From 74350addbafab84f016145323d6c37506d374d64 Mon Sep 17 00:00:00 2001
From: Eric Wong <e@80x24.org>
Date: Tue, 27 Jan 2015 01:20:06 +0000
Subject: fadefx: effects chain generation

We need to generate a coherent command set for wrapping
portions together, this sets us up for that.
---
 lib/dtas/fadefx.rb | 56 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 lib/dtas/format.rb |  1 +
 2 files changed, 57 insertions(+)

(limited to 'lib')

diff --git a/lib/dtas/fadefx.rb b/lib/dtas/fadefx.rb
index d67f896..899505b 100644
--- a/lib/dtas/fadefx.rb
+++ b/lib/dtas/fadefx.rb
@@ -2,7 +2,9 @@
 # License: GPLv3 or later (https://www.gnu.org/licenses/gpl-3.0.txt)
 require_relative '../dtas'
 require_relative 'parse_time'
+require_relative 'xs'
 
+# note: This is sox-specific
 # --------- time --------->
 # _____   _______   ______
 #      \ /       \ /
@@ -15,6 +17,7 @@ require_relative 'parse_time'
 # in_next  - controls the upward slope into next
 class DTAS::FadeFX # :nodoc:
   include DTAS::ParseTime
+  include DTAS::XS
 
   attr_reader :out_prev, :in_cur, :out_cur, :in_next
   F = Struct.new(:type, :flen)
@@ -28,6 +31,59 @@ class DTAS::FadeFX # :nodoc:
     end
   end
 
+  def fade_cur_fx(format, tbeg, tlen, args = [])
+    fx = %W(trim #{tbeg}s #{tlen}s)
+    fx.concat(args)
+    if @in_cur && @out_cur && @in_cur.type == @out_cur.type
+      f = %W(fade #{@in_cur.type} #{@in_cur.flen} #{tlen}s #{@out_cur.flen})
+      fx.concat(f)
+    else # differing fade types for in/out, chain them:
+      fpart = @in_cur and
+        fx.concat(%W(fade #{fpart.type} #{fpart.flen} 0 0))
+      fpart = @out_cur and
+        fx.concat(%W(fade #{fpart.type} 0 #{tlen}s #{fpart.flen}))
+    end
+    fx
+  end
+
+  def fade_out_prev_fx(format, tbeg, tlen)
+    fx = %W(trim #{tbeg}s)
+
+    if fpart = @out_prev
+      out_len = format.hhmmss_to_samples(fpart.flen)
+      fx.concat(%W(fade #{fpart.type} 0 #{out_len}s #{out_len}s))
+      remain = tlen - out_len
+
+      # fade-out is longer than tlen, so truncate again:
+      remain < 0 and fx.concat(%W(trim 0 #{tlen}s))
+
+      # pad with silence, this is where fade_cur_fx goes
+      remain > 0 and fx.concat(%W(pad #{remain}s@#{out_len}s))
+    end
+    fx
+  end
+
+  def fade_in_next_fx(format, tbeg, tlen)
+    fpart = @in_next
+    flen = fpart ? fpart.flen : 0
+    nlen = format.hhmmss_to_samples(flen)
+    nbeg = tbeg + tlen - nlen
+    npad = nbeg - tbeg
+    if npad < 0
+      warn("in_next should not exceed range: #{inspect} @trim " \
+           "#{tbeg}s #{tlen}s\nclamping to #{tbeg}")
+      nbeg = tbeg
+    end
+
+    fx = %W(trim #{nbeg}s #{nlen}s)
+    nlen != 0 and
+      fx.concat(%W(fade #{fpart.type} #{nlen}s 0 0))
+
+    # likely, the pad section is where fade_cur_fx goes
+    npad > 0 and fx.concat(%W(pad #{npad}s@0s))
+    fx
+  end
+
   # q - quarter of a sine wave
   # h - half a sine wave
   # t - linear (`triangular') slope
diff --git a/lib/dtas/format.rb b/lib/dtas/format.rb
index a76b893..a6314bd 100644
--- a/lib/dtas/format.rb
+++ b/lib/dtas/format.rb
@@ -165,6 +165,7 @@ class DTAS::Format # :nodoc:
   # HH:MM:SS.frac (don't bother with more complex times, too much code)
   # part of me wants to drop this feature from playq, feels like bloat...
   def hhmmss_to_samples(hhmmss)
+    Numeric === hhmmss and return hhmmss * @rate
     time = hhmmss.dup
     rv = 0
     if time.sub!(/\.(\d+)\z/, "")
-- 
cgit v1.2.3-24-ge0c7