* [PATCH 0/2] ARM: dts: r8a7773/gose: enable SATA
@ 2016-03-16 17:11 Ulrich Hecht
2016-03-16 17:11 ` [PATCH 1/2] ARM: dts: r8a7793: Add SATA controller node Ulrich Hecht
2016-03-16 17:11 ` [PATCH 2/2] ARM: dts: gose: Enable SATA controller Ulrich Hecht
0 siblings, 2 replies; 4+ messages in thread
From: Ulrich Hecht @ 2016-03-16 17:11 UTC (permalink / raw
To: horms; +Cc: linux-renesas-soc, linux-ide, magnus.damm, Ulrich Hecht
Hi!
This enables SATA on the Gose board.
CU
Uli
Ulrich Hecht (2):
ARM: dts: r8a7793: Add SATA controller node
ARM: dts: gose: Enable SATA controller
arch/arm/boot/dts/r8a7793-gose.dts | 4 ++++
arch/arm/boot/dts/r8a7793.dtsi | 16 ++++++++++++++++
2 files changed, 20 insertions(+)
--
2.6.4
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 1/2] ARM: dts: r8a7793: Add SATA controller node
2016-03-16 17:11 [PATCH 0/2] ARM: dts: r8a7773/gose: enable SATA Ulrich Hecht
@ 2016-03-16 17:11 ` Ulrich Hecht
2016-03-17 1:23 ` Simon Horman
2016-03-16 17:11 ` [PATCH 2/2] ARM: dts: gose: Enable SATA controller Ulrich Hecht
1 sibling, 1 reply; 4+ messages in thread
From: Ulrich Hecht @ 2016-03-16 17:11 UTC (permalink / raw
To: horms; +Cc: linux-renesas-soc, linux-ide, magnus.damm, Ulrich Hecht
Adds SATA device node to r8a7793.dtsi.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
---
arch/arm/boot/dts/r8a7793.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 3ebe7d4..abb6851 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -775,6 +775,22 @@
status = "disabled";
};
+ sata0: sata@ee300000 {
+ compatible = "renesas,sata-r8a7793";
+ reg = <0 0xee300000 0 0x2000>;
+ interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7793_CLK_SATA0>;
+ status = "disabled";
+ };
+
+ sata1: sata@ee500000 {
+ compatible = "renesas,sata-r8a7793";
+ reg = <0 0xee500000 0 0x2000>;
+ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7793_CLK_SATA1>;
+ status = "disabled";
+ };
+
qspi: spi@e6b10000 {
compatible = "renesas,qspi-r8a7793", "renesas,qspi";
reg = <0 0xe6b10000 0 0x2c>;
--
2.6.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/2] ARM: dts: gose: Enable SATA controller
2016-03-16 17:11 [PATCH 0/2] ARM: dts: r8a7773/gose: enable SATA Ulrich Hecht
2016-03-16 17:11 ` [PATCH 1/2] ARM: dts: r8a7793: Add SATA controller node Ulrich Hecht
@ 2016-03-16 17:11 ` Ulrich Hecht
1 sibling, 0 replies; 4+ messages in thread
From: Ulrich Hecht @ 2016-03-16 17:11 UTC (permalink / raw
To: horms; +Cc: linux-renesas-soc, linux-ide, magnus.damm, Ulrich Hecht
Turns on r8a7793 SATA on the Gose board.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
---
arch/arm/boot/dts/r8a7793-gose.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 87e89ec..b7e8bd9 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -310,6 +310,10 @@
status = "okay";
};
+&sata0 {
+ status = "okay";
+};
+
&scif0 {
pinctrl-0 = <&scif0_pins>;
pinctrl-names = "default";
--
2.6.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 1/2] ARM: dts: r8a7793: Add SATA controller node
2016-03-16 17:11 ` [PATCH 1/2] ARM: dts: r8a7793: Add SATA controller node Ulrich Hecht
@ 2016-03-17 1:23 ` Simon Horman
0 siblings, 0 replies; 4+ messages in thread
From: Simon Horman @ 2016-03-17 1:23 UTC (permalink / raw
To: Ulrich Hecht; +Cc: linux-renesas-soc, linux-ide, magnus.damm
On Wed, Mar 16, 2016 at 06:11:07PM +0100, Ulrich Hecht wrote:
> Adds SATA device node to r8a7793.dtsi.
>
> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
> ---
> arch/arm/boot/dts/r8a7793.dtsi | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
> index 3ebe7d4..abb6851 100644
> --- a/arch/arm/boot/dts/r8a7793.dtsi
> +++ b/arch/arm/boot/dts/r8a7793.dtsi
> @@ -775,6 +775,22 @@
> status = "disabled";
> };
>
> + sata0: sata@ee300000 {
> + compatible = "renesas,sata-r8a7793";
> + reg = <0 0xee300000 0 0x2000>;
> + interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp8_clks R8A7793_CLK_SATA0>;
I think you also need a power domains property:
power-domains = <&cpg_clocks>;
> + status = "disabled";
> + };
> +
> + sata1: sata@ee500000 {
> + compatible = "renesas,sata-r8a7793";
> + reg = <0 0xee500000 0 0x2000>;
> + interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp8_clks R8A7793_CLK_SATA1>;
Here too.
> + status = "disabled";
> + };
> +
> qspi: spi@e6b10000 {
> compatible = "renesas,qspi-r8a7793", "renesas,qspi";
> reg = <0 0xe6b10000 0 0x2c>;
> --
> 2.6.4
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-03-17 1:23 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-03-16 17:11 [PATCH 0/2] ARM: dts: r8a7773/gose: enable SATA Ulrich Hecht
2016-03-16 17:11 ` [PATCH 1/2] ARM: dts: r8a7793: Add SATA controller node Ulrich Hecht
2016-03-17 1:23 ` Simon Horman
2016-03-16 17:11 ` [PATCH 2/2] ARM: dts: gose: Enable SATA controller Ulrich Hecht
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.