* [PATCH v2 0/2] Enable DMA mode on Intel Keem Bay platform
@ 2021-01-08 3:12 Michael Sit Wei Hong
2021-01-08 3:12 ` [PATCH v2 1/2] dt-bindings: sound: intel, keembay-i2s: Add info for device to use DMA Michael Sit Wei Hong
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Michael Sit Wei Hong @ 2021-01-08 3:12 UTC (permalink / raw
To: alsa-devel
Cc: cezary.rojewski, lars, tiwai, jee.heng.sia, pierre-louis.bossart,
liam.r.girdwood, broonie
v2: Update patch to align with latest kernel release.
v1: Initial patch version, to enable DMA mode on Intel Keembay platform.
Michael Sit Wei Hong (2):
dt-bindings: sound: intel, keembay-i2s: Add info for device to use DMA
ASoC: Intel: KMB: Enable DMA transfer mode
.../bindings/sound/intel,keembay-i2s.yaml | 14 ++
sound/soc/intel/Kconfig | 2 +
sound/soc/intel/keembay/kmb_platform.c | 157 ++++++++++++++++--
sound/soc/intel/keembay/kmb_platform.h | 9 +
4 files changed, 167 insertions(+), 15 deletions(-)
--
2.17.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v2 1/2] dt-bindings: sound: intel, keembay-i2s: Add info for device to use DMA
2021-01-08 3:12 [PATCH v2 0/2] Enable DMA mode on Intel Keem Bay platform Michael Sit Wei Hong
@ 2021-01-08 3:12 ` Michael Sit Wei Hong
2021-01-14 20:42 ` Rob Herring
2021-01-08 3:12 ` [PATCH v2 2/2] ASoC: Intel: KMB: Enable DMA transfer mode Michael Sit Wei Hong
2021-01-11 16:27 ` [PATCH v2 0/2] Enable DMA mode on Intel Keem Bay platform Mark Brown
2 siblings, 1 reply; 5+ messages in thread
From: Michael Sit Wei Hong @ 2021-01-08 3:12 UTC (permalink / raw
To: alsa-devel
Cc: cezary.rojewski, lars, tiwai, jee.heng.sia, pierre-louis.bossart,
liam.r.girdwood, broonie
Add descriptions for entries needed for audio device to use DMA
channels for audio playback and capture.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
.../bindings/sound/intel,keembay-i2s.yaml | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml
index d346e61ab708..e0658f122cbb 100644
--- a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml
@@ -45,6 +45,18 @@ properties:
- const: osc
- const: apb_clk
+ dmas:
+ items:
+ - description: DMA controller phandle and DMA channel
+ for TX and RX
+
+ dma-names:
+ items:
+ - description: "tx" for the transmit channel
+ "rx" for the receive channel
+ - const: tx
+ - const: rx
+
required:
- compatible
- "#sound-dai-cells"
@@ -70,4 +82,6 @@ examples:
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "osc", "apb_clk";
clocks = <&scmi_clk KEEM_BAY_PSS_AUX_I2S3>, <&scmi_clk KEEM_BAY_PSS_I2S3>;
+ dmas = <&axi_dma0 29 &axi_dma0 33>;
+ dma-names = "tx", "rx";
};
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v2 2/2] ASoC: Intel: KMB: Enable DMA transfer mode
2021-01-08 3:12 [PATCH v2 0/2] Enable DMA mode on Intel Keem Bay platform Michael Sit Wei Hong
2021-01-08 3:12 ` [PATCH v2 1/2] dt-bindings: sound: intel, keembay-i2s: Add info for device to use DMA Michael Sit Wei Hong
@ 2021-01-08 3:12 ` Michael Sit Wei Hong
2021-01-11 16:27 ` [PATCH v2 0/2] Enable DMA mode on Intel Keem Bay platform Mark Brown
2 siblings, 0 replies; 5+ messages in thread
From: Michael Sit Wei Hong @ 2021-01-08 3:12 UTC (permalink / raw
To: alsa-devel
Cc: cezary.rojewski, lars, tiwai, jee.heng.sia, pierre-louis.bossart,
liam.r.girdwood, broonie
Enable DMA transfer mode for Intel Keem Bay ASoC platform driver.
The driver will search the device tree for DMA resources at boot
time to enable DMA transfer mode, and will proceed to use DMA
transfer if the resource is available, otherwise the default PIO
mode will be used.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
sound/soc/intel/Kconfig | 2 +
sound/soc/intel/keembay/kmb_platform.c | 157 ++++++++++++++++++++++---
sound/soc/intel/keembay/kmb_platform.h | 9 ++
3 files changed, 153 insertions(+), 15 deletions(-)
diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig
index 0c6404fc12b3..f3a4a907b29d 100644
--- a/sound/soc/intel/Kconfig
+++ b/sound/soc/intel/Kconfig
@@ -203,6 +203,8 @@ config SND_SOC_INTEL_KEEMBAY
tristate "Keembay Platforms"
depends on ARCH_KEEMBAY || COMPILE_TEST
depends on COMMON_CLK
+ select SND_DMAENGINE_PCM
+ select SND_SOC_GENERIC_DMAENGINE_PCM
help
If you have a Intel Keembay platform then enable this option
by saying Y or m.
diff --git a/sound/soc/intel/keembay/kmb_platform.c b/sound/soc/intel/keembay/kmb_platform.c
index 1c3748f33136..4961ba89c110 100644
--- a/sound/soc/intel/keembay/kmb_platform.c
+++ b/sound/soc/intel/keembay/kmb_platform.c
@@ -6,10 +6,12 @@
//
#include <linux/clk.h>
+#include <linux/dma-mapping.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <sound/dmaengine_pcm.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
@@ -343,6 +345,53 @@ static const struct snd_soc_component_driver kmb_component = {
.pointer = kmb_pcm_pointer,
};
+static const struct snd_soc_component_driver kmb_component_dma = {
+ .name = "kmb",
+};
+
+static int kmb_probe(struct snd_soc_dai *cpu_dai)
+{
+ struct kmb_i2s_info *kmb_i2s = snd_soc_dai_get_drvdata(cpu_dai);
+
+ if (kmb_i2s->use_pio)
+ return 0;
+
+ snd_soc_dai_init_dma_data(cpu_dai, &kmb_i2s->play_dma_data,
+ &kmb_i2s->capture_dma_data);
+
+ return 0;
+}
+
+static inline void kmb_i2s_enable_dma(struct kmb_i2s_info *kmb_i2s, u32 stream)
+{
+ u32 dma_reg;
+
+ dma_reg = readl(kmb_i2s->i2s_base + I2S_DMACR);
+ /* Enable DMA handshake for stream */
+ if (stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dma_reg |= I2S_DMAEN_TXBLOCK;
+ else
+ dma_reg |= I2S_DMAEN_RXBLOCK;
+
+ writel(dma_reg, kmb_i2s->i2s_base + I2S_DMACR);
+}
+
+static inline void kmb_i2s_disable_dma(struct kmb_i2s_info *kmb_i2s, u32 stream)
+{
+ u32 dma_reg;
+
+ dma_reg = readl(kmb_i2s->i2s_base + I2S_DMACR);
+ /* Disable DMA handshake for stream */
+ if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ dma_reg &= ~I2S_DMAEN_TXBLOCK;
+ writel(1, kmb_i2s->i2s_base + I2S_RTXDMA);
+ } else {
+ dma_reg &= ~I2S_DMAEN_RXBLOCK;
+ writel(1, kmb_i2s->i2s_base + I2S_RRXDMA);
+ }
+ writel(dma_reg, kmb_i2s->i2s_base + I2S_DMACR);
+}
+
static void kmb_i2s_start(struct kmb_i2s_info *kmb_i2s,
struct snd_pcm_substream *substream)
{
@@ -356,7 +405,11 @@ static void kmb_i2s_start(struct kmb_i2s_info *kmb_i2s,
else
writel(1, kmb_i2s->i2s_base + IRER);
- kmb_i2s_irq_trigger(kmb_i2s, substream->stream, config->chan_nr, true);
+ if (kmb_i2s->use_pio)
+ kmb_i2s_irq_trigger(kmb_i2s, substream->stream,
+ config->chan_nr, true);
+ else
+ kmb_i2s_enable_dma(kmb_i2s, substream->stream);
if (kmb_i2s->clock_provider)
writel(1, kmb_i2s->i2s_base + CER);
@@ -434,7 +487,8 @@ static int kmb_dai_trigger(struct snd_pcm_substream *substream,
break;
case SNDRV_PCM_TRIGGER_STOP:
kmb_i2s->active--;
- kmb_i2s_stop(kmb_i2s, substream);
+ if (kmb_i2s->use_pio)
+ kmb_i2s_stop(kmb_i2s, substream);
break;
default:
return -EINVAL;
@@ -485,16 +539,22 @@ static int kmb_dai_hw_params(struct snd_pcm_substream *substream,
config->data_width = 16;
kmb_i2s->ccr = 0x00;
kmb_i2s->xfer_resolution = 0x02;
+ kmb_i2s->play_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+ kmb_i2s->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
break;
case SNDRV_PCM_FORMAT_S24_LE:
config->data_width = 32;
kmb_i2s->ccr = 0x14;
kmb_i2s->xfer_resolution = 0x05;
+ kmb_i2s->play_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ kmb_i2s->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
break;
case SNDRV_PCM_FORMAT_S32_LE:
config->data_width = 32;
kmb_i2s->ccr = 0x10;
kmb_i2s->xfer_resolution = 0x05;
+ kmb_i2s->play_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ kmb_i2s->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
break;
default:
dev_err(kmb_i2s->dev, "kmb: unsupported PCM fmt");
@@ -572,9 +632,56 @@ static int kmb_dai_prepare(struct snd_pcm_substream *substream,
return 0;
}
+static int kmb_dai_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct kmb_i2s_info *kmb_i2s = snd_soc_dai_get_drvdata(cpu_dai);
+ struct snd_dmaengine_dai_dma_data *dma_data;
+
+ if (kmb_i2s->use_pio)
+ return 0;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dma_data = &kmb_i2s->play_dma_data;
+ else
+ dma_data = &kmb_i2s->capture_dma_data;
+
+ snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
+
+ return 0;
+}
+
+static int kmb_dai_hw_free(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct kmb_i2s_info *kmb_i2s = snd_soc_dai_get_drvdata(cpu_dai);
+ /* I2S Programming sequence in Keem_Bay_VPU_DB_v1.1 */
+ if (kmb_i2s->use_pio)
+ kmb_i2s_clear_irqs(kmb_i2s, substream->stream);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ writel(0, kmb_i2s->i2s_base + ITER);
+ else
+ writel(0, kmb_i2s->i2s_base + IRER);
+
+ if (kmb_i2s->use_pio)
+ kmb_i2s_irq_trigger(kmb_i2s, substream->stream, 8, false);
+ else
+ kmb_i2s_disable_dma(kmb_i2s, substream->stream);
+
+ if (!kmb_i2s->active) {
+ writel(0, kmb_i2s->i2s_base + CER);
+ writel(0, kmb_i2s->i2s_base + IER);
+ }
+
+ return 0;
+}
+
static struct snd_soc_dai_ops kmb_dai_ops = {
+ .startup = kmb_dai_startup,
.trigger = kmb_dai_trigger,
.hw_params = kmb_dai_hw_params,
+ .hw_free = kmb_dai_hw_free,
.prepare = kmb_dai_prepare,
.set_fmt = kmb_set_dai_fmt,
};
@@ -607,6 +714,7 @@ static struct snd_soc_dai_driver intel_kmb_i2s_dai[] = {
SNDRV_PCM_FMTBIT_S16_LE),
},
.ops = &kmb_dai_ops,
+ .probe = kmb_probe,
},
};
@@ -626,6 +734,7 @@ static struct snd_soc_dai_driver intel_kmb_tdm_dai[] = {
SNDRV_PCM_FMTBIT_S16_LE),
},
.ops = &kmb_dai_ops,
+ .probe = kmb_probe,
},
};
@@ -637,10 +746,12 @@ static const struct of_device_id kmb_plat_of_match[] = {
static int kmb_plat_dai_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
struct snd_soc_dai_driver *kmb_i2s_dai;
const struct of_device_id *match;
struct device *dev = &pdev->dev;
struct kmb_i2s_info *kmb_i2s;
+ struct resource *res;
int ret, irq;
u32 comp1_reg;
@@ -682,7 +793,7 @@ static int kmb_plat_dai_probe(struct platform_device *pdev)
return PTR_ERR(kmb_i2s->clk_i2s);
}
- kmb_i2s->i2s_base = devm_platform_ioremap_resource(pdev, 0);
+ kmb_i2s->i2s_base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
if (IS_ERR(kmb_i2s->i2s_base))
return PTR_ERR(kmb_i2s->i2s_base);
@@ -692,22 +803,38 @@ static int kmb_plat_dai_probe(struct platform_device *pdev)
kmb_i2s->dev = &pdev->dev;
- irq = platform_get_irq_optional(pdev, 0);
- if (irq > 0) {
- ret = devm_request_irq(dev, irq, kmb_i2s_irq_handler, 0,
- pdev->name, kmb_i2s);
- if (ret < 0) {
- dev_err(dev, "failed to request irq\n");
- return ret;
- }
- }
-
comp1_reg = readl(kmb_i2s->i2s_base + I2S_COMP_PARAM_1);
kmb_i2s->fifo_th = (1 << COMP1_FIFO_DEPTH(comp1_reg)) / 2;
- ret = devm_snd_soc_register_component(dev, &kmb_component,
- kmb_i2s_dai, 1);
+ kmb_i2s->use_pio = !(of_property_read_bool(np, "dmas"));
+
+ if (kmb_i2s->use_pio) {
+ irq = platform_get_irq_optional(pdev, 0);
+ if (irq > 0) {
+ ret = devm_request_irq(dev, irq, kmb_i2s_irq_handler, 0,
+ pdev->name, kmb_i2s);
+ if (ret < 0) {
+ dev_err(dev, "failed to request irq\n");
+ return ret;
+ }
+ }
+ ret = devm_snd_soc_register_component(dev, &kmb_component,
+ kmb_i2s_dai, 1);
+ } else {
+ kmb_i2s->play_dma_data.addr = res->start + I2S_TXDMA;
+ kmb_i2s->capture_dma_data.addr = res->start + I2S_RXDMA;
+ ret = snd_dmaengine_pcm_register(&pdev->dev,
+ NULL, 0);
+ if (ret) {
+ dev_err(&pdev->dev, "could not register dmaengine: %d\n",
+ ret);
+ return ret;
+ }
+ ret = devm_snd_soc_register_component(dev, &kmb_component_dma,
+ kmb_i2s_dai, 1);
+ }
+
if (ret) {
dev_err(dev, "not able to register dai\n");
return ret;
diff --git a/sound/soc/intel/keembay/kmb_platform.h b/sound/soc/intel/keembay/kmb_platform.h
index 0c393e5916b6..67234caee814 100644
--- a/sound/soc/intel/keembay/kmb_platform.h
+++ b/sound/soc/intel/keembay/kmb_platform.h
@@ -12,6 +12,7 @@
#include <linux/bits.h>
#include <linux/bitfield.h>
#include <linux/types.h>
+#include <sound/dmaengine_pcm.h>
/* Register values with reference to KMB databook v1.1 */
/* common register for all channel */
@@ -103,7 +104,12 @@
#define DW_I2S_PROVIDER BIT(3)
#define I2S_RXDMA 0x01C0
+#define I2S_RRXDMA 0x01C4
#define I2S_TXDMA 0x01C8
+#define I2S_RTXDMA 0x01CC
+#define I2S_DMACR 0x0200
+#define I2S_DMAEN_RXBLOCK (1 << 16)
+#define I2S_DMAEN_TXBLOCK (1 << 17)
/*
* struct i2s_clk_config_data - represent i2s clk configuration data
@@ -131,6 +137,9 @@ struct kmb_i2s_info {
u32 xfer_resolution;
u32 fifo_th;
bool clock_provider;
+ /* data related to DMA transfers b/w i2s and DMAC */
+ struct snd_dmaengine_dai_dma_data play_dma_data;
+ struct snd_dmaengine_dai_dma_data capture_dma_data;
struct i2s_clk_config_data config;
int (*i2s_clk_cfg)(struct i2s_clk_config_data *config);
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2 0/2] Enable DMA mode on Intel Keem Bay platform
2021-01-08 3:12 [PATCH v2 0/2] Enable DMA mode on Intel Keem Bay platform Michael Sit Wei Hong
2021-01-08 3:12 ` [PATCH v2 1/2] dt-bindings: sound: intel, keembay-i2s: Add info for device to use DMA Michael Sit Wei Hong
2021-01-08 3:12 ` [PATCH v2 2/2] ASoC: Intel: KMB: Enable DMA transfer mode Michael Sit Wei Hong
@ 2021-01-11 16:27 ` Mark Brown
2 siblings, 0 replies; 5+ messages in thread
From: Mark Brown @ 2021-01-11 16:27 UTC (permalink / raw
To: alsa-devel, Michael Sit Wei Hong
Cc: cezary.rojewski, lars, tiwai, jee.heng.sia, pierre-louis.bossart,
liam.r.girdwood
On Fri, 8 Jan 2021 11:12:46 +0800, Michael Sit Wei Hong wrote:
> Michael Sit Wei Hong (2):
> dt-bindings: sound: intel, keembay-i2s: Add info for device to use DMA
> ASoC: Intel: KMB: Enable DMA transfer mode
>
> .../bindings/sound/intel,keembay-i2s.yaml | 14 ++
> sound/soc/intel/Kconfig | 2 +
> sound/soc/intel/keembay/kmb_platform.c | 157 ++++++++++++++++--
> sound/soc/intel/keembay/kmb_platform.h | 9 +
> 4 files changed, 167 insertions(+), 15 deletions(-)
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/2] dt-bindings: sound: intel, keembay-i2s: Add info for device to use DMA
commit: 9ddaa1e6181b3d33080f2ed7c27cb0bba819e562
[2/2] ASoC: Intel: KMB: Enable DMA transfer mode
commit: 11b943c06a1c1baafb0325896e666d77f5ac78b8
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: sound: intel, keembay-i2s: Add info for device to use DMA
2021-01-08 3:12 ` [PATCH v2 1/2] dt-bindings: sound: intel, keembay-i2s: Add info for device to use DMA Michael Sit Wei Hong
@ 2021-01-14 20:42 ` Rob Herring
0 siblings, 0 replies; 5+ messages in thread
From: Rob Herring @ 2021-01-14 20:42 UTC (permalink / raw
To: Michael Sit Wei Hong
Cc: alsa-devel, lars, cezary.rojewski, pierre-louis.bossart,
jee.heng.sia, tiwai, liam.r.girdwood, broonie
On Fri, Jan 08, 2021 at 11:12:47AM +0800, Michael Sit Wei Hong wrote:
> Add descriptions for entries needed for audio device to use DMA
> channels for audio playback and capture.
Please use get_maintainers.pl so patches go to the right lists.
This binding has errors in linux-next:
./Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml: while parsing a block mapping
in "<unicode string>", line 55, column 9
did not find expected key
in "<unicode string>", line 55, column 27
>
> Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
> ---
> .../bindings/sound/intel,keembay-i2s.yaml | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml
> index d346e61ab708..e0658f122cbb 100644
> --- a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml
> +++ b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml
> @@ -45,6 +45,18 @@ properties:
> - const: osc
> - const: apb_clk
>
> + dmas:
> + items:
> + - description: DMA controller phandle and DMA channel
> + for TX and RX
This defines 'dmas' has 1 entry.
> +
> + dma-names:
> + items:
> + - description: "tx" for the transmit channel
The quotes are what cause the above problem.
> + "rx" for the receive channel
> + - const: tx
> + - const: rx
And here dma-names has 3 entries. Drop 'description' because it just
says what the schema defines.
Please send incremental fixes as Mark already applied.
Rob
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-01-14 20:43 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-01-08 3:12 [PATCH v2 0/2] Enable DMA mode on Intel Keem Bay platform Michael Sit Wei Hong
2021-01-08 3:12 ` [PATCH v2 1/2] dt-bindings: sound: intel, keembay-i2s: Add info for device to use DMA Michael Sit Wei Hong
2021-01-14 20:42 ` Rob Herring
2021-01-08 3:12 ` [PATCH v2 2/2] ASoC: Intel: KMB: Enable DMA transfer mode Michael Sit Wei Hong
2021-01-11 16:27 ` [PATCH v2 0/2] Enable DMA mode on Intel Keem Bay platform Mark Brown
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.