* [PATCH] fb: fix au1100fb bitrot.
@ 2011-09-30 18:49 Manuel Lauss
0 siblings, 0 replies; 2+ messages in thread
From: Manuel Lauss @ 2011-09-30 18:49 UTC (permalink / raw
To: linux-fbdev
Removes some bitrot from the au1100fb driver and fix it up so it works again.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
---
Tested on a DB1100 board.
drivers/video/au1100fb.c | 181 +++++++++++++++-------------------------------
drivers/video/au1100fb.h | 6 +--
2 files changed, 61 insertions(+), 126 deletions(-)
diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index 93b98bb..de9da67 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -98,12 +98,6 @@ static struct fb_var_screeninfo au1100fb_var __devinitdata = {
.vmode = FB_VMODE_NONINTERLACED,
};
-static struct au1100fb_drv_info drv_info;
-
-static int nocursor = 0;
-module_param(nocursor, int, 0644);
-MODULE_PARM_DESC(nocursor, "cursor enable/disable");
-
/* fb_blank
* Blank the screen. Depending on the mode, the screen will be
* activated with the backlight color, or desactivated
@@ -120,7 +114,7 @@ static int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
/* Turn on panel */
fbdev->regs->lcd_control |= LCD_CONTROL_GO;
#ifdef CONFIG_MIPS_PB1100
- if (drv_info.panel_idx = 1) {
+ if (fbdev->panel_idx = 1) {
au_writew(au_readw(PB1100_G_CONTROL)
| (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
PB1100_G_CONTROL);
@@ -135,7 +129,7 @@ static int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
/* Turn off panel */
fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
#ifdef CONFIG_MIPS_PB1100
- if (drv_info.panel_idx = 1) {
+ if (fbdev->panel_idx = 1) {
au_writew(au_readw(PB1100_G_CONTROL)
& ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
PB1100_G_CONTROL);
@@ -416,17 +410,6 @@ int au1100fb_fb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
return 0;
}
-/* fb_cursor
- * Used to disable cursor drawing...
- */
-int au1100fb_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
-{
- if (nocursor)
- return 0;
- else
- return -EINVAL; /* just to force soft_cursor() call */
-}
-
static struct fb_ops au1100fb_ops {
.owner = THIS_MODULE,
@@ -438,13 +421,53 @@ static struct fb_ops au1100fb_ops .fb_imageblit = cfb_imageblit,
.fb_rotate = au1100fb_fb_rotate,
.fb_mmap = au1100fb_fb_mmap,
- .fb_cursor = au1100fb_fb_cursor,
};
/*-------------------------------------------------------------------------*/
-/* AU1100 LCD controller device driver */
+static int au1100fb_setup(struct au1100fb_device *fbdev)
+{
+ char *this_opt, *options;
+ int num_panels = ARRAY_SIZE(known_lcd_panels);
+
+ if (num_panels <= 0) {
+ print_err("No LCD panels supported by driver!");
+ return -ENODEV;
+ }
+
+ if (fb_get_options(DRIVER_NAME, &options))
+ return -ENODEV;
+ if (!options)
+ return -ENODEV;
+
+ while ((this_opt = strsep(&options, ",")) != NULL) {
+ /* Panel option */
+ if (!strncmp(this_opt, "panel:", 6)) {
+ int i;
+ this_opt += 6;
+ for (i = 0; i < num_panels; i++) {
+ if (!strncmp(this_opt, known_lcd_panels[i].name,
+ strlen(this_opt))) {
+ fbdev->panel = &known_lcd_panels[i];
+ fbdev->panel_idx = i;
+ break;
+ }
+ }
+ if (i >= num_panels) {
+ print_warn("Panel '%s' not supported!", this_opt);
+ return -ENODEV;
+ }
+ }
+ /* Unsupported option */
+ else
+ print_warn("Unsupported option \"%s\"", this_opt);
+ }
+
+ print_info("Panel=%s", fbdev->panel->name);
+
+ return 0;
+}
static int __devinit au1100fb_drv_probe(struct platform_device *dev)
{
@@ -453,22 +476,21 @@ static int __devinit au1100fb_drv_probe(struct platform_device *dev)
unsigned long page;
u32 sys_clksrc;
- if (!dev)
- return -EINVAL;
-
/* Allocate new device private */
- if (!(fbdev = kzalloc(sizeof(struct au1100fb_device), GFP_KERNEL))) {
+ fbdev = kzalloc(sizeof(struct au1100fb_device), GFP_KERNEL);
+ if (!fbdev) {
print_err("fail to allocate device private record");
return -ENOMEM;
}
- fbdev->panel = &known_lcd_panels[drv_info.panel_idx];
+ if (au1100fb_setup(fbdev))
+ goto failed;
platform_set_drvdata(dev, (void *)fbdev);
/* Allocate region for our registers and map them */
- if (!(regs_res = platform_get_resource(to_platform_device(dev),
- IORESOURCE_MEM, 0))) {
+ regs_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (!regs_res) {
print_err("fail to retrieve registers resource");
return -EFAULT;
}
@@ -488,13 +510,11 @@ static int __devinit au1100fb_drv_probe(struct platform_device *dev)
print_dbg("Register memory map at %p", fbdev->regs);
print_dbg("phys=0x%08x, size=%d", fbdev->regs_phys, fbdev->regs_len);
-
-
/* Allocate the framebuffer to the maximum screen size * nbr of video buffers */
fbdev->fb_len = fbdev->panel->xres * fbdev->panel->yres *
(fbdev->panel->bpp >> 3) * AU1100FB_NBR_VIDEO_BUFFERS;
- fbdev->fb_mem = dma_alloc_coherent(dev, PAGE_ALIGN(fbdev->fb_len),
+ fbdev->fb_mem = dma_alloc_coherent(&dev->dev, PAGE_ALIGN(fbdev->fb_len),
&fbdev->fb_phys, GFP_KERNEL);
if (!fbdev->fb_mem) {
print_err("fail to allocate frambuffer (size: %dK))",
@@ -513,7 +533,7 @@ static int __devinit au1100fb_drv_probe(struct platform_device *dev)
page < PAGE_ALIGN((unsigned long)fbdev->fb_mem + fbdev->fb_len);
page += PAGE_SIZE) {
#if CONFIG_DMA_NONCOHERENT
- SetPageReserved(virt_to_page(CAC_ADDR(page)));
+ SetPageReserved(virt_to_page(CAC_ADDR((void *)page)));
#else
SetPageReserved(virt_to_page(page));
#endif
@@ -566,7 +586,8 @@ failed:
release_mem_region(fbdev->regs_phys, fbdev->regs_len);
}
if (fbdev->fb_mem) {
- dma_free_noncoherent(dev, fbdev->fb_len, fbdev->fb_mem, fbdev->fb_phys);
+ dma_free_noncoherent(&dev->dev, fbdev->fb_len, fbdev->fb_mem,
+ fbdev->fb_phys);
}
if (fbdev->info.cmap.len != 0) {
fb_dealloc_cmap(&fbdev->info.cmap);
@@ -596,7 +617,8 @@ int au1100fb_drv_remove(struct platform_device *dev)
release_mem_region(fbdev->regs_phys, fbdev->regs_len);
- dma_free_coherent(dev, PAGE_ALIGN(fbdev->fb_len), fbdev->fb_mem, fbdev->fb_phys);
+ dma_free_coherent(&dev->dev, PAGE_ALIGN(fbdev->fb_len), fbdev->fb_mem,
+ fbdev->fb_phys);
fb_dealloc_cmap(&fbdev->info.cmap);
kfree(fbdev->info.pseudo_palette);
@@ -663,101 +685,18 @@ static struct platform_driver au1100fb_driver = {
.resume = au1100fb_drv_resume,
};
-/*-------------------------------------------------------------------------*/
-
-/* Kernel driver */
-
-int au1100fb_setup(char *options)
-{
- char* this_opt;
- int num_panels = ARRAY_SIZE(known_lcd_panels);
- char* mode = NULL;
- int panel_idx = 0;
-
- if (num_panels <= 0) {
- print_err("No LCD panels supported by driver!");
- return -EFAULT;
- }
-
- if (options) {
- while ((this_opt = strsep(&options,",")) != NULL) {
- /* Panel option */
- if (!strncmp(this_opt, "panel:", 6)) {
- int i;
- this_opt += 6;
- for (i = 0; i < num_panels; i++) {
- if (!strncmp(this_opt,
- known_lcd_panels[i].name,
- strlen(this_opt))) {
- panel_idx = i;
- break;
- }
- }
- if (i >= num_panels) {
- print_warn("Panel %s not supported!", this_opt);
- }
- }
- if (!strncmp(this_opt, "nocursor", 8)) {
- this_opt += 8;
- nocursor = 1;
- print_info("Cursor disabled");
- }
- /* Mode option (only option that start with digit) */
- else if (isdigit(this_opt[0])) {
- mode = kstrdup(this_opt, GFP_KERNEL);
- if (!mode) {
- print_err("memory allocation failed");
- return -ENOMEM;
- }
- }
- /* Unsupported option */
- else {
- print_warn("Unsupported option \"%s\"", this_opt);
- }
- }
- }
-
- drv_info.panel_idx = panel_idx;
- drv_info.opt_mode = mode;
-
- print_info("Panel=%s Mode=%s",
- known_lcd_panels[drv_info.panel_idx].name,
- drv_info.opt_mode ? drv_info.opt_mode : "default");
-
- return 0;
-}
-
-int __init au1100fb_init(void)
+static int __init au1100fb_load(void)
{
- char* options;
- int ret;
-
- print_info("" DRIVER_DESC "");
-
- memset(&drv_info, 0, sizeof(drv_info));
-
- if (fb_get_options(DRIVER_NAME, &options))
- return -ENODEV;
-
- /* Setup driver with options */
- ret = au1100fb_setup(options);
- if (ret < 0) {
- print_err("Fail to setup driver");
- return ret;
- }
-
return platform_driver_register(&au1100fb_driver);
}
-void __exit au1100fb_cleanup(void)
+static void __exit au1100fb_unload(void)
{
platform_driver_unregister(&au1100fb_driver);
-
- kfree(drv_info.opt_mode);
}
-module_init(au1100fb_init);
-module_exit(au1100fb_cleanup);
+module_init(au1100fb_load);
+module_exit(au1100fb_unload);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
diff --git a/drivers/video/au1100fb.h b/drivers/video/au1100fb.h
index 164fe2f..12d9642 100644
--- a/drivers/video/au1100fb.h
+++ b/drivers/video/au1100fb.h
@@ -108,6 +108,7 @@ struct au1100fb_device {
unsigned char* fb_mem; /* FrameBuffer memory map */
size_t fb_len;
dma_addr_t fb_phys;
+ int panel_idx;
};
/********************************************************************/
@@ -364,11 +365,6 @@ static struct au1100fb_panel known_lcd_panels[] },
};
-struct au1100fb_drv_info {
- int panel_idx;
- char *opt_mode;
-};
-
/********************************************************************/
/* Inline helpers */
--
1.7.6.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] fb: fix au1100fb bitrot.
@ 2011-10-04 20:23 Florian Tobias Schandinat
0 siblings, 0 replies; 2+ messages in thread
From: Florian Tobias Schandinat @ 2011-10-04 20:23 UTC (permalink / raw
To: linux-fbdev
On 09/30/2011 06:49 PM, Manuel Lauss wrote:
> Removes some bitrot from the au1100fb driver and fix it up so it works again.
>
> Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Applied.
Thanks,
Florian Tobias Schandinat
> ---
> Tested on a DB1100 board.
>
> drivers/video/au1100fb.c | 181 +++++++++++++++-------------------------------
> drivers/video/au1100fb.h | 6 +--
> 2 files changed, 61 insertions(+), 126 deletions(-)
>
> diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
> index 93b98bb..de9da67 100644
> --- a/drivers/video/au1100fb.c
> +++ b/drivers/video/au1100fb.c
> @@ -98,12 +98,6 @@ static struct fb_var_screeninfo au1100fb_var __devinitdata = {
> .vmode = FB_VMODE_NONINTERLACED,
> };
>
> -static struct au1100fb_drv_info drv_info;
> -
> -static int nocursor = 0;
> -module_param(nocursor, int, 0644);
> -MODULE_PARM_DESC(nocursor, "cursor enable/disable");
> -
> /* fb_blank
> * Blank the screen. Depending on the mode, the screen will be
> * activated with the backlight color, or desactivated
> @@ -120,7 +114,7 @@ static int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
> /* Turn on panel */
> fbdev->regs->lcd_control |= LCD_CONTROL_GO;
> #ifdef CONFIG_MIPS_PB1100
> - if (drv_info.panel_idx = 1) {
> + if (fbdev->panel_idx = 1) {
> au_writew(au_readw(PB1100_G_CONTROL)
> | (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
> PB1100_G_CONTROL);
> @@ -135,7 +129,7 @@ static int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
> /* Turn off panel */
> fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
> #ifdef CONFIG_MIPS_PB1100
> - if (drv_info.panel_idx = 1) {
> + if (fbdev->panel_idx = 1) {
> au_writew(au_readw(PB1100_G_CONTROL)
> & ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
> PB1100_G_CONTROL);
> @@ -416,17 +410,6 @@ int au1100fb_fb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
> return 0;
> }
>
> -/* fb_cursor
> - * Used to disable cursor drawing...
> - */
> -int au1100fb_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
> -{
> - if (nocursor)
> - return 0;
> - else
> - return -EINVAL; /* just to force soft_cursor() call */
> -}
> -
> static struct fb_ops au1100fb_ops > {
> .owner = THIS_MODULE,
> @@ -438,13 +421,53 @@ static struct fb_ops au1100fb_ops > .fb_imageblit = cfb_imageblit,
> .fb_rotate = au1100fb_fb_rotate,
> .fb_mmap = au1100fb_fb_mmap,
> - .fb_cursor = au1100fb_fb_cursor,
> };
>
>
> /*-------------------------------------------------------------------------*/
>
> -/* AU1100 LCD controller device driver */
> +static int au1100fb_setup(struct au1100fb_device *fbdev)
> +{
> + char *this_opt, *options;
> + int num_panels = ARRAY_SIZE(known_lcd_panels);
> +
> + if (num_panels <= 0) {
> + print_err("No LCD panels supported by driver!");
> + return -ENODEV;
> + }
> +
> + if (fb_get_options(DRIVER_NAME, &options))
> + return -ENODEV;
> + if (!options)
> + return -ENODEV;
> +
> + while ((this_opt = strsep(&options, ",")) != NULL) {
> + /* Panel option */
> + if (!strncmp(this_opt, "panel:", 6)) {
> + int i;
> + this_opt += 6;
> + for (i = 0; i < num_panels; i++) {
> + if (!strncmp(this_opt, known_lcd_panels[i].name,
> + strlen(this_opt))) {
> + fbdev->panel = &known_lcd_panels[i];
> + fbdev->panel_idx = i;
> + break;
> + }
> + }
> + if (i >= num_panels) {
> + print_warn("Panel '%s' not supported!", this_opt);
> + return -ENODEV;
> + }
> + }
> + /* Unsupported option */
> + else
> + print_warn("Unsupported option \"%s\"", this_opt);
> + }
> +
> + print_info("Panel=%s", fbdev->panel->name);
> +
> + return 0;
> +}
>
> static int __devinit au1100fb_drv_probe(struct platform_device *dev)
> {
> @@ -453,22 +476,21 @@ static int __devinit au1100fb_drv_probe(struct platform_device *dev)
> unsigned long page;
> u32 sys_clksrc;
>
> - if (!dev)
> - return -EINVAL;
> -
> /* Allocate new device private */
> - if (!(fbdev = kzalloc(sizeof(struct au1100fb_device), GFP_KERNEL))) {
> + fbdev = kzalloc(sizeof(struct au1100fb_device), GFP_KERNEL);
> + if (!fbdev) {
> print_err("fail to allocate device private record");
> return -ENOMEM;
> }
>
> - fbdev->panel = &known_lcd_panels[drv_info.panel_idx];
> + if (au1100fb_setup(fbdev))
> + goto failed;
>
> platform_set_drvdata(dev, (void *)fbdev);
>
> /* Allocate region for our registers and map them */
> - if (!(regs_res = platform_get_resource(to_platform_device(dev),
> - IORESOURCE_MEM, 0))) {
> + regs_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
> + if (!regs_res) {
> print_err("fail to retrieve registers resource");
> return -EFAULT;
> }
> @@ -488,13 +510,11 @@ static int __devinit au1100fb_drv_probe(struct platform_device *dev)
> print_dbg("Register memory map at %p", fbdev->regs);
> print_dbg("phys=0x%08x, size=%d", fbdev->regs_phys, fbdev->regs_len);
>
> -
> -
> /* Allocate the framebuffer to the maximum screen size * nbr of video buffers */
> fbdev->fb_len = fbdev->panel->xres * fbdev->panel->yres *
> (fbdev->panel->bpp >> 3) * AU1100FB_NBR_VIDEO_BUFFERS;
>
> - fbdev->fb_mem = dma_alloc_coherent(dev, PAGE_ALIGN(fbdev->fb_len),
> + fbdev->fb_mem = dma_alloc_coherent(&dev->dev, PAGE_ALIGN(fbdev->fb_len),
> &fbdev->fb_phys, GFP_KERNEL);
> if (!fbdev->fb_mem) {
> print_err("fail to allocate frambuffer (size: %dK))",
> @@ -513,7 +533,7 @@ static int __devinit au1100fb_drv_probe(struct platform_device *dev)
> page < PAGE_ALIGN((unsigned long)fbdev->fb_mem + fbdev->fb_len);
> page += PAGE_SIZE) {
> #if CONFIG_DMA_NONCOHERENT
> - SetPageReserved(virt_to_page(CAC_ADDR(page)));
> + SetPageReserved(virt_to_page(CAC_ADDR((void *)page)));
> #else
> SetPageReserved(virt_to_page(page));
> #endif
> @@ -566,7 +586,8 @@ failed:
> release_mem_region(fbdev->regs_phys, fbdev->regs_len);
> }
> if (fbdev->fb_mem) {
> - dma_free_noncoherent(dev, fbdev->fb_len, fbdev->fb_mem, fbdev->fb_phys);
> + dma_free_noncoherent(&dev->dev, fbdev->fb_len, fbdev->fb_mem,
> + fbdev->fb_phys);
> }
> if (fbdev->info.cmap.len != 0) {
> fb_dealloc_cmap(&fbdev->info.cmap);
> @@ -596,7 +617,8 @@ int au1100fb_drv_remove(struct platform_device *dev)
>
> release_mem_region(fbdev->regs_phys, fbdev->regs_len);
>
> - dma_free_coherent(dev, PAGE_ALIGN(fbdev->fb_len), fbdev->fb_mem, fbdev->fb_phys);
> + dma_free_coherent(&dev->dev, PAGE_ALIGN(fbdev->fb_len), fbdev->fb_mem,
> + fbdev->fb_phys);
>
> fb_dealloc_cmap(&fbdev->info.cmap);
> kfree(fbdev->info.pseudo_palette);
> @@ -663,101 +685,18 @@ static struct platform_driver au1100fb_driver = {
> .resume = au1100fb_drv_resume,
> };
>
> -/*-------------------------------------------------------------------------*/
> -
> -/* Kernel driver */
> -
> -int au1100fb_setup(char *options)
> -{
> - char* this_opt;
> - int num_panels = ARRAY_SIZE(known_lcd_panels);
> - char* mode = NULL;
> - int panel_idx = 0;
> -
> - if (num_panels <= 0) {
> - print_err("No LCD panels supported by driver!");
> - return -EFAULT;
> - }
> -
> - if (options) {
> - while ((this_opt = strsep(&options,",")) != NULL) {
> - /* Panel option */
> - if (!strncmp(this_opt, "panel:", 6)) {
> - int i;
> - this_opt += 6;
> - for (i = 0; i < num_panels; i++) {
> - if (!strncmp(this_opt,
> - known_lcd_panels[i].name,
> - strlen(this_opt))) {
> - panel_idx = i;
> - break;
> - }
> - }
> - if (i >= num_panels) {
> - print_warn("Panel %s not supported!", this_opt);
> - }
> - }
> - if (!strncmp(this_opt, "nocursor", 8)) {
> - this_opt += 8;
> - nocursor = 1;
> - print_info("Cursor disabled");
> - }
> - /* Mode option (only option that start with digit) */
> - else if (isdigit(this_opt[0])) {
> - mode = kstrdup(this_opt, GFP_KERNEL);
> - if (!mode) {
> - print_err("memory allocation failed");
> - return -ENOMEM;
> - }
> - }
> - /* Unsupported option */
> - else {
> - print_warn("Unsupported option \"%s\"", this_opt);
> - }
> - }
> - }
> -
> - drv_info.panel_idx = panel_idx;
> - drv_info.opt_mode = mode;
> -
> - print_info("Panel=%s Mode=%s",
> - known_lcd_panels[drv_info.panel_idx].name,
> - drv_info.opt_mode ? drv_info.opt_mode : "default");
> -
> - return 0;
> -}
> -
> -int __init au1100fb_init(void)
> +static int __init au1100fb_load(void)
> {
> - char* options;
> - int ret;
> -
> - print_info("" DRIVER_DESC "");
> -
> - memset(&drv_info, 0, sizeof(drv_info));
> -
> - if (fb_get_options(DRIVER_NAME, &options))
> - return -ENODEV;
> -
> - /* Setup driver with options */
> - ret = au1100fb_setup(options);
> - if (ret < 0) {
> - print_err("Fail to setup driver");
> - return ret;
> - }
> -
> return platform_driver_register(&au1100fb_driver);
> }
>
> -void __exit au1100fb_cleanup(void)
> +static void __exit au1100fb_unload(void)
> {
> platform_driver_unregister(&au1100fb_driver);
> -
> - kfree(drv_info.opt_mode);
> }
>
> -module_init(au1100fb_init);
> -module_exit(au1100fb_cleanup);
> +module_init(au1100fb_load);
> +module_exit(au1100fb_unload);
>
> MODULE_DESCRIPTION(DRIVER_DESC);
> MODULE_LICENSE("GPL");
> diff --git a/drivers/video/au1100fb.h b/drivers/video/au1100fb.h
> index 164fe2f..12d9642 100644
> --- a/drivers/video/au1100fb.h
> +++ b/drivers/video/au1100fb.h
> @@ -108,6 +108,7 @@ struct au1100fb_device {
> unsigned char* fb_mem; /* FrameBuffer memory map */
> size_t fb_len;
> dma_addr_t fb_phys;
> + int panel_idx;
> };
>
> /********************************************************************/
> @@ -364,11 +365,6 @@ static struct au1100fb_panel known_lcd_panels[] > },
> };
>
> -struct au1100fb_drv_info {
> - int panel_idx;
> - char *opt_mode;
> -};
> -
> /********************************************************************/
>
> /* Inline helpers */
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-10-04 20:23 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-09-30 18:49 [PATCH] fb: fix au1100fb bitrot Manuel Lauss
-- strict thread matches above, loose matches on Subject: below --
2011-10-04 20:23 Florian Tobias Schandinat
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.