* [PATCH 0/3] ARM: DTS: da850: add node for i2c1
@ 2016-04-01 15:42 ` Petr Kulhavy
0 siblings, 0 replies; 16+ messages in thread
From: Petr Kulhavy @ 2016-04-01 15:42 UTC (permalink / raw
To: nsekhar-l0cyMroinI0, khilman-DgEjT+Ai2ygdnm+yROfE0A,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, linux-lFZ/pmaqli7XmaaqVzeoHQ
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, david-nq/r/kbU++upp/zk7JDF2g,
Petr Kulhavy
This adds I2C-1 device tree node for the da850 platform
I've borrowed the first patch of the series from David Lechner from MUSB as it
corrects the wrong addresses in the da850.dts files. The da850 was using the
physical addresses after the "@" rather than the <reg> addresses as the
convention says.
---
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 0/3] ARM: DTS: da850: add node for i2c1
@ 2016-04-01 15:42 ` Petr Kulhavy
0 siblings, 0 replies; 16+ messages in thread
From: Petr Kulhavy @ 2016-04-01 15:42 UTC (permalink / raw
To: linux-arm-kernel
This adds I2C-1 device tree node for the da850 platform
I've borrowed the first patch of the series from David Lechner from MUSB as it
corrects the wrong addresses in the da850.dts files. The da850 was using the
physical addresses after the "@" rather than the <reg> addresses as the
convention says.
---
1.9.1
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 1/3] dt: davinci: use proper address after @
2016-04-01 15:42 ` Petr Kulhavy
@ 2016-04-01 15:42 ` Petr Kulhavy
-1 siblings, 0 replies; 16+ messages in thread
From: Petr Kulhavy @ 2016-04-01 15:42 UTC (permalink / raw
To: nsekhar-l0cyMroinI0, khilman-DgEjT+Ai2ygdnm+yROfE0A,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, linux-lFZ/pmaqli7XmaaqVzeoHQ
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, david-nq/r/kbU++upp/zk7JDF2g
From: David Lechner <david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
TI has been using the physical address in DT after the @ in device nodes.
The device tree convention is to use the same address that is used for
the reg property. This updates all davinci DT files to use the proper
convention.
Signed-off-by: David Lechner <david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
arch/arm/boot/dts/da850-enbw-cmc.dts | 8 +++---
arch/arm/boot/dts/da850-evm.dts | 26 +++++++++---------
arch/arm/boot/dts/da850.dtsi | 52 ++++++++++++++++++------------------
3 files changed, 43 insertions(+), 43 deletions(-)
diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts
index 645549e14237..101d1a16b0ac 100644
--- a/arch/arm/boot/dts/da850-enbw-cmc.dts
+++ b/arch/arm/boot/dts/da850-enbw-cmc.dts
@@ -16,14 +16,14 @@
compatible = "enbw,cmc", "ti,da850";
model = "EnBW CMC";
- soc {
- serial0: serial@1c42000 {
+ soc@1c00000 {
+ serial0: serial@42000 {
status = "okay";
};
- serial1: serial@1d0c000 {
+ serial1: serial@10c000 {
status = "okay";
};
- serial2: serial@1d0d000 {
+ serial2: serial@10d000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index ef061e9a2315..1a15db8e376b 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -14,8 +14,8 @@
compatible = "ti,da850-evm", "ti,da850";
model = "DA850/AM1808/OMAP-L138 EVM";
- soc {
- pmx_core: pinmux@1c14120 {
+ soc@1c00000 {
+ pmx_core: pinmux@14120 {
status = "okay";
mcasp0_pins: pinmux_mcasp0_pins {
@@ -30,19 +30,19 @@
>;
};
};
- serial0: serial@1c42000 {
+ serial0: serial@42000 {
status = "okay";
};
- serial1: serial@1d0c000 {
+ serial1: serial@10c000 {
status = "okay";
};
- serial2: serial@1d0d000 {
+ serial2: serial@10d000 {
status = "okay";
};
- rtc0: rtc@1c23000 {
+ rtc0: rtc@23000 {
status = "okay";
};
- i2c0: i2c@1c22000 {
+ i2c0: i2c@22000 {
status = "okay";
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -66,17 +66,17 @@
};
};
- wdt: wdt@1c21000 {
+ wdt: wdt@21000 {
status = "okay";
};
- mmc0: mmc@1c40000 {
+ mmc0: mmc@40000 {
max-frequency = <50000000>;
bus-width = <4>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
};
- spi1: spi@1f0e000 {
+ spi1: spi@30e000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
@@ -116,18 +116,18 @@
};
};
};
- mdio: mdio@1e24000 {
+ mdio: mdio@224000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;
bus_freq = <2200000>;
};
- eth0: ethernet@1e20000 {
+ eth0: ethernet@220000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mii_pins>;
};
- gpio: gpio@1e26000 {
+ gpio: gpio@226000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 226cda76e77c..42948496b8f7 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -15,7 +15,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges;
- intc: interrupt-controller {
+ intc: interrupt-controller@fffee000 {
compatible = "ti,cp-intc";
interrupt-controller;
#interrupt-cells = <1>;
@@ -23,7 +23,7 @@
reg = <0xfffee000 0x2000>;
};
};
- soc {
+ soc@1c00000 {
compatible = "simple-bus";
model = "da850";
#address-cells = <1>;
@@ -31,7 +31,7 @@
ranges = <0x0 0x01c00000 0x400000>;
interrupt-parent = <&intc>;
- pmx_core: pinmux@1c14120 {
+ pmx_core: pinmux@14120 {
compatible = "pinctrl-single";
reg = <0x14120 0x50>;
#address-cells = <1>;
@@ -150,7 +150,7 @@
};
};
- edma0: edma@01c00000 {
+ edma0: edma@0 {
compatible = "ti,edma3-tpcc";
/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
reg = <0x0 0x8000>;
@@ -161,19 +161,19 @@
ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
};
- edma0_tptc0: tptc@01c08000 {
+ edma0_tptc0: tptc@8000 {
compatible = "ti,edma3-tptc";
reg = <0x8000 0x400>;
interrupts = <13>;
interrupt-names = "edm3_tcerrint";
};
- edma0_tptc1: tptc@01c08400 {
+ edma0_tptc1: tptc@8400 {
compatible = "ti,edma3-tptc";
reg = <0x8400 0x400>;
interrupts = <32>;
interrupt-names = "edm3_tcerrint";
};
- edma1: edma@01e30000 {
+ edma1: edma@230000 {
compatible = "ti,edma3-tpcc";
/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
reg = <0x230000 0x8000>;
@@ -184,41 +184,41 @@
ti,tptcs = <&edma1_tptc0 7>;
};
- edma1_tptc0: tptc@01e38000 {
+ edma1_tptc0: tptc@238000 {
compatible = "ti,edma3-tptc";
reg = <0x238000 0x400>;
interrupts = <95>;
interrupt-names = "edm3_tcerrint";
};
- serial0: serial@1c42000 {
+ serial0: serial@42000 {
compatible = "ns16550a";
reg = <0x42000 0x100>;
reg-shift = <2>;
interrupts = <25>;
status = "disabled";
};
- serial1: serial@1d0c000 {
+ serial1: serial@10c000 {
compatible = "ns16550a";
reg = <0x10c000 0x100>;
reg-shift = <2>;
interrupts = <53>;
status = "disabled";
};
- serial2: serial@1d0d000 {
+ serial2: serial@10d000 {
compatible = "ns16550a";
reg = <0x10d000 0x100>;
reg-shift = <2>;
interrupts = <61>;
status = "disabled";
};
- rtc0: rtc@1c23000 {
+ rtc0: rtc@23000 {
compatible = "ti,da830-rtc";
reg = <0x23000 0x1000>;
interrupts = <19
19>;
status = "disabled";
};
- i2c0: i2c@1c22000 {
+ i2c0: i2c@22000 {
compatible = "ti,davinci-i2c";
reg = <0x22000 0x1000>;
interrupts = <15>;
@@ -226,12 +226,12 @@
#size-cells = <0>;
status = "disabled";
};
- wdt: wdt@1c21000 {
+ wdt: wdt@21000 {
compatible = "ti,davinci-wdt";
reg = <0x21000 0x1000>;
status = "disabled";
};
- mmc0: mmc@1c40000 {
+ mmc0: mmc@40000 {
compatible = "ti,da830-mmc";
reg = <0x40000 0x1000>;
interrupts = <16>;
@@ -239,7 +239,7 @@
dma-names = "rx", "tx";
status = "disabled";
};
- mmc1: mmc@1e1b000 {
+ mmc1: mmc@21b000 {
compatible = "ti,da830-mmc";
reg = <0x21b000 0x1000>;
interrupts = <72>;
@@ -247,37 +247,37 @@
dma-names = "rx", "tx";
status = "disabled";
};
- ehrpwm0: ehrpwm@01f00000 {
+ ehrpwm0: ehrpwm@300000 {
compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x300000 0x2000>;
status = "disabled";
};
- ehrpwm1: ehrpwm@01f02000 {
+ ehrpwm1: ehrpwm@302000 {
compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x302000 0x2000>;
status = "disabled";
};
- ecap0: ecap@01f06000 {
+ ecap0: ecap@306000 {
compatible = "ti,da850-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x306000 0x80>;
status = "disabled";
};
- ecap1: ecap@01f07000 {
+ ecap1: ecap@307000 {
compatible = "ti,da850-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x307000 0x80>;
status = "disabled";
};
- ecap2: ecap@01f08000 {
+ ecap2: ecap@308000 {
compatible = "ti,da850-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x308000 0x80>;
status = "disabled";
};
- spi1: spi@1f0e000 {
+ spi1: spi@30e000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,da830-spi";
@@ -289,13 +289,13 @@
dma-names = "rx", "tx";
status = "disabled";
};
- mdio: mdio@1e24000 {
+ mdio: mdio@224000 {
compatible = "ti,davinci_mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x224000 0x1000>;
};
- eth0: ethernet@1e20000 {
+ eth0: ethernet@220000 {
compatible = "ti,davinci-dm6467-emac";
reg = <0x220000 0x4000>;
ti,davinci-ctrl-reg-offset = <0x3000>;
@@ -309,7 +309,7 @@
36
>;
};
- gpio: gpio@1e26000 {
+ gpio: gpio@226000 {
compatible = "ti,dm6441-gpio";
gpio-controller;
reg = <0x226000 0x1000>;
@@ -323,7 +323,7 @@
status = "disabled";
};
- mcasp0: mcasp@01d00000 {
+ mcasp0: mcasp@100000 {
compatible = "ti,da830-mcasp-audio";
reg = <0x100000 0x2000>,
<0x102000 0x400000>;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 1/3] dt: davinci: use proper address after @
@ 2016-04-01 15:42 ` Petr Kulhavy
0 siblings, 0 replies; 16+ messages in thread
From: Petr Kulhavy @ 2016-04-01 15:42 UTC (permalink / raw
To: linux-arm-kernel
From: David Lechner <david@lechnology.com>
TI has been using the physical address in DT after the @ in device nodes.
The device tree convention is to use the same address that is used for
the reg property. This updates all davinci DT files to use the proper
convention.
Signed-off-by: David Lechner <david@lechnology.com>
Acked-by: Rob Herring <robh@kernel.org>
---
arch/arm/boot/dts/da850-enbw-cmc.dts | 8 +++---
arch/arm/boot/dts/da850-evm.dts | 26 +++++++++---------
arch/arm/boot/dts/da850.dtsi | 52 ++++++++++++++++++------------------
3 files changed, 43 insertions(+), 43 deletions(-)
diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts
index 645549e14237..101d1a16b0ac 100644
--- a/arch/arm/boot/dts/da850-enbw-cmc.dts
+++ b/arch/arm/boot/dts/da850-enbw-cmc.dts
@@ -16,14 +16,14 @@
compatible = "enbw,cmc", "ti,da850";
model = "EnBW CMC";
- soc {
- serial0: serial at 1c42000 {
+ soc at 1c00000 {
+ serial0: serial at 42000 {
status = "okay";
};
- serial1: serial at 1d0c000 {
+ serial1: serial at 10c000 {
status = "okay";
};
- serial2: serial at 1d0d000 {
+ serial2: serial at 10d000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index ef061e9a2315..1a15db8e376b 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -14,8 +14,8 @@
compatible = "ti,da850-evm", "ti,da850";
model = "DA850/AM1808/OMAP-L138 EVM";
- soc {
- pmx_core: pinmux at 1c14120 {
+ soc at 1c00000 {
+ pmx_core: pinmux at 14120 {
status = "okay";
mcasp0_pins: pinmux_mcasp0_pins {
@@ -30,19 +30,19 @@
>;
};
};
- serial0: serial at 1c42000 {
+ serial0: serial at 42000 {
status = "okay";
};
- serial1: serial at 1d0c000 {
+ serial1: serial at 10c000 {
status = "okay";
};
- serial2: serial at 1d0d000 {
+ serial2: serial at 10d000 {
status = "okay";
};
- rtc0: rtc at 1c23000 {
+ rtc0: rtc at 23000 {
status = "okay";
};
- i2c0: i2c at 1c22000 {
+ i2c0: i2c at 22000 {
status = "okay";
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -66,17 +66,17 @@
};
};
- wdt: wdt at 1c21000 {
+ wdt: wdt at 21000 {
status = "okay";
};
- mmc0: mmc at 1c40000 {
+ mmc0: mmc at 40000 {
max-frequency = <50000000>;
bus-width = <4>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
};
- spi1: spi at 1f0e000 {
+ spi1: spi at 30e000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
@@ -116,18 +116,18 @@
};
};
};
- mdio: mdio at 1e24000 {
+ mdio: mdio at 224000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;
bus_freq = <2200000>;
};
- eth0: ethernet at 1e20000 {
+ eth0: ethernet at 220000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mii_pins>;
};
- gpio: gpio at 1e26000 {
+ gpio: gpio at 226000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 226cda76e77c..42948496b8f7 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -15,7 +15,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges;
- intc: interrupt-controller {
+ intc: interrupt-controller at fffee000 {
compatible = "ti,cp-intc";
interrupt-controller;
#interrupt-cells = <1>;
@@ -23,7 +23,7 @@
reg = <0xfffee000 0x2000>;
};
};
- soc {
+ soc at 1c00000 {
compatible = "simple-bus";
model = "da850";
#address-cells = <1>;
@@ -31,7 +31,7 @@
ranges = <0x0 0x01c00000 0x400000>;
interrupt-parent = <&intc>;
- pmx_core: pinmux at 1c14120 {
+ pmx_core: pinmux at 14120 {
compatible = "pinctrl-single";
reg = <0x14120 0x50>;
#address-cells = <1>;
@@ -150,7 +150,7 @@
};
};
- edma0: edma at 01c00000 {
+ edma0: edma at 0 {
compatible = "ti,edma3-tpcc";
/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
reg = <0x0 0x8000>;
@@ -161,19 +161,19 @@
ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
};
- edma0_tptc0: tptc at 01c08000 {
+ edma0_tptc0: tptc at 8000 {
compatible = "ti,edma3-tptc";
reg = <0x8000 0x400>;
interrupts = <13>;
interrupt-names = "edm3_tcerrint";
};
- edma0_tptc1: tptc at 01c08400 {
+ edma0_tptc1: tptc at 8400 {
compatible = "ti,edma3-tptc";
reg = <0x8400 0x400>;
interrupts = <32>;
interrupt-names = "edm3_tcerrint";
};
- edma1: edma at 01e30000 {
+ edma1: edma at 230000 {
compatible = "ti,edma3-tpcc";
/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
reg = <0x230000 0x8000>;
@@ -184,41 +184,41 @@
ti,tptcs = <&edma1_tptc0 7>;
};
- edma1_tptc0: tptc at 01e38000 {
+ edma1_tptc0: tptc at 238000 {
compatible = "ti,edma3-tptc";
reg = <0x238000 0x400>;
interrupts = <95>;
interrupt-names = "edm3_tcerrint";
};
- serial0: serial at 1c42000 {
+ serial0: serial at 42000 {
compatible = "ns16550a";
reg = <0x42000 0x100>;
reg-shift = <2>;
interrupts = <25>;
status = "disabled";
};
- serial1: serial at 1d0c000 {
+ serial1: serial at 10c000 {
compatible = "ns16550a";
reg = <0x10c000 0x100>;
reg-shift = <2>;
interrupts = <53>;
status = "disabled";
};
- serial2: serial at 1d0d000 {
+ serial2: serial at 10d000 {
compatible = "ns16550a";
reg = <0x10d000 0x100>;
reg-shift = <2>;
interrupts = <61>;
status = "disabled";
};
- rtc0: rtc at 1c23000 {
+ rtc0: rtc at 23000 {
compatible = "ti,da830-rtc";
reg = <0x23000 0x1000>;
interrupts = <19
19>;
status = "disabled";
};
- i2c0: i2c at 1c22000 {
+ i2c0: i2c at 22000 {
compatible = "ti,davinci-i2c";
reg = <0x22000 0x1000>;
interrupts = <15>;
@@ -226,12 +226,12 @@
#size-cells = <0>;
status = "disabled";
};
- wdt: wdt at 1c21000 {
+ wdt: wdt at 21000 {
compatible = "ti,davinci-wdt";
reg = <0x21000 0x1000>;
status = "disabled";
};
- mmc0: mmc at 1c40000 {
+ mmc0: mmc at 40000 {
compatible = "ti,da830-mmc";
reg = <0x40000 0x1000>;
interrupts = <16>;
@@ -239,7 +239,7 @@
dma-names = "rx", "tx";
status = "disabled";
};
- mmc1: mmc at 1e1b000 {
+ mmc1: mmc at 21b000 {
compatible = "ti,da830-mmc";
reg = <0x21b000 0x1000>;
interrupts = <72>;
@@ -247,37 +247,37 @@
dma-names = "rx", "tx";
status = "disabled";
};
- ehrpwm0: ehrpwm at 01f00000 {
+ ehrpwm0: ehrpwm at 300000 {
compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x300000 0x2000>;
status = "disabled";
};
- ehrpwm1: ehrpwm at 01f02000 {
+ ehrpwm1: ehrpwm at 302000 {
compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x302000 0x2000>;
status = "disabled";
};
- ecap0: ecap at 01f06000 {
+ ecap0: ecap at 306000 {
compatible = "ti,da850-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x306000 0x80>;
status = "disabled";
};
- ecap1: ecap at 01f07000 {
+ ecap1: ecap at 307000 {
compatible = "ti,da850-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x307000 0x80>;
status = "disabled";
};
- ecap2: ecap at 01f08000 {
+ ecap2: ecap at 308000 {
compatible = "ti,da850-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x308000 0x80>;
status = "disabled";
};
- spi1: spi at 1f0e000 {
+ spi1: spi at 30e000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,da830-spi";
@@ -289,13 +289,13 @@
dma-names = "rx", "tx";
status = "disabled";
};
- mdio: mdio at 1e24000 {
+ mdio: mdio at 224000 {
compatible = "ti,davinci_mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x224000 0x1000>;
};
- eth0: ethernet at 1e20000 {
+ eth0: ethernet at 220000 {
compatible = "ti,davinci-dm6467-emac";
reg = <0x220000 0x4000>;
ti,davinci-ctrl-reg-offset = <0x3000>;
@@ -309,7 +309,7 @@
36
>;
};
- gpio: gpio at 1e26000 {
+ gpio: gpio at 226000 {
compatible = "ti,dm6441-gpio";
gpio-controller;
reg = <0x226000 0x1000>;
@@ -323,7 +323,7 @@
status = "disabled";
};
- mcasp0: mcasp at 01d00000 {
+ mcasp0: mcasp at 100000 {
compatible = "ti,da830-mcasp-audio";
reg = <0x100000 0x2000>,
<0x102000 0x400000>;
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 2/3] ARM: DTS: da850: add node for i2c1
2016-04-01 15:42 ` Petr Kulhavy
@ 2016-04-01 15:42 ` Petr Kulhavy
-1 siblings, 0 replies; 16+ messages in thread
From: Petr Kulhavy @ 2016-04-01 15:42 UTC (permalink / raw
To: nsekhar-l0cyMroinI0, khilman-DgEjT+Ai2ygdnm+yROfE0A,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, linux-lFZ/pmaqli7XmaaqVzeoHQ
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, david-nq/r/kbU++upp/zk7JDF2g,
Petr Kulhavy
da850 has two I2C controllers, but the node for i2c1 was missing.
Add node for i2c1 controller and i2c1 pinmux pins.
Signed-off-by: Petr Kulhavy <petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/da850.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 42948496b8f7..136c422204d3 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -63,6 +63,12 @@
0x10 0x00002200 0x0000ff00
>;
};
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,bits = <
+ /* I2C1_SDA,I2C1_SCL */
+ 0x10 0x00440000 0x00ff0000
+ >;
+ };
mmc0_pins: pinmux_mmc_pins {
pinctrl-single,bits = <
/* MMCSD0_DAT[3] MMCSD0_DAT[2]
@@ -226,6 +232,14 @@
#size-cells = <0>;
status = "disabled";
};
+ i2c1: i2c@228000 {
+ compatible = "ti,davinci-i2c";
+ reg = <0x228000 0x1000>;
+ interrupts = <51>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
wdt: wdt@21000 {
compatible = "ti,davinci-wdt";
reg = <0x21000 0x1000>;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 2/3] ARM: DTS: da850: add node for i2c1
@ 2016-04-01 15:42 ` Petr Kulhavy
0 siblings, 0 replies; 16+ messages in thread
From: Petr Kulhavy @ 2016-04-01 15:42 UTC (permalink / raw
To: linux-arm-kernel
da850 has two I2C controllers, but the node for i2c1 was missing.
Add node for i2c1 controller and i2c1 pinmux pins.
Signed-off-by: Petr Kulhavy <petr@barix.com>
---
arch/arm/boot/dts/da850.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 42948496b8f7..136c422204d3 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -63,6 +63,12 @@
0x10 0x00002200 0x0000ff00
>;
};
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,bits = <
+ /* I2C1_SDA,I2C1_SCL */
+ 0x10 0x00440000 0x00ff0000
+ >;
+ };
mmc0_pins: pinmux_mmc_pins {
pinctrl-single,bits = <
/* MMCSD0_DAT[3] MMCSD0_DAT[2]
@@ -226,6 +232,14 @@
#size-cells = <0>;
status = "disabled";
};
+ i2c1: i2c at 228000 {
+ compatible = "ti,davinci-i2c";
+ reg = <0x228000 0x1000>;
+ interrupts = <51>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
wdt: wdt at 21000 {
compatible = "ti,davinci-wdt";
reg = <0x21000 0x1000>;
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 3/3] ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for i2c1
2016-04-01 15:42 ` Petr Kulhavy
@ 2016-04-01 15:42 ` Petr Kulhavy
-1 siblings, 0 replies; 16+ messages in thread
From: Petr Kulhavy @ 2016-04-01 15:42 UTC (permalink / raw
To: nsekhar-l0cyMroinI0, khilman-DgEjT+Ai2ygdnm+yROfE0A,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, linux-lFZ/pmaqli7XmaaqVzeoHQ
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, david-nq/r/kbU++upp/zk7JDF2g,
Petr Kulhavy
Add OF_DEV_AUXDATA entry for second i2c on the da850 DT board driver
to use i2c clock.
Signed-off-by: Petr Kulhavy <petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
---
arch/arm/mach-davinci/da8xx-dt.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index c4b5808ca7c1..880b94e64816 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -32,6 +32,7 @@ static void __init da8xx_init_irq(void)
static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL),
+ OF_DEV_AUXDATA("ti,davinci-i2c", 0x01e28000, "i2c_davinci.2", NULL),
OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "davinci-wdt", NULL),
OF_DEV_AUXDATA("ti,da830-mmc", 0x01c40000, "da830-mmc.0", NULL),
OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f00000, "ehrpwm", NULL),
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH 3/3] ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for i2c1
@ 2016-04-01 15:42 ` Petr Kulhavy
0 siblings, 0 replies; 16+ messages in thread
From: Petr Kulhavy @ 2016-04-01 15:42 UTC (permalink / raw
To: linux-arm-kernel
Add OF_DEV_AUXDATA entry for second i2c on the da850 DT board driver
to use i2c clock.
Signed-off-by: Petr Kulhavy <petr@barix.com>
---
arch/arm/mach-davinci/da8xx-dt.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index c4b5808ca7c1..880b94e64816 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -32,6 +32,7 @@ static void __init da8xx_init_irq(void)
static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL),
+ OF_DEV_AUXDATA("ti,davinci-i2c", 0x01e28000, "i2c_davinci.2", NULL),
OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "davinci-wdt", NULL),
OF_DEV_AUXDATA("ti,da830-mmc", 0x01c40000, "da830-mmc.0", NULL),
OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f00000, "ehrpwm", NULL),
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH 1/3] dt: davinci: use proper address after @
2016-04-01 15:42 ` Petr Kulhavy
@ 2016-04-07 14:33 ` Sekhar Nori
-1 siblings, 0 replies; 16+ messages in thread
From: Sekhar Nori @ 2016-04-07 14:33 UTC (permalink / raw
To: Petr Kulhavy, khilman-DgEjT+Ai2ygdnm+yROfE0A,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, linux-lFZ/pmaqli7XmaaqVzeoHQ
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, david-nq/r/kbU++upp/zk7JDF2g
On Friday 01 April 2016 09:12 PM, Petr Kulhavy wrote:
> From: David Lechner <david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
>
> TI has been using the physical address in DT after the @ in device nodes.
> The device tree convention is to use the same address that is used for
> the reg property. This updates all davinci DT files to use the proper
> convention.
>
> Signed-off-by: David Lechner <david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Applied for v4.7. Fixed the subject prefix to "ARM: dts: davinci: " as
is the convention for device tree updates.
Regards,
Sekhar
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 1/3] dt: davinci: use proper address after @
@ 2016-04-07 14:33 ` Sekhar Nori
0 siblings, 0 replies; 16+ messages in thread
From: Sekhar Nori @ 2016-04-07 14:33 UTC (permalink / raw
To: linux-arm-kernel
On Friday 01 April 2016 09:12 PM, Petr Kulhavy wrote:
> From: David Lechner <david@lechnology.com>
>
> TI has been using the physical address in DT after the @ in device nodes.
> The device tree convention is to use the same address that is used for
> the reg property. This updates all davinci DT files to use the proper
> convention.
>
> Signed-off-by: David Lechner <david@lechnology.com>
> Acked-by: Rob Herring <robh@kernel.org>
Applied for v4.7. Fixed the subject prefix to "ARM: dts: davinci: " as
is the convention for device tree updates.
Regards,
Sekhar
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 2/3] ARM: DTS: da850: add node for i2c1
2016-04-01 15:42 ` Petr Kulhavy
@ 2016-04-07 14:51 ` Sekhar Nori
-1 siblings, 0 replies; 16+ messages in thread
From: Sekhar Nori @ 2016-04-07 14:51 UTC (permalink / raw
To: Petr Kulhavy, khilman-DgEjT+Ai2ygdnm+yROfE0A,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, linux-lFZ/pmaqli7XmaaqVzeoHQ
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, david-nq/r/kbU++upp/zk7JDF2g
On Friday 01 April 2016 09:12 PM, Petr Kulhavy wrote:
> da850 has two I2C controllers, but the node for i2c1 was missing.
> Add node for i2c1 controller and i2c1 pinmux pins.
>
> Signed-off-by: Petr Kulhavy <petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
> ---
> arch/arm/boot/dts/da850.dtsi | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
> index 42948496b8f7..136c422204d3 100644
> --- a/arch/arm/boot/dts/da850.dtsi
> +++ b/arch/arm/boot/dts/da850.dtsi
> @@ -63,6 +63,12 @@
> 0x10 0x00002200 0x0000ff00
> >;
> };
> + i2c1_pins: pinmux_i2c1_pins {
> + pinctrl-single,bits = <
> + /* I2C1_SDA,I2C1_SCL */
> + 0x10 0x00440000 0x00ff0000
Indented these two lines one tab like its done elsewhere in the file and
applied.
Thanks,
Sekhar
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 2/3] ARM: DTS: da850: add node for i2c1
@ 2016-04-07 14:51 ` Sekhar Nori
0 siblings, 0 replies; 16+ messages in thread
From: Sekhar Nori @ 2016-04-07 14:51 UTC (permalink / raw
To: linux-arm-kernel
On Friday 01 April 2016 09:12 PM, Petr Kulhavy wrote:
> da850 has two I2C controllers, but the node for i2c1 was missing.
> Add node for i2c1 controller and i2c1 pinmux pins.
>
> Signed-off-by: Petr Kulhavy <petr@barix.com>
> ---
> arch/arm/boot/dts/da850.dtsi | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
> index 42948496b8f7..136c422204d3 100644
> --- a/arch/arm/boot/dts/da850.dtsi
> +++ b/arch/arm/boot/dts/da850.dtsi
> @@ -63,6 +63,12 @@
> 0x10 0x00002200 0x0000ff00
> >;
> };
> + i2c1_pins: pinmux_i2c1_pins {
> + pinctrl-single,bits = <
> + /* I2C1_SDA,I2C1_SCL */
> + 0x10 0x00440000 0x00ff0000
Indented these two lines one tab like its done elsewhere in the file and
applied.
Thanks,
Sekhar
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 3/3] ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for i2c1
2016-04-01 15:42 ` Petr Kulhavy
@ 2016-04-07 14:53 ` Sekhar Nori
-1 siblings, 0 replies; 16+ messages in thread
From: Sekhar Nori @ 2016-04-07 14:53 UTC (permalink / raw
To: Petr Kulhavy, khilman-DgEjT+Ai2ygdnm+yROfE0A,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, linux-lFZ/pmaqli7XmaaqVzeoHQ
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, david-nq/r/kbU++upp/zk7JDF2g
On Friday 01 April 2016 09:12 PM, Petr Kulhavy wrote:
> Add OF_DEV_AUXDATA entry for second i2c on the da850 DT board driver
> to use i2c clock.
>
> Signed-off-by: Petr Kulhavy <petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
Applied.
Thanks,
Sekhar
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 3/3] ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for i2c1
@ 2016-04-07 14:53 ` Sekhar Nori
0 siblings, 0 replies; 16+ messages in thread
From: Sekhar Nori @ 2016-04-07 14:53 UTC (permalink / raw
To: linux-arm-kernel
On Friday 01 April 2016 09:12 PM, Petr Kulhavy wrote:
> Add OF_DEV_AUXDATA entry for second i2c on the da850 DT board driver
> to use i2c clock.
>
> Signed-off-by: Petr Kulhavy <petr@barix.com>
Applied.
Thanks,
Sekhar
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 1/3] dt: davinci: use proper address after @
2016-04-07 14:33 ` Sekhar Nori
@ 2016-04-07 15:05 ` Petr Kulhavy
-1 siblings, 0 replies; 16+ messages in thread
From: Petr Kulhavy @ 2016-04-07 15:05 UTC (permalink / raw
To: Sekhar Nori, khilman-DgEjT+Ai2ygdnm+yROfE0A,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, linux-lFZ/pmaqli7XmaaqVzeoHQ
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, david-nq/r/kbU++upp/zk7JDF2g
On 07.04.2016 16:33, Sekhar Nori wrote:
> On Friday 01 April 2016 09:12 PM, Petr Kulhavy wrote:
>> From: David Lechner <david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
>>
>> TI has been using the physical address in DT after the @ in device nodes.
>> The device tree convention is to use the same address that is used for
>> the reg property. This updates all davinci DT files to use the proper
>> convention.
>>
>> Signed-off-by: David Lechner <david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
>> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Applied for v4.7. Fixed the subject prefix to "ARM: dts: davinci: " as
> is the convention for device tree updates.
>
> Regards,
> Sekhar
>
Thanks, Sekhar for applying the series.
Regards
Petr
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 1/3] dt: davinci: use proper address after @
@ 2016-04-07 15:05 ` Petr Kulhavy
0 siblings, 0 replies; 16+ messages in thread
From: Petr Kulhavy @ 2016-04-07 15:05 UTC (permalink / raw
To: linux-arm-kernel
On 07.04.2016 16:33, Sekhar Nori wrote:
> On Friday 01 April 2016 09:12 PM, Petr Kulhavy wrote:
>> From: David Lechner <david@lechnology.com>
>>
>> TI has been using the physical address in DT after the @ in device nodes.
>> The device tree convention is to use the same address that is used for
>> the reg property. This updates all davinci DT files to use the proper
>> convention.
>>
>> Signed-off-by: David Lechner <david@lechnology.com>
>> Acked-by: Rob Herring <robh@kernel.org>
> Applied for v4.7. Fixed the subject prefix to "ARM: dts: davinci: " as
> is the convention for device tree updates.
>
> Regards,
> Sekhar
>
Thanks, Sekhar for applying the series.
Regards
Petr
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2016-04-07 15:05 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-04-01 15:42 [PATCH 0/3] ARM: DTS: da850: add node for i2c1 Petr Kulhavy
2016-04-01 15:42 ` Petr Kulhavy
[not found] ` <1459525325-25470-1-git-send-email-petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
2016-04-01 15:42 ` [PATCH 1/3] dt: davinci: use proper address after @ Petr Kulhavy
2016-04-01 15:42 ` Petr Kulhavy
[not found] ` <1459525325-25470-2-git-send-email-petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
2016-04-07 14:33 ` Sekhar Nori
2016-04-07 14:33 ` Sekhar Nori
[not found] ` <57066FC7.1030706-l0cyMroinI0@public.gmane.org>
2016-04-07 15:05 ` Petr Kulhavy
2016-04-07 15:05 ` Petr Kulhavy
2016-04-01 15:42 ` [PATCH 2/3] ARM: DTS: da850: add node for i2c1 Petr Kulhavy
2016-04-01 15:42 ` Petr Kulhavy
[not found] ` <1459525325-25470-3-git-send-email-petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
2016-04-07 14:51 ` Sekhar Nori
2016-04-07 14:51 ` Sekhar Nori
2016-04-01 15:42 ` [PATCH 3/3] ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry " Petr Kulhavy
2016-04-01 15:42 ` Petr Kulhavy
[not found] ` <1459525325-25470-4-git-send-email-petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org>
2016-04-07 14:53 ` Sekhar Nori
2016-04-07 14:53 ` Sekhar Nori
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.