* [Bluez-users] PAN
@ 2004-04-20 8:48 ALBERT RIBAS GUASCH
2004-04-20 11:07 ` Marcel Holtmann
0 siblings, 1 reply; 6+ messages in thread
From: ALBERT RIBAS GUASCH @ 2004-04-20 8:48 UTC (permalink / raw
To: BlueZ Mailing List
Hello all!!
I'm sorry for my lasts postings, I didn't know how
to ask questions and I started annoying you, I hope
now I'll do it in the right way (not changing the
subject!!).
Well, I already solved the problem with rfcomm, and
now I'm trying to set up a PAN between two Belkin
USB dongles. The thing is, when I have both USB
plugged into my computer, I just can get one of them
UP RUNNING, the other one is not possible to
initialize, so it continues with DOWN, I want to
create the PAN but I only have one computer to test
it. Is this possible to do?
Thank you very much!!
Albert
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-users] PAN
2004-04-20 8:48 ALBERT RIBAS GUASCH
@ 2004-04-20 11:07 ` Marcel Holtmann
0 siblings, 0 replies; 6+ messages in thread
From: Marcel Holtmann @ 2004-04-20 11:07 UTC (permalink / raw
To: ALBERT RIBAS GUASCH; +Cc: BlueZ Mailing List
Hi Albert,
> Well, I already solved the problem with rfcomm, and
> now I'm trying to set up a PAN between two Belkin
> USB dongles. The thing is, when I have both USB
> plugged into my computer, I just can get one of them
> UP RUNNING, the other one is not possible to
> initialize, so it continues with DOWN, I want to
> create the PAN but I only have one computer to test
> it. Is this possible to do?
getting both dongles running on the same computer is possible and you
can use up to 16 dongles, PCMCIA cards or serial adapters at the same
time. But it is not possible to create a PAN between two dongles on the
same computer. You won't see any traffic between them, because
everything goes over the loopback interface.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-users] PAN
@ 2004-04-27 8:44 ALBERT RIBAS GUASCH
2004-04-27 11:58 ` Marcel Holtmann
0 siblings, 1 reply; 6+ messages in thread
From: ALBERT RIBAS GUASCH @ 2004-04-27 8:44 UTC (permalink / raw
To: Marcel Holtmann; +Cc: bluez-users
Hi!!
I already have two computers to try the PAN on them
with two USB dongles, but I still have some problems.
In one computer I run:
modprobe bnep
hcid
pand --listen --role GN
And in the other one:
modprobe bnep
hcid
pand --connect 00:0A:3A:50:20:3C
then, I look at ifconfig (on both sides) and the
connection is ok for a while, but when I check
ifconfig again it has disappeared!!
Then, If _I do a pand --show on the client side, I
see nothing, but on the master side, it is shown as
if the connection was still ok!
Could you help me to mantain stable this connection??
Thank you!!!!
ALBERT
----- Missatge original -----
De: Marcel Holtmann <marcel@holtmann.org>
Data: Dimarts, Abril 20, 2004 1:07 pm
Assumpte: Re: [Bluez-users] PAN
> Hi Albert,
>
> > Well, I already solved the problem with rfcomm, and
> > now I'm trying to set up a PAN between two Belkin
> > USB dongles. The thing is, when I have both USB
> > plugged into my computer, I just can get one of them
> > UP RUNNING, the other one is not possible to
> > initialize, so it continues with DOWN, I want to
> > create the PAN but I only have one computer to test
> > it. Is this possible to do?
>
> getting both dongles running on the same computer
is possible and you
> can use up to 16 dongles, PCMCIA cards or serial
adapters at the same
> time. But it is not possible to create a PAN
between two dongles on
> thesame computer. You won't see any traffic
between them, because
> everything goes over the loopback interface.
>
> Regards
>
> Marcel
>
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-users] PAN
2004-04-27 8:44 [Bluez-users] PAN ALBERT RIBAS GUASCH
@ 2004-04-27 11:58 ` Marcel Holtmann
0 siblings, 0 replies; 6+ messages in thread
From: Marcel Holtmann @ 2004-04-27 11:58 UTC (permalink / raw
To: ALBERT RIBAS GUASCH; +Cc: BlueZ Mailing List
Hi Albert,
> I already have two computers to try the PAN on them
> with two USB dongles, but I still have some problems.
>
> In one computer I run:
>
> modprobe bnep
> hcid
> pand --listen --role GN
>
> And in the other one:
> modprobe bnep
> hcid
> pand --connect 00:0A:3A:50:20:3C
>
> then, I look at ifconfig (on both sides) and the
> connection is ok for a while, but when I check
> ifconfig again it has disappeared!!
>
> Then, If _I do a pand --show on the client side, I
> see nothing, but on the master side, it is shown as
> if the connection was still ok!
>
> Could you help me to mantain stable this connection??
try to use "ifconfig -a" so you also see unconfigured interfaces. Do you
have somekind of DHCP running? What Bluetoth chip is on the Belkin
dongles (check with "hciconfig -a")? Run "hcidump -w <file>" as root on
one machine and send us the binary dump file. Do you see any errors when
calling dmesg?
Regards
Marcel
-------------------------------------------------------
This SF.net email is sponsored by: The Robotic Monkeys at ThinkGeek
For a limited time only, get FREE Ground shipping on all orders of $35
or more. Hurry up and shop folks, this offer expires April 30th!
http://www.thinkgeek.com/freeshipping/?cpg=12297
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bluez-users] PAN
@ 2004-04-30 9:39 ALBERT RIBAS GUASCH
0 siblings, 0 replies; 6+ messages in thread
From: ALBERT RIBAS GUASCH @ 2004-04-30 9:39 UTC (permalink / raw
To: Marcel Holtmann; +Cc: BlueZ Mailing List
[-- Attachment #1: Type: text/plain, Size: 2523 bytes --]
Hi Marcel,
If I do an hciconfig -a, i get the following info:
hci0:
Type: USB
BD Address: 00:0A:3A:50:14:BC ACL MTU: 192:8 SCO
MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:3963 acl:82 sco:0 events:60 errors:0
TX bytes:3210 acl:37 sco:0 commands:19 errors:0
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ (0)'
Class: 0x000100
Service Classes: Unspecified
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1)
LMP Subver: 0x20d
Manufacturer: Cambridge Silicon Radio (10)
I don't get any errors on calling dmesg, but I have
DHCP running in eth0 , does this have any influence
on the bluetooth connection?
Now, I've managed to assign IP to bnep0 in both
machines,and when everything is stable, I can ping
from one machine to the other, but I've checked that
sometimes bnep0 gets down, I can see it with
ifconfig -a, and I can assign the IP again, but how
can I do to mantain bnep0 stable?
It is something very strange because sometimes it
works fine for five minutes, others is just a pair
of minutes, and in one of the tests it's been
working for twenty minutes!
I send you the output on hcidump -w before doing a
pair of pings.
Thank you very much!!!!
Albert
----- Missatge original -----
De: Marcel Holtmann <marcel@holtmann.org>
Data: Dimarts, Abril 27, 2004 1:58 pm
Assumpte: Re: [Bluez-users] PAN
> Hi Albert,
>
> > I already have two computers to try the PAN on them
> > with two USB dongles, but I still have some
problems.
> >
> > In one computer I run:
> >
> > modprobe bnep
> > hcid
> > pand --listen --role GN
> >
> > And in the other one:
> > modprobe bnep
> > hcid
> > pand --connect 00:0A:3A:50:20:3C
> >
> > then, I look at ifconfig (on both sides) and the
> > connection is ok for a while, but when I check
> > ifconfig again it has disappeared!!
> >
> > Then, If _I do a pand --show on the client side, I
> > see nothing, but on the master side, it is shown as
> > if the connection was still ok!
> >
> > Could you help me to mantain stable this
connection??
>
> try to use "ifconfig -a" so you also see
unconfigured interfaces.
> Do you
> have somekind of DHCP running? What Bluetoth chip
is on the Belkin
> dongles (check with "hciconfig -a")? Run "hcidump
-w <file>" as
> root on
> one machine and send us the binary dump file. Do
you see any errors
> whencalling dmesg?
>
> Regards
>
> Marcel
>
>
>
[-- Attachment #2: file --]
[-- Type: application/octet-stream, Size: 2550 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Bluez-users] pan
@ 2006-08-21 7:33 bees
0 siblings, 0 replies; 6+ messages in thread
From: bees @ 2006-08-21 7:33 UTC (permalink / raw
To: bluez-users
[-- Attachment #1.1: Type: text/plain, Size: 338 bytes --]
Hi,All:
I have established a PAN connection, the GN is PC(windowsXP),while the
PANU is Linux。when I connect the GN successfully, I can't "ping" each other,
why?
the GN:
IP : 192.168.0.201
netmask: 255.255.255.0
gateway: 192.168.0.201
PANU
ip: 192.168.0.205
netmask:255.255.255.0
gateway:192.168.0.201
any help will be appreciated
[-- Attachment #1.2: Type: text/html, Size: 751 bytes --]
[-- Attachment #2: Type: text/plain, Size: 373 bytes --]
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
[-- Attachment #3: Type: text/plain, Size: 164 bytes --]
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2006-08-21 7:33 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-04-30 9:39 [Bluez-users] PAN ALBERT RIBAS GUASCH
-- strict thread matches above, loose matches on Subject: below --
2006-08-21 7:33 [Bluez-users] pan bees
2004-04-27 8:44 [Bluez-users] PAN ALBERT RIBAS GUASCH
2004-04-27 11:58 ` Marcel Holtmann
2004-04-20 8:48 ALBERT RIBAS GUASCH
2004-04-20 11:07 ` Marcel Holtmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.