* [PATCH 0/2] mkfs.ubifs updates
@ 2009-05-25 6:26 Corentin Chary
2009-05-25 6:26 ` [PATCH 1/2] mkfs.ubifs: remove duplicated code Corentin Chary
0 siblings, 1 reply; 14+ messages in thread
From: Corentin Chary @ 2009-05-25 6:26 UTC (permalink / raw
To: linux-mtd; +Cc: Corentin Chary
Hi,
Two patchs this time.
The first one is trivial.
The second is the reworked patch to format UBI volume.
There is no support for erasing the volume if it's not empty,
it'll come later, when the first patch is merged.
Thanks,
Corentin Chary (2):
mkfs.ubifs: remove duplicated code
mkfs.ubifs: use libubi to format UBI volume
Makefile | 2 +-
mkfs.ubifs/Makefile | 5 +-
mkfs.ubifs/lpt.c | 10 ++--
mkfs.ubifs/mkfs.ubifs.c | 181 +++++++++++++++++++++++++++++++++++++----------
mkfs.ubifs/mkfs.ubifs.h | 4 +-
mkfs.ubifs/ubifs.h | 3 +
6 files changed, 160 insertions(+), 45 deletions(-)
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 1/2] mkfs.ubifs: remove duplicated code
2009-05-25 6:26 [PATCH 0/2] mkfs.ubifs updates Corentin Chary
@ 2009-05-25 6:26 ` Corentin Chary
2009-05-25 6:26 ` [PATCH 2/2] mkfs.ubifs: use libubi to format UBI volume Corentin Chary
2009-05-25 7:49 ` [PATCH 1/2] mkfs.ubifs: remove duplicated code Artem Bityutskiy
0 siblings, 2 replies; 14+ messages in thread
From: Corentin Chary @ 2009-05-25 6:26 UTC (permalink / raw
To: linux-mtd; +Cc: Corentin Chary
ino->uid = cpu_to_le32(st->st_uid);
ino->gid = cpu_to_le32(st->st_gid);
was present twice.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
---
mkfs.ubifs/mkfs.ubifs.c | 2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/mkfs.ubifs/mkfs.ubifs.c b/mkfs.ubifs/mkfs.ubifs.c
index ebebfae..c0c1c29 100644
--- a/mkfs.ubifs/mkfs.ubifs.c
+++ b/mkfs.ubifs/mkfs.ubifs.c
@@ -1011,8 +1011,6 @@ static int add_inode_with_data(struct stat *st, ino_t inum, void *data,
ino->mtime_nsec = 0;
ino->uid = cpu_to_le32(st->st_uid);
ino->gid = cpu_to_le32(st->st_gid);
- ino->uid = cpu_to_le32(st->st_uid);
- ino->gid = cpu_to_le32(st->st_gid);
ino->mode = cpu_to_le32(st->st_mode);
ino->flags = cpu_to_le32(use_flags);
ino->data_len = cpu_to_le32(data_len);
--
1.6.3.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 2/2] mkfs.ubifs: use libubi to format UBI volume
2009-05-25 6:26 ` [PATCH 1/2] mkfs.ubifs: remove duplicated code Corentin Chary
@ 2009-05-25 6:26 ` Corentin Chary
2009-05-25 7:58 ` Artem Bityutskiy
2009-05-25 7:49 ` [PATCH 1/2] mkfs.ubifs: remove duplicated code Artem Bityutskiy
1 sibling, 1 reply; 14+ messages in thread
From: Corentin Chary @ 2009-05-25 6:26 UTC (permalink / raw
To: linux-mtd; +Cc: Corentin Chary
libubi is now used to format directly UBI volume.
Typing mkfs.ubifs /dev/ubi0_0 is now possible.
dtypes should be ok as they are taken from UBIFS code.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
---
Makefile | 2 +-
mkfs.ubifs/Makefile | 5 +-
mkfs.ubifs/lpt.c | 10 ++--
mkfs.ubifs/mkfs.ubifs.c | 179 +++++++++++++++++++++++++++++++++++++---------
mkfs.ubifs/mkfs.ubifs.h | 4 +-
mkfs.ubifs/ubifs.h | 3 +
6 files changed, 160 insertions(+), 43 deletions(-)
diff --git a/Makefile b/Makefile
index 969ab87..577634f 100644
--- a/Makefile
+++ b/Makefile
@@ -7,7 +7,7 @@ ifeq ($(WITHOUT_XATTR), 1)
CPPFLAGS += -DWITHOUT_XATTR
endif
-SUBDIRS = mkfs.ubifs ubi-utils
+SUBDIRS = ubi-utils mkfs.ubifs
TARGETS = ftl_format flash_erase flash_eraseall nanddump doc_loadbios \
ftl_check mkfs.jffs2 flash_lock flash_unlock flash_info \
diff --git a/mkfs.ubifs/Makefile b/mkfs.ubifs/Makefile
index e5bf9ce..a678b0a 100644
--- a/mkfs.ubifs/Makefile
+++ b/mkfs.ubifs/Makefile
@@ -1,8 +1,11 @@
+
+CPPFLAGS += -I../include -I../ubi-utils/include
+
ALL_SOURCES=*.[ch] hashtable/*.[ch]
TARGETS = mkfs.ubifs
-LDLIBS_mkfs.ubifs = -lz -llzo2 -lm -luuid
+LDLIBS_mkfs.ubifs = -lz -llzo2 -lm -luuid -L../ubi-utils/ -lubi
include ../common.mk
diff --git a/mkfs.ubifs/lpt.c b/mkfs.ubifs/lpt.c
index f6d4352..60002ff 100644
--- a/mkfs.ubifs/lpt.c
+++ b/mkfs.ubifs/lpt.c
@@ -410,7 +410,7 @@ int create_lpt(struct ubifs_info *c)
alen = ALIGN(len, c->min_io_size);
set_ltab(c, lnum, c->leb_size - alen, alen - len);
memset(p, 0xff, alen - len);
- err = write_leb(lnum++, alen, buf);
+ err = write_leb(lnum++, alen, buf, UBI_SHORTTERM);
if (err)
goto out;
p = buf;
@@ -452,7 +452,7 @@ int create_lpt(struct ubifs_info *c)
set_ltab(c, lnum, c->leb_size - alen,
alen - len);
memset(p, 0xff, alen - len);
- err = write_leb(lnum++, alen, buf);
+ err = write_leb(lnum++, alen, buf, UBI_SHORTTERM);
if (err)
goto out;
p = buf;
@@ -499,7 +499,7 @@ int create_lpt(struct ubifs_info *c)
alen = ALIGN(len, c->min_io_size);
set_ltab(c, lnum, c->leb_size - alen, alen - len);
memset(p, 0xff, alen - len);
- err = write_leb(lnum++, alen, buf);
+ err = write_leb(lnum++, alen, buf, UBI_SHORTTERM);
if (err)
goto out;
p = buf;
@@ -522,7 +522,7 @@ int create_lpt(struct ubifs_info *c)
alen = ALIGN(len, c->min_io_size);
set_ltab(c, lnum, c->leb_size - alen, alen - len);
memset(p, 0xff, alen - len);
- err = write_leb(lnum++, alen, buf);
+ err = write_leb(lnum++, alen, buf, UBI_SHORTTERM);
if (err)
goto out;
p = buf;
@@ -542,7 +542,7 @@ int create_lpt(struct ubifs_info *c)
/* Write remaining buffer */
memset(p, 0xff, alen - len);
- err = write_leb(lnum, alen, buf);
+ err = write_leb(lnum, alen, buf, UBI_SHORTTERM);
if (err)
goto out;
diff --git a/mkfs.ubifs/mkfs.ubifs.c b/mkfs.ubifs/mkfs.ubifs.c
index c0c1c29..afaffb0 100644
--- a/mkfs.ubifs/mkfs.ubifs.c
+++ b/mkfs.ubifs/mkfs.ubifs.c
@@ -95,6 +95,7 @@ struct inum_mapping {
*/
struct ubifs_info info_;
static struct ubifs_info *c = &info_;
+static libubi_t ubi;
/* Debug levels are: 0 (none), 1 (statistics), 2 (files) ,3 (more details) */
int debug_level;
@@ -105,6 +106,7 @@ static int root_len;
static struct stat root_st;
static char *output;
static int out_fd;
+static int out_ubi;
static int squash_owner;
/* The 'head' (position) which nodes are written */
@@ -154,8 +156,15 @@ static const struct option longopts[] = {
};
static const char *helptext =
-"Usage: mkfs.ubifs [OPTIONS]\n"
+"Usage: mkfs.ubifs [OPTIONS] target\n"
"Make a UBIFS file system image from an existing directory tree\n\n"
+"Examples:\n"
+"Build file system from directory /opt/img, writting the result in the ubifs.img file\n"
+"\tmkfs.ubifs -m 512 -e 128KiB -c 100 -r /opt/img ubifs.img\n"
+"The same, but writting directly to an UBI volume\n"
+"\tmkfs.ubifs -r /opt/img /dev/ubi0_0\n"
+"Creating an empty UBIFS filesystem on an UBI volume\n"
+"\tmkfs.ubifs /dev/ubi0_0\n\n"
"Options:\n"
"-r, -d, --root=DIR build file system from directory DIR\n"
"-m, --min-io-size=SIZE minimum I/O unit size\n"
@@ -357,11 +366,9 @@ static int validate_options(void)
{
int tmp;
- if (!root)
- return err_msg("root directory was not specified");
if (!output)
- return err_msg("no output file specified");
- if (in_path(root, output))
+ return err_msg("no output file or UBI volume specified");
+ if (root && in_path(root, output))
return err_msg("output file cannot be in the UBIFS root "
"directory");
if (!is_power_of_2(c->min_io_size))
@@ -467,6 +474,28 @@ static long long get_bytes(const char *str)
return bytes;
}
+/**
+ * open_ubi - open the UBI volume.
+ * @node: name of the UBI volume character device to fetch information about
+ *
+ * Returns %0 in case of success and %-1 in case of failure
+ */
+static int open_ubi(const char *node)
+{
+ struct stat st;
+
+ if (stat(node, &st) || !S_ISCHR(st.st_mode))
+ return -1;
+
+ ubi = libubi_open();
+ if (!ubi)
+ return -1;
+ if (ubi_get_vol_info(ubi, node, &c->vi))
+ return -1;
+ if (ubi_get_dev_info1(ubi, c->vi.dev_num, &c->di))
+ return -1;
+ return 0;
+}
static int get_options(int argc, char**argv)
{
@@ -616,6 +645,20 @@ static int get_options(int argc, char**argv)
}
}
+ if (optind != argc && !output)
+ output = strdup(argv[optind]);
+ if (output)
+ out_ubi = !open_ubi(output);
+
+ if (out_ubi) {
+ c->min_io_size = c->di.min_io_size;
+ c->leb_size = c->vi.leb_size;
+ c->max_leb_cnt = c->vi.rsvd_lebs;
+ }
+
+ if (!output)
+ return err_msg("not output device or file specified");
+
if (c->min_io_size == -1)
return err_msg("min. I/O unit was not specified "
"(use -h for help)");
@@ -714,22 +757,26 @@ static void prepare_node(void *node, int len)
}
/**
- * write_leb - copy the image of a LEB to the output file.
+ * write_leb - copy the image of a LEB to the output target.
* @lnum: LEB number
* @len: length of data in the buffer
* @buf: buffer (must be at least c->leb_size bytes)
+ * @dtype: expected data type
*/
-int write_leb(int lnum, int len, void *buf)
+int write_leb(int lnum, int len, void *buf, int dtype)
{
off64_t pos = (off64_t)lnum * c->leb_size;
dbg_msg(3, "LEB %d len %d", lnum, len);
+ memset(buf + len, 0xff, c->leb_size - len);
+ if (out_ubi)
+ if (ubi_leb_change_start(ubi, out_fd, lnum, c->leb_size, dtype))
+ return sys_err_msg("ubi_leb_change_start failed");
+
if (lseek64(out_fd, pos, SEEK_SET) != pos)
return sys_err_msg("lseek64 failed seeking %lld",
(long long)pos);
- memset(buf + len, 0xff, c->leb_size - len);
-
if (write(out_fd, buf, c->leb_size) != c->leb_size)
return sys_err_msg("write failed writing %d bytes at pos %lld",
c->leb_size, (long long)pos);
@@ -738,12 +785,13 @@ int write_leb(int lnum, int len, void *buf)
}
/**
- * write_empty_leb - copy the image of an empty LEB to the output file.
+ * write_empty_leb - copy the image of an empty LEB to the output target.
* @lnum: LEB number
+ * @dtype: expected data type
*/
-static int write_empty_leb(int lnum)
+static int write_empty_leb(int lnum, int dtype)
{
- return write_leb(lnum, 0, leb_buf);
+ return write_leb(lnum, 0, leb_buf, dtype);
}
/**
@@ -790,8 +838,9 @@ static int do_pad(void *buf, int len)
* @node: node
* @len: node length
* @lnum: LEB number
+ * @dtype: expected data type
*/
-static int write_node(void *node, int len, int lnum)
+static int write_node(void *node, int len, int lnum, int dtype)
{
prepare_node(node, len);
@@ -799,7 +848,7 @@ static int write_node(void *node, int len, int lnum)
len = do_pad(leb_buf, len);
- return write_leb(lnum, len, leb_buf);
+ return write_leb(lnum, len, leb_buf, dtype);
}
/**
@@ -909,7 +958,7 @@ static int flush_nodes(void)
if (!head_offs)
return 0;
len = do_pad(leb_buf, head_offs);
- err = write_leb(head_lnum, len, leb_buf);
+ err = write_leb(head_lnum, len, leb_buf, UBI_UNKNOWN);
if (err)
return err;
set_lprops(head_lnum, head_offs, head_flags);
@@ -1581,14 +1630,20 @@ static int write_data(void)
{
int err;
- err = stat(root, &root_st);
- if (err)
- return sys_err_msg("bad root file-system directory '%s'", root);
+ if (root) {
+ err = stat(root, &root_st);
+ if (err)
+ return sys_err_msg("bad root file-system directory '%s'"
+ , root);
+ } else {
+ root_st.st_mtime = time(NULL);
+ root_st.st_atime = root_st.st_ctime = root_st.st_mtime;
+ }
root_st.st_uid = root_st.st_gid = 0;
root_st.st_mode = S_IFDIR | S_IRWXU | S_IRWXG | S_IRWXO;
head_flags = 0;
- err = add_directory(root, UBIFS_ROOT_INO, &root_st, 0);
+ err = add_directory(root, UBIFS_ROOT_INO, &root_st, !root);
if (err)
return err;
err = add_multi_linked_files();
@@ -1831,7 +1886,7 @@ static int set_gc_lnum(void)
int err;
c->gc_lnum = head_lnum++;
- err = write_empty_leb(c->gc_lnum);
+ err = write_empty_leb(c->gc_lnum, UBI_LONGTERM);
if (err)
return err;
set_lprops(c->gc_lnum, 0, 0);
@@ -1907,7 +1962,7 @@ static int write_super(void)
if (c->big_lpt)
sup.flags |= cpu_to_le32(UBIFS_FLG_BIGLPT);
- return write_node(&sup, UBIFS_SB_NODE_SZ, UBIFS_SB_LNUM);
+ return write_node(&sup, UBIFS_SB_NODE_SZ, UBIFS_SB_LNUM, UBI_LONGTERM);
}
/**
@@ -1950,11 +2005,13 @@ static int write_master(void)
mst.total_dark = cpu_to_le64(c->lst.total_dark);
mst.leb_cnt = cpu_to_le32(c->leb_cnt);
- err = write_node(&mst, UBIFS_MST_NODE_SZ, UBIFS_MST_LNUM);
+ err = write_node(&mst, UBIFS_MST_NODE_SZ, UBIFS_MST_LNUM,
+ UBI_SHORTTERM);
if (err)
return err;
- err = write_node(&mst, UBIFS_MST_NODE_SZ, UBIFS_MST_LNUM + 1);
+ err = write_node(&mst, UBIFS_MST_NODE_SZ, UBIFS_MST_LNUM + 1,
+ UBI_SHORTTERM);
if (err)
return err;
@@ -1974,14 +2031,14 @@ static int write_log(void)
cs.ch.node_type = UBIFS_CS_NODE;
cs.cmt_no = cpu_to_le64(0);
- err = write_node(&cs, UBIFS_CS_NODE_SZ, lnum);
+ err = write_node(&cs, UBIFS_CS_NODE_SZ, lnum, UBI_UNKNOWN);
if (err)
return err;
lnum += 1;
for (i = 1; i < c->log_lebs; i++, lnum++) {
- err = write_empty_leb(lnum);
+ err = write_empty_leb(lnum, UBI_UNKNOWN);
if (err)
return err;
}
@@ -2002,7 +2059,7 @@ static int write_lpt(void)
lnum = c->nhead_lnum + 1;
while (lnum <= c->lpt_last) {
- err = write_empty_leb(lnum++);
+ err = write_empty_leb(lnum++, UBI_SHORTTERM);
if (err)
return err;
}
@@ -2019,7 +2076,7 @@ static int write_orphan_area(void)
lnum = UBIFS_LOG_LNUM + c->log_lebs + c->lpt_lebs;
for (i = 0; i < c->orph_lebs; i++, lnum++) {
- err = write_empty_leb(lnum);
+ err = write_empty_leb(lnum, UBI_SHORTTERM);
if (err)
return err;
}
@@ -2027,24 +2084,76 @@ static int write_orphan_area(void)
}
/**
- * open_target - open the output file.
+ * check_volume_empty - check if the UBI volume is empty.
+ *
+ * This function checks if the UBI volume is empty by looking if its LEBs are
+ * mapped or not.
+ *
+ * Returns %0 in case of success, %1 is the volume is not empty,
+ * and a negative error code in case of failure.
+ */
+static int check_volume_empty(void)
+{
+ int lnum, err;
+
+ for (lnum = 0; lnum < c->vi.rsvd_lebs; lnum++) {
+ err = ubi_is_mapped(out_fd, lnum);
+ if (err < 0)
+ return err;
+ if (err == 1)
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * open_target - open the output target.
+ *
+ * Open the output target. The target can be an UBI volume
+ * or a file.
+ *
+ * Returns %0 in case of success and %-1 in case of failure.
*/
static int open_target(void)
{
- out_fd = open(output, O_CREAT | O_RDWR | O_TRUNC,
- S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
- if (out_fd == -1)
- return sys_err_msg("cannot create output file '%s'", output);
+ if (out_ubi) {
+ out_fd = open(output, O_RDWR | O_EXCL);
+
+ if (out_fd == -1)
+ return sys_err_msg("cannot open the UBI volume '%s'",
+ output);
+ if (ubi_set_property(out_fd, UBI_PROP_DIRECT_WRITE, 1))
+ return sys_err_msg("ubi_set_property failed");
+
+ if (check_volume_empty())
+ return err_msg("UBI volume is not empty");
+ } else {
+ out_fd = open(output, O_CREAT | O_RDWR | O_TRUNC,
+ S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+ if (out_fd == -1)
+ return sys_err_msg("cannot create output file '%s'",
+ output);
+ }
return 0;
}
+
/**
- * close_target - close the output file.
+ * close_target - close the output target.
+ *
+ * Close the output target. If the target was an UBI
+ * volume, also close libubi.
+ *
+ * Returns %0 in case of success and %-1 in case of failure.
*/
static int close_target(void)
{
- if (close(out_fd) == -1)
- return sys_err_msg("cannot close output file '%s'", output);
+ if (ubi)
+ libubi_close(ubi);
+ if (out_fd >= 0 && close(out_fd) == -1)
+ return sys_err_msg("cannot close the target '%s'", output);
+ if (output)
+ free(output);
return 0;
}
diff --git a/mkfs.ubifs/mkfs.ubifs.h b/mkfs.ubifs/mkfs.ubifs.h
index 6460bd5..16b34c7 100644
--- a/mkfs.ubifs/mkfs.ubifs.h
+++ b/mkfs.ubifs/mkfs.ubifs.h
@@ -46,7 +46,9 @@
#include <libgen.h>
#include <ctype.h>
#include <uuid/uuid.h>
+#include <sys/file.h>
+#include "libubi.h"
#include "crc32.h"
#include "defs.h"
#include "crc16.h"
@@ -128,7 +130,7 @@ extern struct ubifs_info info_;
struct hashtable_itr;
-int write_leb(int lnum, int len, void *buf);
+int write_leb(int lnum, int len, void *buf, int dtype);
int parse_devtable(const char *tbl_file);
struct path_htbl_element *devtbl_find_path(const char *path);
struct name_htbl_element *devtbl_find_name(struct path_htbl_element *ph_elt,
diff --git a/mkfs.ubifs/ubifs.h b/mkfs.ubifs/ubifs.h
index 79c7192..0535b6f 100644
--- a/mkfs.ubifs/ubifs.h
+++ b/mkfs.ubifs/ubifs.h
@@ -366,6 +366,9 @@ struct ubifs_info
int dead_wm;
int dark_wm;
+ struct ubi_dev_info di;
+ struct ubi_vol_info vi;
+
int gc_lnum;
long long rp_size;
--
1.6.3.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH 1/2] mkfs.ubifs: remove duplicated code
2009-05-25 6:26 ` [PATCH 1/2] mkfs.ubifs: remove duplicated code Corentin Chary
2009-05-25 6:26 ` [PATCH 2/2] mkfs.ubifs: use libubi to format UBI volume Corentin Chary
@ 2009-05-25 7:49 ` Artem Bityutskiy
1 sibling, 0 replies; 14+ messages in thread
From: Artem Bityutskiy @ 2009-05-25 7:49 UTC (permalink / raw
To: Corentin Chary; +Cc: linux-mtd
On Mon, 2009-05-25 at 08:26 +0200, Corentin Chary wrote:
> ino->uid = cpu_to_le32(st->st_uid);
> ino->gid = cpu_to_le32(st->st_gid);
> was present twice.
>
> Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Pushed this one, thanks.
--
Best regards,
Artem Bityutskiy (Битюцкий Артём)
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/2] mkfs.ubifs: use libubi to format UBI volume
2009-05-25 6:26 ` [PATCH 2/2] mkfs.ubifs: use libubi to format UBI volume Corentin Chary
@ 2009-05-25 7:58 ` Artem Bityutskiy
2009-05-25 8:23 ` Corentin Chary
0 siblings, 1 reply; 14+ messages in thread
From: Artem Bityutskiy @ 2009-05-25 7:58 UTC (permalink / raw
To: Corentin Chary; +Cc: linux-mtd
Few more things :-)
On Mon, 2009-05-25 at 08:26 +0200, Corentin Chary wrote:
> +/**
> + * open_ubi - open the UBI volume.
> + * @node: name of the UBI volume character device to fetch information about
> + *
> + * Returns %0 in case of success and %-1 in case of failure
> + */
> +static int open_ubi(const char *node)
> +{
> + struct stat st;
> +
> + if (stat(node, &st) || !S_ISCHR(st.st_mode))
> + return -1;
> +
> + ubi = libubi_open();
> + if (!ubi)
> + return -1;
> + if (ubi_get_vol_info(ubi, node, &c->vi))
> + return -1;
> + if (ubi_get_dev_info1(ubi, c->vi.dev_num, &c->di))
> + return -1;
> + return 0;
> +}
I know this is nit-picking, but would be nicer to close libubi
in case of errors. Namely, in the second and third checks.
> +static int write_empty_leb(int lnum, int dtype)
> {
> - return write_leb(lnum, 0, leb_buf);
> + return write_leb(lnum, 0, leb_buf, dtype);
> }
You screwed the indentation here a bit.
> /**
> @@ -790,8 +838,9 @@ static int do_pad(void *buf, int len)
> * @node: node
> * @len: node length
> * @lnum: LEB number
> + * @dtype: expected data type
> */
> -static int write_node(void *node, int len, int lnum)
> +static int write_node(void *node, int len, int lnum, int dtype)
> {
> prepare_node(node, len);
>
> @@ -799,7 +848,7 @@ static int write_node(void *node, int len, int lnum)
>
> len = do_pad(leb_buf, len);
>
> - return write_leb(lnum, len, leb_buf);
> + return write_leb(lnum, len, leb_buf, dtype);
> }
>
> /**
> @@ -909,7 +958,7 @@ static int flush_nodes(void)
> if (!head_offs)
> return 0;
> len = do_pad(leb_buf, head_offs);
> - err = write_leb(head_lnum, len, leb_buf);
> + err = write_leb(head_lnum, len, leb_buf, UBI_UNKNOWN);
> if (err)
> return err;
> set_lprops(head_lnum, head_offs, head_flags);
> @@ -1581,14 +1630,20 @@ static int write_data(void)
> {
> int err;
>
> - err = stat(root, &root_st);
> - if (err)
> - return sys_err_msg("bad root file-system directory '%s'", root);
> + if (root) {
> + err = stat(root, &root_st);
> + if (err)
> + return sys_err_msg("bad root file-system directory '%s'"
> + , root);
This is a little ugly. Could you please leave the comma at close to the
" symbol, and move "root" to the second line. This is just how the rest
of the code is written. Let's be consistent.
You are probably irritated by this, sorry. The whole code is not that
ideal in general, but while I'm on it, I tell about every single nit I
see :-)
> --- a/mkfs.ubifs/ubifs.h
> +++ b/mkfs.ubifs/ubifs.h
> @@ -366,6 +366,9 @@ struct ubifs_info
> int dead_wm;
> int dark_wm;
>
> + struct ubi_dev_info di;
> + struct ubi_vol_info vi;
For consistency, you should probably comment these new fields.
--
Best regards,
Artem Bityutskiy (Битюцкий Артём)
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/2] mkfs.ubifs: use libubi to format UBI volume
2009-05-25 7:58 ` Artem Bityutskiy
@ 2009-05-25 8:23 ` Corentin Chary
2009-05-25 8:40 ` Artem Bityutskiy
0 siblings, 1 reply; 14+ messages in thread
From: Corentin Chary @ 2009-05-25 8:23 UTC (permalink / raw
To: dedekind; +Cc: linux-mtd
On Mon, May 25, 2009 at 9:58 AM, Artem Bityutskiy
<dedekind@infradead.org> wrote:
>
> I know this is nit-picking, but would be nicer to close libubi
> in case of errors. Namely, in the second and third checks.
In case of error, close_target() will close libubi. (if(ubi) libubi_close(ubi)).
But maybe you want to explicitly close libubi here ?
>> +static int write_empty_leb(int lnum, int dtype)
>> {
>> - return write_leb(lnum, 0, leb_buf);
>> + return write_leb(lnum, 0, leb_buf, dtype);
>> }
>
> You screwed the indentation here a bit.
Arg... M-x c-set-style gnu :/
>> - err = stat(root, &root_st);
>> - if (err)
>> - return sys_err_msg("bad root file-system directory '%s'", root);
>> + if (root) {
>> + err = stat(root, &root_st);
>> + if (err)
>> + return sys_err_msg("bad root file-system directory '%s'"
>> + , root);
>
> This is a little ugly. Could you please leave the comma at close to the
> " symbol, and move "root" to the second line. This is just how the rest
> of the code is written. Let's be consistent.
The comma is just at the 80 column limit.
Using Lindent, we get:
return
sys_err_msg("bad root file-system directory '%s'",
root);
Is this ok ?
>
>> --- a/mkfs.ubifs/ubifs.h
>> +++ b/mkfs.ubifs/ubifs.h
>> @@ -366,6 +366,9 @@ struct ubifs_info
>> int dead_wm;
>> int dark_wm;
>>
>> + struct ubi_dev_info di;
>> + struct ubi_vol_info vi;
>
> For consistency, you should probably comment these new fields.
Ok
--
Corentin Chary
http://xf.iksaif.net - http://uffs.org
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/2] mkfs.ubifs: use libubi to format UBI volume
2009-05-25 8:23 ` Corentin Chary
@ 2009-05-25 8:40 ` Artem Bityutskiy
2009-05-26 13:08 ` [PATCH] " Corentin Chary
2009-05-27 11:29 ` [PATCH 2/2] " Corentin Chary
0 siblings, 2 replies; 14+ messages in thread
From: Artem Bityutskiy @ 2009-05-25 8:40 UTC (permalink / raw
To: Corentin Chary; +Cc: linux-mtd
On Mon, 2009-05-25 at 10:23 +0200, Corentin Chary wrote:
> On Mon, May 25, 2009 at 9:58 AM, Artem Bityutskiy
> <dedekind@infradead.org> wrote:
> >
> > I know this is nit-picking, but would be nicer to close libubi
> > in case of errors. Namely, in the second and third checks.
>
> In case of error, close_target() will close libubi. (if(ubi) libubi_close(ubi)).
> But maybe you want to explicitly close libubi here ?
Ah, OK. NP then.
> The comma is just at the 80 column limit.
> Using Lindent, we get:
> return
> sys_err_msg("bad root file-system directory '%s'",
> root);
>
> Is this ok ?
I think you may just ignore the 80 chars limit and make it 81 chars :-)
--
Best regards,
Artem Bityutskiy (Битюцкий Артём)
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH] mkfs.ubifs: use libubi to format UBI volume
2009-05-25 8:40 ` Artem Bityutskiy
@ 2009-05-26 13:08 ` Corentin Chary
2009-05-27 12:21 ` Artem Bityutskiy
2009-05-27 11:29 ` [PATCH 2/2] " Corentin Chary
1 sibling, 1 reply; 14+ messages in thread
From: Corentin Chary @ 2009-05-26 13:08 UTC (permalink / raw
To: dedekind; +Cc: Corentin Chary, linux-mtd
libubi is now used to format directly UBI volume.
Typing mkfs.ubifs /dev/ubi0_0 is now possible.
dtypes should be ok as they are taken from UBIFS code.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
---
Makefile | 2 +-
mkfs.ubifs/Makefile | 5 +-
mkfs.ubifs/lpt.c | 10 ++--
mkfs.ubifs/mkfs.ubifs.c | 179 +++++++++++++++++++++++++++++++++++++---------
mkfs.ubifs/mkfs.ubifs.h | 4 +-
mkfs.ubifs/ubifs.h | 6 ++
6 files changed, 163 insertions(+), 43 deletions(-)
diff --git a/Makefile b/Makefile
index 969ab87..577634f 100644
--- a/Makefile
+++ b/Makefile
@@ -7,7 +7,7 @@ ifeq ($(WITHOUT_XATTR), 1)
CPPFLAGS += -DWITHOUT_XATTR
endif
-SUBDIRS = mkfs.ubifs ubi-utils
+SUBDIRS = ubi-utils mkfs.ubifs
TARGETS = ftl_format flash_erase flash_eraseall nanddump doc_loadbios \
ftl_check mkfs.jffs2 flash_lock flash_unlock flash_info \
diff --git a/mkfs.ubifs/Makefile b/mkfs.ubifs/Makefile
index e5bf9ce..a678b0a 100644
--- a/mkfs.ubifs/Makefile
+++ b/mkfs.ubifs/Makefile
@@ -1,8 +1,11 @@
+
+CPPFLAGS += -I../include -I../ubi-utils/include
+
ALL_SOURCES=*.[ch] hashtable/*.[ch]
TARGETS = mkfs.ubifs
-LDLIBS_mkfs.ubifs = -lz -llzo2 -lm -luuid
+LDLIBS_mkfs.ubifs = -lz -llzo2 -lm -luuid -L../ubi-utils/ -lubi
include ../common.mk
diff --git a/mkfs.ubifs/lpt.c b/mkfs.ubifs/lpt.c
index f6d4352..60002ff 100644
--- a/mkfs.ubifs/lpt.c
+++ b/mkfs.ubifs/lpt.c
@@ -410,7 +410,7 @@ int create_lpt(struct ubifs_info *c)
alen = ALIGN(len, c->min_io_size);
set_ltab(c, lnum, c->leb_size - alen, alen - len);
memset(p, 0xff, alen - len);
- err = write_leb(lnum++, alen, buf);
+ err = write_leb(lnum++, alen, buf, UBI_SHORTTERM);
if (err)
goto out;
p = buf;
@@ -452,7 +452,7 @@ int create_lpt(struct ubifs_info *c)
set_ltab(c, lnum, c->leb_size - alen,
alen - len);
memset(p, 0xff, alen - len);
- err = write_leb(lnum++, alen, buf);
+ err = write_leb(lnum++, alen, buf, UBI_SHORTTERM);
if (err)
goto out;
p = buf;
@@ -499,7 +499,7 @@ int create_lpt(struct ubifs_info *c)
alen = ALIGN(len, c->min_io_size);
set_ltab(c, lnum, c->leb_size - alen, alen - len);
memset(p, 0xff, alen - len);
- err = write_leb(lnum++, alen, buf);
+ err = write_leb(lnum++, alen, buf, UBI_SHORTTERM);
if (err)
goto out;
p = buf;
@@ -522,7 +522,7 @@ int create_lpt(struct ubifs_info *c)
alen = ALIGN(len, c->min_io_size);
set_ltab(c, lnum, c->leb_size - alen, alen - len);
memset(p, 0xff, alen - len);
- err = write_leb(lnum++, alen, buf);
+ err = write_leb(lnum++, alen, buf, UBI_SHORTTERM);
if (err)
goto out;
p = buf;
@@ -542,7 +542,7 @@ int create_lpt(struct ubifs_info *c)
/* Write remaining buffer */
memset(p, 0xff, alen - len);
- err = write_leb(lnum, alen, buf);
+ err = write_leb(lnum, alen, buf, UBI_SHORTTERM);
if (err)
goto out;
diff --git a/mkfs.ubifs/mkfs.ubifs.c b/mkfs.ubifs/mkfs.ubifs.c
index c0c1c29..9ecf82b 100644
--- a/mkfs.ubifs/mkfs.ubifs.c
+++ b/mkfs.ubifs/mkfs.ubifs.c
@@ -95,6 +95,7 @@ struct inum_mapping {
*/
struct ubifs_info info_;
static struct ubifs_info *c = &info_;
+static libubi_t ubi;
/* Debug levels are: 0 (none), 1 (statistics), 2 (files) ,3 (more details) */
int debug_level;
@@ -105,6 +106,7 @@ static int root_len;
static struct stat root_st;
static char *output;
static int out_fd;
+static int out_ubi;
static int squash_owner;
/* The 'head' (position) which nodes are written */
@@ -154,8 +156,15 @@ static const struct option longopts[] = {
};
static const char *helptext =
-"Usage: mkfs.ubifs [OPTIONS]\n"
+"Usage: mkfs.ubifs [OPTIONS] target\n"
"Make a UBIFS file system image from an existing directory tree\n\n"
+"Examples:\n"
+"Build file system from directory /opt/img, writting the result in the ubifs.img file\n"
+"\tmkfs.ubifs -m 512 -e 128KiB -c 100 -r /opt/img ubifs.img\n"
+"The same, but writting directly to an UBI volume\n"
+"\tmkfs.ubifs -r /opt/img /dev/ubi0_0\n"
+"Creating an empty UBIFS filesystem on an UBI volume\n"
+"\tmkfs.ubifs /dev/ubi0_0\n\n"
"Options:\n"
"-r, -d, --root=DIR build file system from directory DIR\n"
"-m, --min-io-size=SIZE minimum I/O unit size\n"
@@ -357,11 +366,9 @@ static int validate_options(void)
{
int tmp;
- if (!root)
- return err_msg("root directory was not specified");
if (!output)
- return err_msg("no output file specified");
- if (in_path(root, output))
+ return err_msg("no output file or UBI volume specified");
+ if (root && in_path(root, output))
return err_msg("output file cannot be in the UBIFS root "
"directory");
if (!is_power_of_2(c->min_io_size))
@@ -467,6 +474,28 @@ static long long get_bytes(const char *str)
return bytes;
}
+/**
+ * open_ubi - open the UBI volume.
+ * @node: name of the UBI volume character device to fetch information about
+ *
+ * Returns %0 in case of success and %-1 in case of failure
+ */
+static int open_ubi(const char *node)
+{
+ struct stat st;
+
+ if (stat(node, &st) || !S_ISCHR(st.st_mode))
+ return -1;
+
+ ubi = libubi_open();
+ if (!ubi)
+ return -1;
+ if (ubi_get_vol_info(ubi, node, &c->vi))
+ return -1;
+ if (ubi_get_dev_info1(ubi, c->vi.dev_num, &c->di))
+ return -1;
+ return 0;
+}
static int get_options(int argc, char**argv)
{
@@ -616,6 +645,20 @@ static int get_options(int argc, char**argv)
}
}
+ if (optind != argc && !output)
+ output = strdup(argv[optind]);
+ if (output)
+ out_ubi = !open_ubi(output);
+
+ if (out_ubi) {
+ c->min_io_size = c->di.min_io_size;
+ c->leb_size = c->vi.leb_size;
+ c->max_leb_cnt = c->vi.rsvd_lebs;
+ }
+
+ if (!output)
+ return err_msg("not output device or file specified");
+
if (c->min_io_size == -1)
return err_msg("min. I/O unit was not specified "
"(use -h for help)");
@@ -714,22 +757,26 @@ static void prepare_node(void *node, int len)
}
/**
- * write_leb - copy the image of a LEB to the output file.
+ * write_leb - copy the image of a LEB to the output target.
* @lnum: LEB number
* @len: length of data in the buffer
* @buf: buffer (must be at least c->leb_size bytes)
+ * @dtype: expected data type
*/
-int write_leb(int lnum, int len, void *buf)
+int write_leb(int lnum, int len, void *buf, int dtype)
{
off64_t pos = (off64_t)lnum * c->leb_size;
dbg_msg(3, "LEB %d len %d", lnum, len);
+ memset(buf + len, 0xff, c->leb_size - len);
+ if (out_ubi)
+ if (ubi_leb_change_start(ubi, out_fd, lnum, c->leb_size, dtype))
+ return sys_err_msg("ubi_leb_change_start failed");
+
if (lseek64(out_fd, pos, SEEK_SET) != pos)
return sys_err_msg("lseek64 failed seeking %lld",
(long long)pos);
- memset(buf + len, 0xff, c->leb_size - len);
-
if (write(out_fd, buf, c->leb_size) != c->leb_size)
return sys_err_msg("write failed writing %d bytes at pos %lld",
c->leb_size, (long long)pos);
@@ -738,12 +785,13 @@ int write_leb(int lnum, int len, void *buf)
}
/**
- * write_empty_leb - copy the image of an empty LEB to the output file.
+ * write_empty_leb - copy the image of an empty LEB to the output target.
* @lnum: LEB number
+ * @dtype: expected data type
*/
-static int write_empty_leb(int lnum)
+static int write_empty_leb(int lnum, int dtype)
{
- return write_leb(lnum, 0, leb_buf);
+ return write_leb(lnum, 0, leb_buf, dtype);
}
/**
@@ -790,8 +838,9 @@ static int do_pad(void *buf, int len)
* @node: node
* @len: node length
* @lnum: LEB number
+ * @dtype: expected data type
*/
-static int write_node(void *node, int len, int lnum)
+static int write_node(void *node, int len, int lnum, int dtype)
{
prepare_node(node, len);
@@ -799,7 +848,7 @@ static int write_node(void *node, int len, int lnum)
len = do_pad(leb_buf, len);
- return write_leb(lnum, len, leb_buf);
+ return write_leb(lnum, len, leb_buf, dtype);
}
/**
@@ -909,7 +958,7 @@ static int flush_nodes(void)
if (!head_offs)
return 0;
len = do_pad(leb_buf, head_offs);
- err = write_leb(head_lnum, len, leb_buf);
+ err = write_leb(head_lnum, len, leb_buf, UBI_UNKNOWN);
if (err)
return err;
set_lprops(head_lnum, head_offs, head_flags);
@@ -1581,14 +1630,20 @@ static int write_data(void)
{
int err;
- err = stat(root, &root_st);
- if (err)
- return sys_err_msg("bad root file-system directory '%s'", root);
+ if (root) {
+ err = stat(root, &root_st);
+ if (err)
+ return sys_err_msg("bad root file-system directory '%s'",
+ root);
+ } else {
+ root_st.st_mtime = time(NULL);
+ root_st.st_atime = root_st.st_ctime = root_st.st_mtime;
+ }
root_st.st_uid = root_st.st_gid = 0;
root_st.st_mode = S_IFDIR | S_IRWXU | S_IRWXG | S_IRWXO;
head_flags = 0;
- err = add_directory(root, UBIFS_ROOT_INO, &root_st, 0);
+ err = add_directory(root, UBIFS_ROOT_INO, &root_st, !root);
if (err)
return err;
err = add_multi_linked_files();
@@ -1831,7 +1886,7 @@ static int set_gc_lnum(void)
int err;
c->gc_lnum = head_lnum++;
- err = write_empty_leb(c->gc_lnum);
+ err = write_empty_leb(c->gc_lnum, UBI_LONGTERM);
if (err)
return err;
set_lprops(c->gc_lnum, 0, 0);
@@ -1907,7 +1962,7 @@ static int write_super(void)
if (c->big_lpt)
sup.flags |= cpu_to_le32(UBIFS_FLG_BIGLPT);
- return write_node(&sup, UBIFS_SB_NODE_SZ, UBIFS_SB_LNUM);
+ return write_node(&sup, UBIFS_SB_NODE_SZ, UBIFS_SB_LNUM, UBI_LONGTERM);
}
/**
@@ -1950,11 +2005,13 @@ static int write_master(void)
mst.total_dark = cpu_to_le64(c->lst.total_dark);
mst.leb_cnt = cpu_to_le32(c->leb_cnt);
- err = write_node(&mst, UBIFS_MST_NODE_SZ, UBIFS_MST_LNUM);
+ err = write_node(&mst, UBIFS_MST_NODE_SZ, UBIFS_MST_LNUM,
+ UBI_SHORTTERM);
if (err)
return err;
- err = write_node(&mst, UBIFS_MST_NODE_SZ, UBIFS_MST_LNUM + 1);
+ err = write_node(&mst, UBIFS_MST_NODE_SZ, UBIFS_MST_LNUM + 1,
+ UBI_SHORTTERM);
if (err)
return err;
@@ -1974,14 +2031,14 @@ static int write_log(void)
cs.ch.node_type = UBIFS_CS_NODE;
cs.cmt_no = cpu_to_le64(0);
- err = write_node(&cs, UBIFS_CS_NODE_SZ, lnum);
+ err = write_node(&cs, UBIFS_CS_NODE_SZ, lnum, UBI_UNKNOWN);
if (err)
return err;
lnum += 1;
for (i = 1; i < c->log_lebs; i++, lnum++) {
- err = write_empty_leb(lnum);
+ err = write_empty_leb(lnum, UBI_UNKNOWN);
if (err)
return err;
}
@@ -2002,7 +2059,7 @@ static int write_lpt(void)
lnum = c->nhead_lnum + 1;
while (lnum <= c->lpt_last) {
- err = write_empty_leb(lnum++);
+ err = write_empty_leb(lnum++, UBI_SHORTTERM);
if (err)
return err;
}
@@ -2019,7 +2076,7 @@ static int write_orphan_area(void)
lnum = UBIFS_LOG_LNUM + c->log_lebs + c->lpt_lebs;
for (i = 0; i < c->orph_lebs; i++, lnum++) {
- err = write_empty_leb(lnum);
+ err = write_empty_leb(lnum, UBI_SHORTTERM);
if (err)
return err;
}
@@ -2027,24 +2084,76 @@ static int write_orphan_area(void)
}
/**
- * open_target - open the output file.
+ * check_volume_empty - check if the UBI volume is empty.
+ *
+ * This function checks if the UBI volume is empty by looking if its LEBs are
+ * mapped or not.
+ *
+ * Returns %0 in case of success, %1 is the volume is not empty,
+ * and a negative error code in case of failure.
+ */
+static int check_volume_empty(void)
+{
+ int lnum, err;
+
+ for (lnum = 0; lnum < c->vi.rsvd_lebs; lnum++) {
+ err = ubi_is_mapped(out_fd, lnum);
+ if (err < 0)
+ return err;
+ if (err == 1)
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * open_target - open the output target.
+ *
+ * Open the output target. The target can be an UBI volume
+ * or a file.
+ *
+ * Returns %0 in case of success and %-1 in case of failure.
*/
static int open_target(void)
{
- out_fd = open(output, O_CREAT | O_RDWR | O_TRUNC,
- S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
- if (out_fd == -1)
- return sys_err_msg("cannot create output file '%s'", output);
+ if (out_ubi) {
+ out_fd = open(output, O_RDWR | O_EXCL);
+
+ if (out_fd == -1)
+ return sys_err_msg("cannot open the UBI volume '%s'",
+ output);
+ if (ubi_set_property(out_fd, UBI_PROP_DIRECT_WRITE, 1))
+ return sys_err_msg("ubi_set_property failed");
+
+ if (check_volume_empty())
+ return err_msg("UBI volume is not empty");
+ } else {
+ out_fd = open(output, O_CREAT | O_RDWR | O_TRUNC,
+ S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH);
+ if (out_fd == -1)
+ return sys_err_msg("cannot create output file '%s'",
+ output);
+ }
return 0;
}
+
/**
- * close_target - close the output file.
+ * close_target - close the output target.
+ *
+ * Close the output target. If the target was an UBI
+ * volume, also close libubi.
+ *
+ * Returns %0 in case of success and %-1 in case of failure.
*/
static int close_target(void)
{
- if (close(out_fd) == -1)
- return sys_err_msg("cannot close output file '%s'", output);
+ if (ubi)
+ libubi_close(ubi);
+ if (out_fd >= 0 && close(out_fd) == -1)
+ return sys_err_msg("cannot close the target '%s'", output);
+ if (output)
+ free(output);
return 0;
}
diff --git a/mkfs.ubifs/mkfs.ubifs.h b/mkfs.ubifs/mkfs.ubifs.h
index 6460bd5..16b34c7 100644
--- a/mkfs.ubifs/mkfs.ubifs.h
+++ b/mkfs.ubifs/mkfs.ubifs.h
@@ -46,7 +46,9 @@
#include <libgen.h>
#include <ctype.h>
#include <uuid/uuid.h>
+#include <sys/file.h>
+#include "libubi.h"
#include "crc32.h"
#include "defs.h"
#include "crc16.h"
@@ -128,7 +130,7 @@ extern struct ubifs_info info_;
struct hashtable_itr;
-int write_leb(int lnum, int len, void *buf);
+int write_leb(int lnum, int len, void *buf, int dtype);
int parse_devtable(const char *tbl_file);
struct path_htbl_element *devtbl_find_path(const char *path);
struct name_htbl_element *devtbl_find_name(struct path_htbl_element *ph_elt,
diff --git a/mkfs.ubifs/ubifs.h b/mkfs.ubifs/ubifs.h
index 79c7192..5c29046 100644
--- a/mkfs.ubifs/ubifs.h
+++ b/mkfs.ubifs/ubifs.h
@@ -292,6 +292,9 @@ struct ubifs_znode
* @dead_wm: LEB dead space watermark
* @dark_wm: LEB dark space watermark
*
+ * @di: UBI device information
+ * @vi: UBI volume information
+ *
* @gc_lnum: LEB number used for garbage collection
* @rp_size: reserved pool size
*
@@ -366,6 +369,9 @@ struct ubifs_info
int dead_wm;
int dark_wm;
+ struct ubi_dev_info di;
+ struct ubi_vol_info vi;
+
int gc_lnum;
long long rp_size;
--
1.6.3.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH 2/2] mkfs.ubifs: use libubi to format UBI volume
2009-05-25 8:40 ` Artem Bityutskiy
2009-05-26 13:08 ` [PATCH] " Corentin Chary
@ 2009-05-27 11:29 ` Corentin Chary
2009-05-27 11:33 ` Artem Bityutskiy
1 sibling, 1 reply; 14+ messages in thread
From: Corentin Chary @ 2009-05-27 11:29 UTC (permalink / raw
To: dedekind; +Cc: linux-mtd
On Mon, May 25, 2009 at 10:40 AM, Artem Bityutskiy
<dedekind@infradead.org> wrote:
> On Mon, 2009-05-25 at 10:23 +0200, Corentin Chary wrote:
>> On Mon, May 25, 2009 at 9:58 AM, Artem Bityutskiy
>> <dedekind@infradead.org> wrote:
>> >
>> > I know this is nit-picking, but would be nicer to close libubi
>> > in case of errors. Namely, in the second and third checks.
>>
>> In case of error, close_target() will close libubi. (if(ubi) libubi_close(ubi)).
>> But maybe you want to explicitly close libubi here ?
>
> Ah, OK. NP then.
>
>> The comma is just at the 80 column limit.
>> Using Lindent, we get:
>> return
>> sys_err_msg("bad root file-system directory '%s'",
>> root);
>>
>> Is this ok ?
>
> I think you may just ignore the 80 chars limit and make it 81 chars :-)
>
I resended the patch, but it's moderated again (I used the
--in-reply-to feature), sorry.
--
Corentin Chary
http://xf.iksaif.net - http://uffs.org
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/2] mkfs.ubifs: use libubi to format UBI volume
2009-05-27 11:29 ` [PATCH 2/2] " Corentin Chary
@ 2009-05-27 11:33 ` Artem Bityutskiy
0 siblings, 0 replies; 14+ messages in thread
From: Artem Bityutskiy @ 2009-05-27 11:33 UTC (permalink / raw
To: Corentin Chary; +Cc: linux-mtd
On Wed, 2009-05-27 at 13:29 +0200, Corentin Chary wrote:
> I resended the patch, but it's moderated again (I used the
> --in-reply-to feature), sorry.
Yeah, I have it. Just need some time to test this.
--
Best regards,
Artem Bityutskiy (Битюцкий Артём)
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH] mkfs.ubifs: use libubi to format UBI volume
2009-05-26 13:08 ` [PATCH] " Corentin Chary
@ 2009-05-27 12:21 ` Artem Bityutskiy
2009-05-27 13:19 ` Corentin Chary
0 siblings, 1 reply; 14+ messages in thread
From: Artem Bityutskiy @ 2009-05-27 12:21 UTC (permalink / raw
To: Corentin Chary; +Cc: linux-mtd
On Tue, 2009-05-26 at 15:08 +0200, Corentin Chary wrote:
> libubi is now used to format directly UBI volume.
> Typing mkfs.ubifs /dev/ubi0_0 is now possible.
> dtypes should be ok as they are taken from UBIFS code.
>
> Signed-off-by: Corentin Chary <corentincj@iksaif.net>
> ---
> Makefile | 2 +-
> mkfs.ubifs/Makefile | 5 +-
> mkfs.ubifs/lpt.c | 10 ++--
> mkfs.ubifs/mkfs.ubifs.c | 179 +++++++++++++++++++++++++++++++++++++---------
> mkfs.ubifs/mkfs.ubifs.h | 4 +-
> mkfs.ubifs/ubifs.h | 6 ++
> 6 files changed, 163 insertions(+), 43 deletions(-)
Works fine. Good job, thanks!
It would be 200% cool if you also provided a patch for
mtd-www and just added a note that the UBIFS image may
be written directly to the UBI volum, not jut to a file.
I mean here:
http://www.linux-mtd.infradead.org/faq/ubifs.html#L_mkfubifs
:-)
Pushed your patch, thanks!
--
Best regards,
Artem Bityutskiy (Битюцкий Артём)
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH] mkfs.ubifs: use libubi to format UBI volume
2009-05-27 12:21 ` Artem Bityutskiy
@ 2009-05-27 13:19 ` Corentin Chary
2009-05-27 13:21 ` Artem Bityutskiy
2009-06-02 9:26 ` Artem Bityutskiy
0 siblings, 2 replies; 14+ messages in thread
From: Corentin Chary @ 2009-05-27 13:19 UTC (permalink / raw
To: dedekind; +Cc: linux-mtd
On Wed, May 27, 2009 at 2:21 PM, Artem Bityutskiy
<dedekind@infradead.org> wrote:
> On Tue, 2009-05-26 at 15:08 +0200, Corentin Chary wrote:
>> libubi is now used to format directly UBI volume.
>> Typing mkfs.ubifs /dev/ubi0_0 is now possible.
>> dtypes should be ok as they are taken from UBIFS code.
>>
>> Signed-off-by: Corentin Chary <corentincj@iksaif.net>
>> ---
>> Makefile | 2 +-
>> mkfs.ubifs/Makefile | 5 +-
>> mkfs.ubifs/lpt.c | 10 ++--
>> mkfs.ubifs/mkfs.ubifs.c | 179 +++++++++++++++++++++++++++++++++++++---------
>> mkfs.ubifs/mkfs.ubifs.h | 4 +-
>> mkfs.ubifs/ubifs.h | 6 ++
>> 6 files changed, 163 insertions(+), 43 deletions(-)
>
> Works fine. Good job, thanks!
>
> It would be 200% cool if you also provided a patch for
> mtd-www and just added a note that the UBIFS image may
> be written directly to the UBI volum, not jut to a file.
>
> I mean here:
> http://www.linux-mtd.infradead.org/faq/ubifs.html#L_mkfubifs
>
> :-)
>
> Pushed your patch, thanks!
Ok, I'll do that ASAP, but I believe I won't find the time before next week.
Thanks
--
Corentin Chary
http://xf.iksaif.net - http://uffs.org
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH] mkfs.ubifs: use libubi to format UBI volume
2009-05-27 13:19 ` Corentin Chary
@ 2009-05-27 13:21 ` Artem Bityutskiy
2009-06-02 9:26 ` Artem Bityutskiy
1 sibling, 0 replies; 14+ messages in thread
From: Artem Bityutskiy @ 2009-05-27 13:21 UTC (permalink / raw
To: Corentin Chary; +Cc: linux-mtd
On Wed, 2009-05-27 at 15:19 +0200, Corentin Chary wrote:
> Ok, I'll do that ASAP, but I believe I won't find the time before next week.
> Thanks
No hurry :-) This is just an optional nice thing to do.
--
Best regards,
Artem Bityutskiy (Битюцкий Артём)
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH] mkfs.ubifs: use libubi to format UBI volume
2009-05-27 13:19 ` Corentin Chary
2009-05-27 13:21 ` Artem Bityutskiy
@ 2009-06-02 9:26 ` Artem Bityutskiy
1 sibling, 0 replies; 14+ messages in thread
From: Artem Bityutskiy @ 2009-06-02 9:26 UTC (permalink / raw
To: Corentin Chary; +Cc: linux-mtd
On Wed, 2009-05-27 at 15:19 +0200, Corentin Chary wrote:
> On Wed, May 27, 2009 at 2:21 PM, Artem Bityutskiy
> <dedekind@infradead.org> wrote:
> > On Tue, 2009-05-26 at 15:08 +0200, Corentin Chary wrote:
> >> libubi is now used to format directly UBI volume.
> >> Typing mkfs.ubifs /dev/ubi0_0 is now possible.
> >> dtypes should be ok as they are taken from UBIFS code.
> >>
> >> Signed-off-by: Corentin Chary <corentincj@iksaif.net>
> >> ---
> >> Makefile | 2 +-
> >> mkfs.ubifs/Makefile | 5 +-
> >> mkfs.ubifs/lpt.c | 10 ++--
> >> mkfs.ubifs/mkfs.ubifs.c | 179 +++++++++++++++++++++++++++++++++++++---------
> >> mkfs.ubifs/mkfs.ubifs.h | 4 +-
> >> mkfs.ubifs/ubifs.h | 6 ++
> >> 6 files changed, 163 insertions(+), 43 deletions(-)
> >
> > Works fine. Good job, thanks!
> >
> > It would be 200% cool if you also provided a patch for
> > mtd-www and just added a note that the UBIFS image may
> > be written directly to the UBI volum, not jut to a file.
> >
> > I mean here:
> > http://www.linux-mtd.infradead.org/faq/ubifs.html#L_mkfubifs
> >
> > :-)
> >
> > Pushed your patch, thanks!
>
> Ok, I'll do that ASAP, but I believe I won't find the time before next week.
> Thanks
I just updated the web site and added a note that mkfs.ubifs can write
straight to UBI volumes.
--
Best regards,
Artem Bityutskiy (Битюцкий Артём)
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2009-06-02 9:26 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-05-25 6:26 [PATCH 0/2] mkfs.ubifs updates Corentin Chary
2009-05-25 6:26 ` [PATCH 1/2] mkfs.ubifs: remove duplicated code Corentin Chary
2009-05-25 6:26 ` [PATCH 2/2] mkfs.ubifs: use libubi to format UBI volume Corentin Chary
2009-05-25 7:58 ` Artem Bityutskiy
2009-05-25 8:23 ` Corentin Chary
2009-05-25 8:40 ` Artem Bityutskiy
2009-05-26 13:08 ` [PATCH] " Corentin Chary
2009-05-27 12:21 ` Artem Bityutskiy
2009-05-27 13:19 ` Corentin Chary
2009-05-27 13:21 ` Artem Bityutskiy
2009-06-02 9:26 ` Artem Bityutskiy
2009-05-27 11:29 ` [PATCH 2/2] " Corentin Chary
2009-05-27 11:33 ` Artem Bityutskiy
2009-05-25 7:49 ` [PATCH 1/2] mkfs.ubifs: remove duplicated code Artem Bityutskiy
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.