All the mail mirrored from lore.kernel.org
 help / color / mirror / Atom feed
* [U-Boot] [PATCH] Blackfin: bf518f-ezbrd: don't require SPI logic all the time
@ 2010-12-09 10:40 Mike Frysinger
  2010-12-18 23:19 ` Wolfgang Denk
  2010-12-19 22:08 ` [U-Boot] [PATCH v2] " Mike Frysinger
  0 siblings, 2 replies; 3+ messages in thread
From: Mike Frysinger @ 2010-12-09 10:40 UTC (permalink / raw
  To: u-boot

Only the first run of boards had a ksz switch on it, so if building for a
newer silicon rev or SPI is disabled, don't bother checking for the ksz.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 board/bf518f-ezbrd/bf518f-ezbrd.c |   30 ++++++++++++++++++++++--------
 1 files changed, 22 insertions(+), 8 deletions(-)

diff --git a/board/bf518f-ezbrd/bf518f-ezbrd.c b/board/bf518f-ezbrd/bf518f-ezbrd.c
index ff1ac4c..4bd02ee 100644
--- a/board/bf518f-ezbrd/bf518f-ezbrd.c
+++ b/board/bf518f-ezbrd/bf518f-ezbrd.c
@@ -57,6 +57,13 @@ static void board_init_enetaddr(uchar *mac_addr)
 	eth_setenv_enetaddr("ethaddr", mac_addr);
 }
 
+/* Only the first run of boards had a KSZ switch */
+#if defined(CONFIG_BFIN_SPI) && __SILICON_REVISION__ == 0
+# define KSZ_POSSIBLE 1
+#else
+# define KSZ_POSSIBLE 0
+#endif
+
 #define KSZ_MAX_HZ    5000000
 
 #define KSZ_WRITE     0x02
@@ -109,17 +116,16 @@ static int ksz8893m_reset(struct spi_slave *slave)
 	return ret;
 }
 
-int board_eth_init(bd_t *bis)
+static int board_ksz_init(void)
 {
-	static bool switch_is_alive = false, phy_is_ksz = true;
-	int ret;
+	static bool switch_is_alive = false;
 
 	if (!switch_is_alive) {
 		struct spi_slave *slave = spi_setup_slave(0, 1, KSZ_MAX_HZ, SPI_MODE_3);
 		if (slave) {
 			if (!spi_claim_bus(slave)) {
-				phy_is_ksz = (ksz8893m_reg_read(slave, KSZ_REG_CHID) == 0x88);
-				ret = phy_is_ksz ? ksz8893m_reset(slave) : 0;
+				bool phy_is_ksz = (ksz8893m_reg_read(slave, KSZ_REG_CHID) == 0x88);
+				int ret = phy_is_ksz ? ksz8893m_reset(slave) : 0;
 				switch_is_alive = (ret == 0);
 				spi_release_bus(slave);
 			}
@@ -127,10 +133,18 @@ int board_eth_init(bd_t *bis)
 		}
 	}
 
-	if (switch_is_alive)
-		return bfin_EMAC_initialize(bis);
-	else
+	if (!switch_is_alive)
 		return -1;
+	else
+		return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	if (KSZ_POSSIBLE)
+		if (board_ksz_init() == -1)
+			return 0;
+	return bfin_EMAC_initialize(bis);
 }
 #endif
 
-- 
1.7.3.3

^ permalink raw reply related	[flat|nested] 3+ messages in thread

* [U-Boot] [PATCH] Blackfin: bf518f-ezbrd: don't require SPI logic all the time
  2010-12-09 10:40 [U-Boot] [PATCH] Blackfin: bf518f-ezbrd: don't require SPI logic all the time Mike Frysinger
@ 2010-12-18 23:19 ` Wolfgang Denk
  2010-12-19 22:08 ` [U-Boot] [PATCH v2] " Mike Frysinger
  1 sibling, 0 replies; 3+ messages in thread
From: Wolfgang Denk @ 2010-12-18 23:19 UTC (permalink / raw
  To: u-boot

Dear Mike Frysinger,

In message <1291891215-12374-1-git-send-email-vapier@gentoo.org> you wrote:
> Only the first run of boards had a ksz switch on it, so if building for a
> newer silicon rev or SPI is disabled, don't bother checking for the ksz.
> 
> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
...
> +	if (!switch_is_alive)
>  		return -1;
> +	else
> +		return 0;
> +}

Drop the else, and unindent the return 0;

> +int board_eth_init(bd_t *bis)
> +{
> +	if (KSZ_POSSIBLE)
> +		if (board_ksz_init() == -1)
> +			return 0;

Braces needed for multiline statements.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Computers are not intelligent.  They only think they are.

^ permalink raw reply	[flat|nested] 3+ messages in thread

* [U-Boot] [PATCH v2] Blackfin: bf518f-ezbrd: don't require SPI logic all the time
  2010-12-09 10:40 [U-Boot] [PATCH] Blackfin: bf518f-ezbrd: don't require SPI logic all the time Mike Frysinger
  2010-12-18 23:19 ` Wolfgang Denk
@ 2010-12-19 22:08 ` Mike Frysinger
  1 sibling, 0 replies; 3+ messages in thread
From: Mike Frysinger @ 2010-12-19 22:08 UTC (permalink / raw
  To: u-boot

Only the first run of boards had a ksz switch on it, so if building for a
newer silicon rev or SPI is disabled, don't bother checking for the ksz.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
v2
	- tweak style

 board/bf518f-ezbrd/bf518f-ezbrd.c |   30 +++++++++++++++++++++---------
 1 files changed, 21 insertions(+), 9 deletions(-)

diff --git a/board/bf518f-ezbrd/bf518f-ezbrd.c b/board/bf518f-ezbrd/bf518f-ezbrd.c
index ff1ac4c..6b455de 100644
--- a/board/bf518f-ezbrd/bf518f-ezbrd.c
+++ b/board/bf518f-ezbrd/bf518f-ezbrd.c
@@ -57,6 +57,13 @@ static void board_init_enetaddr(uchar *mac_addr)
 	eth_setenv_enetaddr("ethaddr", mac_addr);
 }
 
+/* Only the first run of boards had a KSZ switch */
+#if defined(CONFIG_BFIN_SPI) && __SILICON_REVISION__ == 0
+# define KSZ_POSSIBLE 1
+#else
+# define KSZ_POSSIBLE 0
+#endif
+
 #define KSZ_MAX_HZ    5000000
 
 #define KSZ_WRITE     0x02
@@ -109,17 +116,16 @@ static int ksz8893m_reset(struct spi_slave *slave)
 	return ret;
 }
 
-int board_eth_init(bd_t *bis)
+static bool board_ksz_init(void)
 {
-	static bool switch_is_alive = false, phy_is_ksz = true;
-	int ret;
+	static bool switch_is_alive = false;
 
 	if (!switch_is_alive) {
 		struct spi_slave *slave = spi_setup_slave(0, 1, KSZ_MAX_HZ, SPI_MODE_3);
 		if (slave) {
 			if (!spi_claim_bus(slave)) {
-				phy_is_ksz = (ksz8893m_reg_read(slave, KSZ_REG_CHID) == 0x88);
-				ret = phy_is_ksz ? ksz8893m_reset(slave) : 0;
+				bool phy_is_ksz = (ksz8893m_reg_read(slave, KSZ_REG_CHID) == 0x88);
+				int ret = phy_is_ksz ? ksz8893m_reset(slave) : 0;
 				switch_is_alive = (ret == 0);
 				spi_release_bus(slave);
 			}
@@ -127,10 +133,16 @@ int board_eth_init(bd_t *bis)
 		}
 	}
 
-	if (switch_is_alive)
-		return bfin_EMAC_initialize(bis);
-	else
-		return -1;
+	return switch_is_alive;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	if (KSZ_POSSIBLE) {
+		if (!board_ksz_init())
+			return 0;
+	}
+	return bfin_EMAC_initialize(bis);
 }
 #endif
 
-- 
1.7.3.4

^ permalink raw reply related	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2010-12-19 22:08 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-12-09 10:40 [U-Boot] [PATCH] Blackfin: bf518f-ezbrd: don't require SPI logic all the time Mike Frysinger
2010-12-18 23:19 ` Wolfgang Denk
2010-12-19 22:08 ` [U-Boot] [PATCH v2] " Mike Frysinger

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.