0x20000) MX[B](B)
[26] -1 1 0x00426000 - 0x00426fff (0x1000) MX[B](B)
[27] -1 1 0x06000000 - 0x06ffffff (0x1000000) MX[B](B)
[28] 0 1 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[29] 0 1 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[30] 0 1 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[31] 1 1 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[32] 1 1 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[33] 1 1 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[34] -1 1 0x00ffffff - 0x00ffffff (0x1) IX[B]
[35] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
[36] -1 1 0x00000a20 - 0x00000a2f (0x10) IX[B]
[37] -1 1 0x00000a08 - 0x00000a0b (0x4) IX[B]
[38] -1 1 0x00000a10 - 0x00000a17 (0x8) IX[B]
[39] -1 1 0x00000a18 - 0x00000a1b (0x4) IX[B]
[40] -1 1 0x00000a00 - 0x00000a07 (0x8) IX[B]
[41] -1 1 0x00000900 - 0x000009ff (0x100) IX[B]
[42] -1 1 0x00000b00 - 0x00000bff (0x100) IX[B](B)
[43] 0 1 0x000003b0 - 0x000003bb (0xc) IS[B](OprD)
[44] 0 1 0x000003c0 - 0x000003df (0x20) IS[B](OprD)
[45] 1 1 0x000003b0 - 0x000003bb (0xc) IS[B](OprD)
[46] 1 1 0x000003c0 - 0x000003df (0x20) IS[B](OprD)
[0x0070] -> 0x40001020 (pm2v_dac.c, 289)
[0x0050] -> 0x00000000 (pm2v_dac.c, 290)
[0x0058] -> 0x00000001 (pm2v_dac.c, 291)
[0x1140] -> 0x00000000 (pm2v_dac.c, 293)
[0x1100] -> 0x00000000 (pm2v_dac.c, 295)
[0x0868] -> 0x00000000 (pm2v_dac.c, 296)
[0x0068] -> 0x00000000 (pm2v_dac.c, 297)
[0x3010] -> 0x000000d2 (pm2v_dac.c, 301)
[0x3020] -> 0x00000033 (pm2v_dac.c, 302)
[0x3018] -> 0x00000033 (pm2v_dac.c, 303)
[0x3008] -> 0x000000a0 (pm2v_dac.c, 304)
[0x3028] -> 0x00000006 (pm2v_dac.c, 305)
[0x3030] -> 0x00000014 (pm2v_dac.c, 306)
[0x3038] -> 0x00000429 (pm2v_dac.c, 307)
[0x3040] -> 0x0000002a (pm2v_dac.c, 308)
[0x3048] -> 0x00000000 (pm2v_dac.c, 309)
[0x3050] -> 0x00000003 (pm2v_dac.c, 310)
[0x3000] -> 0x00000000 (pm2v_dac.c, 311)
[0x3058] -> 0x00010029 (pm2v_dac.c, 312)
[0x0040] -> 0x00000000 (pm2v_dac.c, 313)
[0x4038] -> 0x00000000 (pm2v_dac.c, 321)
(II) GLINT(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) GLINT(0): I2C device "DDC:ddc2" removed.
[0x0040] -> 0x00000000 (pm2v_dac.c, 211)
[0x0070] -> 0x40001020 (pm2v_dac.c, 217)
[0x0018] -> 0x00000102 (pm2v_dac.c, 353)
[0x0070] <- 0x40001000 (pm2v_dac.c, 353)
[0x0018] -> 0x00000102 (pm2v_dac.c, 354)
[0x0050] <- 0x00000001 (pm2v_dac.c, 354)
[0x0018] -> 0x00000102 (pm2v_dac.c, 355)
[0x0058] <- 0x00000001 (pm2v_dac.c, 355)
[0x0018] -> 0x00000102 (pm2v_dac.c, 357)
[0x1140] <- 0xffffffff (pm2v_dac.c, 357)
[0x0018] -> 0x00000102 (pm2v_dac.c, 359)
[0x1100] <- 0xffffffff (pm2v_dac.c, 359)
[0x0018] -> 0x00000102 (pm2v_dac.c, 360)
[0x0868] <- 0x00000000 (pm2v_dac.c, 360)
[0x0018] -> 0x00000102 (pm2v_dac.c, 361)
[0x0068] <- 0x00000001 (pm2v_dac.c, 361)
[0x0018] -> 0x00000102 (pm2v_dac.c, 366)
[0x3058] <- 0x00010029 (pm2v_dac.c, 366)
[0x0018] -> 0x00000102 (pm2v_dac.c, 367)
[0x3018] <- 0x000000a0 (pm2v_dac.c, 367)
[0x0018] -> 0x00000102 (pm2v_dac.c, 368)
[0x3000] <- 0x00000000 (pm2v_dac.c, 368)
[0x0018] -> 0x00000102 (pm2v_dac.c, 369)
[0x0040] <- 0x00000000 (pm2v_dac.c, 369)
[0x0018] -> 0x00000102 (pm2v_dac.c, 371)
[0x3008] <- 0x000001a0 (pm2v_dac.c, 371)
[0x0018] -> 0x00000102 (pm2v_dac.c, 372)
[0x3010] <- 0x0000023f (pm2v_dac.c, 372)
[0x0018] -> 0x00000102 (pm2v_dac.c, 373)
[0x3020] <- 0x000000a0 (pm2v_dac.c, 373)
[0x0018] -> 0x00000102 (pm2v_dac.c, 374)
[0x3028] <- 0x0000000f (pm2v_dac.c, 374)
[0x0018] -> 0x00000102 (pm2v_dac.c, 375)
[0x3030] <- 0x00000030 (pm2v_dac.c, 375)
[0x0018] -> 0x00000102 (pm2v_dac.c, 376)
[0x3038] <- 0x0000029a (pm2v_dac.c, 376)
[0x0018] -> 0x00000102 (pm2v_dac.c, 377)
[0x3040] <- 0x0000002b (pm2v_dac.c, 377)
[0x0018] -> 0x00000102 (pm2v_dac.c, 378)
[0x3048] <- 0x00000001 (pm2v_dac.c, 378)
[0x0018] -> 0x00000102 (pm2v_dac.c, 379)
[0x3050] <- 0x00000004 (pm2v_dac.c, 379)
[0x0018] -> 0x00000102 (pm2v_dac.c, 382)
[0x4038] <- 0x00000000 (pm2v_dac.c, 382)
(II) GLINT(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Offscreen Pixmaps
Driver provided WriteBitmap replacement
Driver provided WritePixmap replacement
Setting up tile and stipple cache:
Not enough video memory for pixmap cache
(==) GLINT(0): Backing store disabled
(==) GLINT(0): Silken mouse enabled
(**) Option "dpms"
(**) GLINT(0): DPMS enabled
(II) GLINT(0): direct rendering disabled
(II) GLINT(0): Initializing Xv driver rev. 4
(II) GLINT(0): Xv frontend scaler enabled
(==) RandR enabled
[0x0070] -> 0x40001024 (pm2v_dac.c, 289)
[0x0050] -> 0x00000000 (pm2v_dac.c, 290)
[0x0058] -> 0x00000000 (pm2v_dac.c, 291)
[0x1140] -> 0xffffffff (pm2v_dac.c, 293)
[0x1100] -> 0x80320427 (pm2v_dac.c, 295)
[0x0868] -> 0x00000000 (pm2v_dac.c, 296)
[0x0068] -> 0x00000000 (pm2v_dac.c, 297)
[0x3010] -> 0x00000000 (pm2v_dac.c, 301)
[0x3020] -> 0x00000000 (pm2v_dac.c, 302)
[0x3018] -> 0x00000000 (pm2v_dac.c, 303)
[0x3008] -> 0x00008200 (pm2v_dac.c, 304)
[0x3028] -> 0x00000000 (pm2v_dac.c, 305)
[0x3030] -> 0x00000008 (pm2v_dac.c, 306)
[0x3038] -> 0x00000000 (pm2v_dac.c, 307)
[0x3040] -> 0x00000000 (pm2v_dac.c, 308)
[0x3048] -> 0x000000c0 (pm2v_dac.c, 309)
[0x3050] -> 0x00000202 (pm2v_dac.c, 310)
[0x3000] -> 0x00010830 (pm2v_dac.c, 311)
[0x3058] -> 0x00000000 (pm2v_dac.c, 312)
[0x0040] -> 0x00000000 (pm2v_dac.c, 313)
[0x4038] -> 0x00000000 (pm2v_dac.c, 321)
(II) GLINT(1): I2C device "DDC:ddc2" registered at address 0xA0.
(II) GLINT(1): I2C device "DDC:ddc2" removed.
[0x0040] -> 0x00000000 (pm2v_dac.c, 211)
[0x0070] -> 0x40001024 (pm2v_dac.c, 217)
[0x0018] -> 0x00000102 (pm2v_dac.c, 353)
[0x0070] <- 0x40001004 (pm2v_dac.c, 353)
[0x0018] -> 0x00000102 (pm2v_dac.c, 354)
[0x0050] <- 0x00000001 (pm2v_dac.c, 354)
[0x0018] -> 0x00000102 (pm2v_dac.c, 355)
[0x0058] <- 0x00000001 (pm2v_dac.c, 355)
[0x0018] -> 0x00000102 (pm2v_dac.c, 357)
[0x1140] <- 0xffffffff (pm2v_dac.c, 357)
[0x0018] -> 0x00000102 (pm2v_dac.c, 359)
[0x1100] <- 0xffffffff (pm2v_dac.c, 359)
[0x0018] -> 0x00000102 (pm2v_dac.c, 360)
[0x0868] <- 0x00000000 (pm2v_dac.c, 360)
[0x0018] -> 0x00000102 (pm2v_dac.c, 361)
[0x0068] <- 0x00000001 (pm2v_dac.c, 361)
[0x0018] -> 0x00000102 (pm2v_dac.c, 366)
[0x3058] <- 0x00010029 (pm2v_dac.c, 366)
[0x0018] -> 0x00000102 (pm2v_dac.c, 367)
[0x3018] <- 0x000000cc (pm2v_dac.c, 367)
[0x0018] -> 0x00000102 (pm2v_dac.c, 368)
[0x3000] <- 0x00000000 (pm2v_dac.c, 368)
[0x0018] -> 0x00000102 (pm2v_dac.c, 369)
[0x0040] <- 0x00000000 (pm2v_dac.c, 369)
[0x0018] -> 0x00000102 (pm2v_dac.c, 371)
[0x3008] <- 0x00000280 (pm2v_dac.c, 371)
[0x0018] -> 0x00000102 (pm2v_dac.c, 372)
[0x3010] <- 0x0000034b (pm2v_dac.c, 372)
[0x0018] -> 0x00000102 (pm2v_dac.c, 373)
[0x3020] <- 0x000000cc (pm2v_dac.c, 373)
[0x0018] -> 0x00000102 (pm2v_dac.c, 374)
[0x3028] <- 0x00000017 (pm2v_dac.c, 374)
[0x0018] -> 0x00000102 (pm2v_dac.c, 375)
[0x3030] <- 0x00000050 (pm2v_dac.c, 375)
[0x0018] -> 0x00000102 (pm2v_dac.c, 376)
[0x3038] <- 0x00000429 (pm2v_dac.c, 376)
[0x0018] -> 0x00000102 (pm2v_dac.c, 377)
[0x3040] <- 0x0000002a (pm2v_dac.c, 377)
[0x0018] -> 0x00000102 (pm2v_dac.c, 378)
[0x3048] <- 0x00000001 (pm2v_dac.c, 378)
[0x0018] -> 0x00000102 (pm2v_dac.c, 379)
[0x3050] <- 0x00000004 (pm2v_dac.c, 379)
[0x0018] -> 0x00000102 (pm2v_dac.c, 382)
[0x4038] <- 0x00000000 (pm2v_dac.c, 382)
(II) GLINT(1): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Offscreen Pixmaps
Driver provided WriteBitmap replacement
Driver provided WritePixmap replacement
Setting up tile and stipple cache:
20 128x128 slots
5 256x256 slots
(==) GLINT(1): Backing store disabled
(==) GLINT(1): Silken mouse enabled
(**) Option "dpms"
(**) GLINT(1): DPMS enabled
(II) GLINT(1): direct rendering disabled
(II) GLINT(1): Initializing Xv driver rev. 4
(II) GLINT(1): Xv frontend scaler enabled
(==) RandR enabled
(II) Entity 0 shares no resources
(II) Entity 1 shares no resources
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(==) Configured Mouse: Buttons: 3
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) Server_Terminate keybinding not found
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
Could not init font path element unix/:7100, removing from list!
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Bug#226973: xserver-xfree86: [glint] second card at wrong resolution
2004-01-14 21:16 ` Sven Luther
2004-01-15 21:55 ` Clint Adams
2004-01-15 22:47 ` Clint Adams
@ 2004-03-30 15:32 ` Clint Adams
2004-03-30 16:57 ` Sven Luther
2 siblings, 1 reply; 19+ messages in thread
From: Clint Adams @ 2004-03-30 15:32 UTC (permalink / raw
To: Sven Luther; +Cc: 226973, linux-fbdev-devel
This patch helps, though the second head is still a bit fuzzy.
One other thing I've noticed is that the clock range is detected
by X as 16.25 to 110.00 MHz, though the board specs claim a max of
250MHz.
diff -ruN xc-old/programs/Xserver/hw/xfree86/drivers/glint/glint_regs.h xc/programs/Xserver/hw/xfree86/drivers/glint/glint_regs.h
--- xc-old/programs/Xserver/hw/xfree86/drivers/glint/glint_regs.h 2003-01-11 22:55:47.000000000 -0500
+++ xc/programs/Xserver/hw/xfree86/drivers/glint/glint_regs.h 2004-03-30 10:24:35.000000000 -0500
@@ -75,6 +75,10 @@
((pGlint->PciInfo->subsysCard == 0x0100) || \
(pGlint->PciInfo->subsysCard == 0x0002)))
+/* Tech-Source Raptor GFX 8P (Permedia 2V) */
+#define IS_TSGFX8P ((pGlint->PciInfo->subsysVendor == 0x1227) && \
+ (pGlint->PciInfo->subsysCard == 0x0006))
+
/**********************************************
* GLINT 500TX Configuration Region Registers *
***********************************************/
diff -ruN xc-old/programs/Xserver/hw/xfree86/drivers/glint/pm2v_dac.c xc/programs/Xserver/hw/xfree86/drivers/glint/pm2v_dac.c
--- xc-old/programs/Xserver/hw/xfree86/drivers/glint/pm2v_dac.c 2002-05-07 19:15:59.000000000 -0400
+++ xc/programs/Xserver/hw/xfree86/drivers/glint/pm2v_dac.c 2004-03-30 10:25:19.000000000 -0500
@@ -113,21 +113,21 @@
Permedia2VPreInitSecondary(pScrn);
}
-#if defined(__alpha__)
+#if defined(__alpha__) || defined(__sparc__)
/*
* On Alpha, we have to init secondary PM2V cards, since
* int10 cannot be run on the OEMed cards with VGA disable
* jumpers.
*/
if (!xf86IsPrimaryPci(pGlint->PciInfo)) {
- if ( IS_QPM2V ) {
+ if ( (IS_QPM2V) || (IS_TSGFX8P) ) {
xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"PM2V secondary: initializing\n");
Permedia2VPreInitSecondary(pScrn);
}
}
-#endif /* __alpha__ */
+#endif /* __alpha__ || __sparc__ */
}
Bool
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Bug#226973: xserver-xfree86: [glint] second card at wrong resolution
2004-03-30 15:32 ` Clint Adams
@ 2004-03-30 16:57 ` Sven Luther
2004-03-30 23:02 ` Clint Adams
0 siblings, 1 reply; 19+ messages in thread
From: Sven Luther @ 2004-03-30 16:57 UTC (permalink / raw
To: Clint Adams; +Cc: Sven Luther, 226973, linux-fbdev-devel
On Tue, Mar 30, 2004 at 10:32:47AM -0500, Clint Adams wrote:
> This patch helps, though the second head is still a bit fuzzy.
> One other thing I've noticed is that the clock range is detected
> by X as 16.25 to 110.00 MHz, though the board specs claim a max of
> 250MHz.
I believe that the cloack is different for 8bpp and 16 or 24 bpp, don't
remember exactly. At 8bpp, the max clock range is 230Mhz in the driver i
think. You looked at it, you have the hardware, you just have become the
resident expert on this issue :).
Friendly,
Sven Luther
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Bug#226973: xserver-xfree86: [glint] second card at wrong resolution
2004-03-30 16:57 ` Sven Luther
@ 2004-03-30 23:02 ` Clint Adams
2004-03-30 23:08 ` Sven Luther
0 siblings, 1 reply; 19+ messages in thread
From: Clint Adams @ 2004-03-30 23:02 UTC (permalink / raw
To: Sven Luther; +Cc: 226973, linux-fbdev-devel
> I believe that the cloack is different for 8bpp and 16 or 24 bpp, don't
> remember exactly. At 8bpp, the max clock range is 230Mhz in the driver i
> think. You looked at it, you have the hardware, you just have become the
> resident expert on this issue :).
Ahh. I tried increasing the 32bpp number to 150MHz, and was successfully
able to use a mode at 135MHz. I am confused as to why the Pixmap setting
affects the ramdac frequency. Is this a mistake or am I misunderstanding
something? Would it be okay to set the maximum based on depth instead
of bitsPerPixel, or is bitsPerPixel wrong if it's set to 32 at a plain
24-bit depth?
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Bug#226973: xserver-xfree86: [glint] second card at wrong resolution
2004-03-30 23:02 ` Clint Adams
@ 2004-03-30 23:08 ` Sven Luther
2004-03-31 8:12 ` Geert Uytterhoeven
0 siblings, 1 reply; 19+ messages in thread
From: Sven Luther @ 2004-03-30 23:08 UTC (permalink / raw
To: Clint Adams; +Cc: Sven Luther, 226973, linux-fbdev-devel
On Tue, Mar 30, 2004 at 06:02:03PM -0500, Clint Adams wrote:
> > I believe that the cloack is different for 8bpp and 16 or 24 bpp, don't
> > remember exactly. At 8bpp, the max clock range is 230Mhz in the driver i
> > think. You looked at it, you have the hardware, you just have become the
> > resident expert on this issue :).
>
> Ahh. I tried increasing the 32bpp number to 150MHz, and was successfully
> able to use a mode at 135MHz. I am confused as to why the Pixmap setting
> affects the ramdac frequency. Is this a mistake or am I misunderstanding
> something? Would it be okay to set the maximum based on depth instead
> of bitsPerPixel, or is bitsPerPixel wrong if it's set to 32 at a plain
> 24-bit depth?
I would have to look in the specs, but i believe the ramdac is only able
to push less pixels if those are of 16 or 32 bpp. This is the case for
all 3Dlabs chips prior to the permedia3. Look at the part in glint_driver.c
where these values are set. I have no explanation also, since my
involvement was with the permedia3, so maybe ask Alan Hourihane about
it.
Friendly,
Sven Luther
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Re: Bug#226973: xserver-xfree86: [glint] second card at wrong resolution
2004-03-30 23:08 ` Sven Luther
@ 2004-03-31 8:12 ` Geert Uytterhoeven
2004-03-31 16:10 ` Clint Adams
0 siblings, 1 reply; 19+ messages in thread
From: Geert Uytterhoeven @ 2004-03-31 8:12 UTC (permalink / raw
To: Sven Luther; +Cc: Clint Adams, 226973, Linux Frame Buffer Device Development
On Wed, 31 Mar 2004, Sven Luther wrote:
> On Tue, Mar 30, 2004 at 06:02:03PM -0500, Clint Adams wrote:
> > > I believe that the cloack is different for 8bpp and 16 or 24 bpp, don't
> > > remember exactly. At 8bpp, the max clock range is 230Mhz in the driver i
> > > think. You looked at it, you have the hardware, you just have become the
> > > resident expert on this issue :).
> >
> > Ahh. I tried increasing the 32bpp number to 150MHz, and was successfully
> > able to use a mode at 135MHz. I am confused as to why the Pixmap setting
> > affects the ramdac frequency. Is this a mistake or am I misunderstanding
> > something? Would it be okay to set the maximum based on depth instead
> > of bitsPerPixel, or is bitsPerPixel wrong if it's set to 32 at a plain
> > 24-bit depth?
>
> I would have to look in the specs, but i believe the ramdac is only able
> to push less pixels if those are of 16 or 32 bpp. This is the case for
> all 3Dlabs chips prior to the permedia3. Look at the part in glint_driver.c
> where these values are set. I have no explanation also, since my
> involvement was with the permedia3, so maybe ask Alan Hourihane about
> it.
If your graphics controller is limited by memory bandwidth, the maximum pixel
clock depends on the number of bits per pixels, since larger pixels mean more
memory bandwidth.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Re: Bug#226973: xserver-xfree86: [glint] second card at wrong resolution
2004-03-31 8:12 ` Geert Uytterhoeven
@ 2004-03-31 16:10 ` Clint Adams
2004-04-01 6:41 ` Bug#226973: " Branden Robinson
0 siblings, 1 reply; 19+ messages in thread
From: Clint Adams @ 2004-03-31 16:10 UTC (permalink / raw
To: Geert Uytterhoeven
Cc: Sven Luther, 226973, Linux Frame Buffer Device Development
> If your graphics controller is limited by memory bandwidth, the maximum pixel
> clock depends on the number of bits per pixels, since larger pixels mean more
> memory bandwidth.
I'm unclear on the differences between 24 bpp and 32 bpp and how this
relates to internal pixmap format.
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Bug#226973: Re: Bug#226973: xserver-xfree86: [glint] second card at wrong resolution
2004-03-31 16:10 ` Clint Adams
@ 2004-04-01 6:41 ` Branden Robinson
2004-04-01 6:51 ` Sven Luther
0 siblings, 1 reply; 19+ messages in thread
From: Branden Robinson @ 2004-04-01 6:41 UTC (permalink / raw
To: Clint Adams, 226973
Cc: Geert Uytterhoeven, Sven Luther,
Linux Frame Buffer Device Development
[-- Attachment #1: Type: text/plain, Size: 875 bytes --]
On Wed, Mar 31, 2004 at 11:10:02AM -0500, Clint Adams wrote:
> > If your graphics controller is limited by memory bandwidth, the maximum pixel
> > clock depends on the number of bits per pixels, since larger pixels mean more
> > memory bandwidth.
>
> I'm unclear on the differences between 24 bpp and 32 bpp and how this
> relates to internal pixmap format.
Some hardware uses a "packed-pixel format"; that is, 4 24-bit pixels are
encoded in 3 32-bit words (what Intel calls "DWORDS", I think).
Other hardware tosses in a zero byte with every 32-bit "DWORD" transfer.
--
G. Branden Robinson | The last time the Republican Party
Debian GNU/Linux | was on the right side of a social
branden@debian.org | issue, Abe Lincoln was president.
http://people.debian.org/~branden/ | -- Kirk Tofte
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Bug#226973: Re: Bug#226973: xserver-xfree86: [glint] second card at wrong resolution
2004-04-01 6:41 ` Bug#226973: " Branden Robinson
@ 2004-04-01 6:51 ` Sven Luther
2004-04-01 16:41 ` Branden Robinson
0 siblings, 1 reply; 19+ messages in thread
From: Sven Luther @ 2004-04-01 6:51 UTC (permalink / raw
To: Branden Robinson
Cc: Clint Adams, 226973, Geert Uytterhoeven, Sven Luther,
Linux Frame Buffer Device Development
On Thu, Apr 01, 2004 at 01:41:22AM -0500, Branden Robinson wrote:
> On Wed, Mar 31, 2004 at 11:10:02AM -0500, Clint Adams wrote:
> > > If your graphics controller is limited by memory bandwidth, the maximum pixel
> > > clock depends on the number of bits per pixels, since larger pixels mean more
> > > memory bandwidth.
> >
> > I'm unclear on the differences between 24 bpp and 32 bpp and how this
> > relates to internal pixmap format.
>
> Some hardware uses a "packed-pixel format"; that is, 4 24-bit pixels are
> encoded in 3 32-bit words (what Intel calls "DWORDS", I think).
Yeah, DWORDS, because they are stil living in the era of 16bit hardware :)
> Other hardware tosses in a zero byte with every 32-bit "DWORD" transfer.
Well, the permedia2 should support both formats, depending on chosen
mode.
Friendly,
Sven Luther
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Bug#226973: Re: Bug#226973: xserver-xfree86: [glint] second card at wrong resolution
2004-04-01 6:51 ` Sven Luther
@ 2004-04-01 16:41 ` Branden Robinson
0 siblings, 0 replies; 19+ messages in thread
From: Branden Robinson @ 2004-04-01 16:41 UTC (permalink / raw
To: Sven Luther
Cc: Clint Adams, 226973, Geert Uytterhoeven,
Linux Frame Buffer Device Development
[-- Attachment #1: Type: text/plain, Size: 1501 bytes --]
On Thu, Apr 01, 2004 at 08:51:02AM +0200, Sven Luther wrote:
> On Thu, Apr 01, 2004 at 01:41:22AM -0500, Branden Robinson wrote:
> > On Wed, Mar 31, 2004 at 11:10:02AM -0500, Clint Adams wrote:
> > > > If your graphics controller is limited by memory bandwidth, the maximum pixel
> > > > clock depends on the number of bits per pixels, since larger pixels mean more
> > > > memory bandwidth.
> > >
> > > I'm unclear on the differences between 24 bpp and 32 bpp and how this
> > > relates to internal pixmap format.
> >
> > Some hardware uses a "packed-pixel format"; that is, 4 24-bit pixels are
> > encoded in 3 32-bit words (what Intel calls "DWORDS", I think).
>
> Yeah, DWORDS, because they are stil living in the era of 16bit hardware :)
>
> > Other hardware tosses in a zero byte with every 32-bit "DWORD" transfer.
>
> Well, the permedia2 should support both formats, depending on chosen
> mode.
Well, maybe this is what is going on. Maybe Solaris is using a
packed-pixel format, and XFree86 is using zero-padded format.
That is, assuming it's the RAMDAC's job to understand the pixel format,
and that some part isn't stuck in front of it to give it a standardized
format. I wouldn't know.
--
G. Branden Robinson | That's the saving grace of humor:
Debian GNU/Linux | if you fail, no one is laughing at
branden@debian.org | you.
http://people.debian.org/~branden/ | -- A. Whitney Brown
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 19+ messages in thread
end of thread, other threads:[~2004-04-01 16:41 UTC | newest]
Thread overview: 19+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20040109163119.GA10151@scowler.net>
[not found] ` <20040112121558.GA24511@iliana>
[not found] ` <20040112215543.GB2150@scowler.net>
2004-01-13 7:41 ` Bug#226973: xserver-xfree86: [glint] second card at wrong resolution Sven Luther
2004-01-13 15:40 ` Clint Adams
2004-01-13 16:02 ` Sven Luther
2004-01-14 21:06 ` Clint Adams
2004-01-14 21:12 ` Sven Luther
2004-01-14 21:17 ` Clint Adams
2004-01-14 21:12 ` Clint Adams
2004-01-14 21:16 ` Sven Luther
2004-01-15 21:55 ` Clint Adams
2004-01-15 22:47 ` Clint Adams
2004-03-30 15:32 ` Clint Adams
2004-03-30 16:57 ` Sven Luther
2004-03-30 23:02 ` Clint Adams
2004-03-30 23:08 ` Sven Luther
2004-03-31 8:12 ` Geert Uytterhoeven
2004-03-31 16:10 ` Clint Adams
2004-04-01 6:41 ` Bug#226973: " Branden Robinson
2004-04-01 6:51 ` Sven Luther
2004-04-01 16:41 ` Branden Robinson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.